First Power up Raspberry Pi Pico, on Raspberry Pi. @AndroidEric
First Power up Raspberry Pi Pico, on Raspberry Pi.  @AndroidEric
Uploaded January 2021 | Updated November 2026, 1 day ago
It's the first time I plug-in the new Raspberry Pi Pico to Raspberry Pi 4B/4G, install MicroPython firmware on Raspberry Pi Pico using Thonny Python IDE, and play around MicroPython REPL.
helloraspberrypi.blogspot.com/2021/01/first-power-up-raspberry-pi-pico-on.html
First Power up Raspberry Pi Pico, on Raspberry Pi.Install CircuitPython 7.2.0 on ESP32-C3 (ESP32-C3-DevKitM-1)XIAO BLE Sense (Arduino framework) IMU USB Mousearduino-esp32, drive SSD1306 I2C OLED with ESP32/S2/C3 using esp8266-oled-ssd1306 libraryESP32 + 2.4 320X240 Display (SPI ILI9341), using TFT_eSPI, prepare user setup file.Drive ESP32-C3-DevKitM-1/ESP32-S2-Saola-1 on-board RGB LED (WS2812) in Arduino FrameworkSimple Bluetooth communication between Raspberry Pi/Python and ESP32/SerialToSerialBTMicroPython/NodeMCU ESP-C3-32S-Kit to control onboard LEDsInstall CircuitPython 7.2.0 on ESP32-S3 (ESP32-S3-DevKitC-1), using esptool v3.2 on Linux MintSetup 4 inch (800x480) HDMI IPS Display on Raspberry PiST7789 SPI (2 240x320/1.54 240x240) IPS RGB Display, on Raspberry Pi Pico/CircuitPythonXIAO BLE Sense (nRF52840)/CircuitPython generate QR Code and display on SSD1306 I2C OLED
an Erik |

First Power up Raspberry Pi Pico, on Raspberry Pi.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER