Install CircuitPython 7.2.0 on ESP32-S3 (ESP32-S3-DevKitC-1), using esptool v3.2 on Linux Mint @AndroidEric

Uploaded March 2022 | Updated September 2026, 2 weeks ago

To flash firmware on esp32s3, esptool v3.2 is needed. This video show the steps to flash CircuitPython 7.2.0 on ESP32-S3-DevKitC-1 N8R8 (with 8MB Flash and 8MB PSRAM) run on Linux Mint (over VirtualBox/Windows 10).

details & code available: embedded-things.blogspot.com/2022/03/install-circuitpython-720-on-esp32-s3.html

Install CircuitPython 7.2.0 on ESP32-S3 (ESP32-S3-DevKitC-1), using esptool v3.2 on Linux Mint

Setup 4 inch (800x480) HDMI IPS Display on Raspberry Pi

ST7789 SPI (2 240x320/1.54 240x240) IPS RGB Display, on Raspberry Pi Pico/CircuitPython

XIAO BLE Sense (nRF52840)/CircuitPython generate QR Code and display on SSD1306 I2C OLED

arduino-esp32 CameraWebServer example, run on ESP32-S2-Saola-1 with ov2640

Install Virtual Keyboard(matchbox-keyboard) on Raspberry Pi

CircuitPython display cursor on displayio, work on Raspberry Pi Pico/ST7789 SPI Display.

Python/Raspberry Pi handle Notification from ESP32 BLE_notify example

Install Arduino IDE on Raspberry Pi OS (32-bit)

ESP32-DevKitC + 2.8inch 240x320 SPI TFT (ILI9341) using TFT_eSPI library

Raspberry Pi Pico/MicroPython: set CPU Frequency vs Temperature, view on ili9341 SPI display.