Uploaded May 2025 | Updated September 2026, 2 weeks ago
This is a link to the Sunfounder BreadBoard Power Bank
amzn.to/4iRfVNQ
(Affiliate Link)
When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Raspberry Pi Pico is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply. If you want to power the Pi Pico by the breadvolt, you should power the pico through the Vsys pin. Complete details on use of a portable power supply on your Pi Pico Projects can be found here:
youtube.com/watch?v=qFjBMZyn7MU
You guys can help me out over at Patreon, and that will help me keep my gear updated, and help me keep this quality content coming:
patreon.com/PaulMcWhorter
In this class we will be using the Sunfounder Raspberry Pi Pico W Keppler Kit. It will make things a lot easier if we are working on identical hardware. the link below is to amazon, and is for the identical hardware I will be using in this entire class.
amzn.to/3ubMRs1
In this video, I describe how you can incorporate an RFID module into your project, and how to program and read RFID tags. We will be using the RFID-RC522 RF module, and several different tags. We use the RFID Tag to unlock the system. Then we keep track of servo position associated with each different card that was used. Enjoy!
More great content at:
toptechboy.com
[Disclosure of Material Connection: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. ]
#raspberrypipicow
#RFID
#tags -
-
*LEGAL DISCLAIMER:*
The code, hardware setups, circuit diagrams, mathematical calculations, and technical methods provided in this video are strictly for educational and demonstration purposes.
All math, code, and instructional content are provided "AS IS", without warranty of any kind, express or implied, including but not limited to guarantees of accuracy, completeness, or fitness for a specific purpose.
All hardware assembly, circuit wiring, and software execution are performed entirely at your own risk. The creator assumes no liability for equipment damage, component failure, data loss, or personal injury resulting from the use or implementation of any information or files presented in this content.
This is a link to the Sunfounder BreadBoard Power Bank
amzn.to/4iRfVNQ
(Affiliate Link)
When using the breadvolt, or any battery power supply on a breadboard project, do not turn the power supply on while the Raspberry Pi Pico is connected to USB, as you could generate voltage conflicts. It is an either or. If the USB is connected, the power supply should be OFF. Or if you are going to connect the USB, first turn off the power supply. If you want to power the Pi Pico by the breadvolt, you should power the pico through the Vsys pin. Complete details on use of a portable power supply on your Pi Pico Projects can be found here:
youtube.com/watch?v=qFjBMZyn7MU
You guys can help me out over at Patreon, and that will help me keep my gear updated, and help me keep this quality content coming:
patreon.com/PaulMcWhorter
In this class we will be using the Sunfounder Raspberry Pi Pico W Keppler Kit. It will make things a lot easier if we are working on identical hardware. the link below is to amazon, and is for the identical hardware I will be using in this entire class.
amzn.to/3ubMRs1
In this video, I describe how you can incorporate an RFID module into your project, and how to program and read RFID tags. We will be using the RFID-RC522 RF module, and several different tags. We use the RFID Tag to unlock the system. Then we keep track of servo position associated with each different card that was used. Enjoy!
More great content at:
toptechboy.com
[Disclosure of Material Connection: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. ]
#raspberrypipicow
#RFID
#tags -
-
*LEGAL DISCLAIMER:*
The code, hardware setups, circuit diagrams, mathematical calculations, and technical methods provided in this video are strictly for educational and demonstration purposes.
All math, code, and instructional content are provided "AS IS", without warranty of any kind, express or implied, including but not limited to guarantees of accuracy, completeness, or fitness for a specific purpose.
All hardware assembly, circuit wiring, and software execution are performed entirely at your own risk. The creator assumes no liability for equipment damage, component failure, data loss, or personal injury resulting from the use or implementation of any information or files presented in this content.
