Uploaded October 2023 | Updated September 2026, 13 minutes ago
An informative dive into the STEDI™ ST3303 Pro LED Light bars with its ecosystem of accessories and supporting products making installation hassle-free.
ST3303 Pro LED Light Bar:
Every good story starts with CREE LEDs. So, we commissioned CREE’s XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn’t sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with a tighter source improves the optic and emitter size relationship – We’ve effectively increased the optic diameter by 40% without physically increasing it. The result is a huge light volume and tremendous beam throw.
Learn More: https://www.stedi.com.au/4x4-driving-lights/led-light-bars/series/st3303.html
Vehicle Specific High Beam Adaptor:
https://www.stedi.com.au/wiring-electrical/vehicle-specific-piggy-back-adaptors.html
Push Button Switch:
https://www.stedi.com.au/rocker-switches.html
ST3303 Pro Coloured End Caps:
Colour Caps to suit ST3303 & ST3301 PRO LED Lightbars ONLY.
Coloured Cap Kit to fit both ends of 1 x ST3303/ST3301 Pro Lightbar
Learn More: https://www.stedi.com.au/stedi-3303tm-pro-colour-caps.html
ST3303 Pro Anti-Theft Kit:
Pre-Configured kit for the new ST3303 Pro LED Light Bars | Side Brackets
Learn More: https://www.stedi.com.au/anti-theft-kit-for-the-st3303-pro-led-light-bars-side-brackets.html
ST3303 Pro Optional Covers:
With most states in Australia limiting any auxiliary lights to a maximum of 4 forward-facing lights, exceeding this number can render the car uncompliant with ADR. When you have exceeded this maximum, covering any exceeding lights with blackout covers whilst driving on public roads will label them as not in use, therefore they are not considered in the overall count.
Learn More: https://www.stedi.com.au/st3303-pro-series-light-bars-optional-covers.html
Vice Bull Bar Brackets:
The STEDI™ Vice Clamp Bull Bar Brackets will meet the versatile application when it comes to side mounted & certain lower-mounted LED light Bars. Made from cast aluminium with stainless steel fasteners keeping it strong yet light weight as well as a polyester UV stable powder coat to reduce fade.
Learn More: https://www.stedi.com.au/vice-bull-bar-tube-clamps-r.html
Roof Bracket to suit Rhino Rack® Platform:
The STEDI™ LED Light Bar mounting bracket to suit the Rhino Rack® Platform has been designed to fit both old and new variants of the Rhino platform. Whether you have the four or five-plank variant, we carefully thought about the bracket geometry to suit every application.
Learn More: https://www.stedi.com.au/led-light-bar-bracket-to-suit-rhino-rack-platform.html
Roof Bracket to suit ARB Base Rack:
Elevate the functionality of the ARB Base Rack. Made to clamp anywhere on all sides of the Base Rack, the STEDI Light Bar Bracket to suit ARB Base Rack supports an endless array of mounting possibilities, without limiting the cargo space of your ARB Base Rack.
Learn More: https://www.stedi.com.au/led-light-bar-bracket-to-suit-arb-base-rack.html
Wiring Concealer:
For the most discerning of vehicle owners, the STEDI™ Wire Concealer helps add the finishing touches to your setup for the most professional of wiring finishes.
Learn More: https://www.stedi.com.au/windshield-cable-channel.html
Wiring Accessories:
https://www.stedi.com.au/wiring-electrical/wiring-accessories.html
Shop the entire STEDI™ Range:
AUS: https://www.stedi.com.au/
USA: stediusa.com
An informative dive into the STEDI™ ST3303 Pro LED Light bars with its ecosystem of accessories and supporting products making installation hassle-free.
ST3303 Pro LED Light Bar:
Every good story starts with CREE LEDs. So, we commissioned CREE’s XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn’t sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with a tighter source improves the optic and emitter size relationship – We’ve effectively increased the optic diameter by 40% without physically increasing it. The result is a huge light volume and tremendous beam throw.
Learn More: https://www.stedi.com.au/4x4-driving-lights/led-light-bars/series/st3303.html
Vehicle Specific High Beam Adaptor:
https://www.stedi.com.au/wiring-electrical/vehicle-specific-piggy-back-adaptors.html
Push Button Switch:
https://www.stedi.com.au/rocker-switches.html
ST3303 Pro Coloured End Caps:
Colour Caps to suit ST3303 & ST3301 PRO LED Lightbars ONLY.
Coloured Cap Kit to fit both ends of 1 x ST3303/ST3301 Pro Lightbar
Learn More: https://www.stedi.com.au/stedi-3303tm-pro-colour-caps.html
ST3303 Pro Anti-Theft Kit:
Pre-Configured kit for the new ST3303 Pro LED Light Bars | Side Brackets
Learn More: https://www.stedi.com.au/anti-theft-kit-for-the-st3303-pro-led-light-bars-side-brackets.html
ST3303 Pro Optional Covers:
With most states in Australia limiting any auxiliary lights to a maximum of 4 forward-facing lights, exceeding this number can render the car uncompliant with ADR. When you have exceeded this maximum, covering any exceeding lights with blackout covers whilst driving on public roads will label them as not in use, therefore they are not considered in the overall count.
Learn More: https://www.stedi.com.au/st3303-pro-series-light-bars-optional-covers.html
Vice Bull Bar Brackets:
The STEDI™ Vice Clamp Bull Bar Brackets will meet the versatile application when it comes to side mounted & certain lower-mounted LED light Bars. Made from cast aluminium with stainless steel fasteners keeping it strong yet light weight as well as a polyester UV stable powder coat to reduce fade.
Learn More: https://www.stedi.com.au/vice-bull-bar-tube-clamps-r.html
Roof Bracket to suit Rhino Rack® Platform:
The STEDI™ LED Light Bar mounting bracket to suit the Rhino Rack® Platform has been designed to fit both old and new variants of the Rhino platform. Whether you have the four or five-plank variant, we carefully thought about the bracket geometry to suit every application.
Learn More: https://www.stedi.com.au/led-light-bar-bracket-to-suit-rhino-rack-platform.html
Roof Bracket to suit ARB Base Rack:
Elevate the functionality of the ARB Base Rack. Made to clamp anywhere on all sides of the Base Rack, the STEDI Light Bar Bracket to suit ARB Base Rack supports an endless array of mounting possibilities, without limiting the cargo space of your ARB Base Rack.
Learn More: https://www.stedi.com.au/led-light-bar-bracket-to-suit-arb-base-rack.html
Wiring Concealer:
For the most discerning of vehicle owners, the STEDI™ Wire Concealer helps add the finishing touches to your setup for the most professional of wiring finishes.
Learn More: https://www.stedi.com.au/windshield-cable-channel.html
Wiring Accessories:
https://www.stedi.com.au/wiring-electrical/wiring-accessories.html
Shop the entire STEDI™ Range:
AUS: https://www.stedi.com.au/
USA: stediusa.com
