Uploaded December 2023 | Updated September 2026, 2 hours ago
STEDI™ has always been known for bringing the ability to add a personal flare to a product that was always seen as purely functional. With the ST3301 / ST3303 Pro Series of LED Light Bars, we added the ability to alter the accent colour of the included orange and grey caps, to others in our growing range of available options.
For almost a decade, the name STEDI™ has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia.
Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI™ offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI™.
Every good story starts with CREE LEDs. So, we commissioned CREE’s XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn’t sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with a tighter source improves the optic and emitter size relationship – We’ve effectively increased the optic diameter by 40% without physically increasing it. The result is a huge light volume and tremendous beam throw.
Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, that the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw.
ST3303 Pro LED Light Bar: https://www.stedi.com.au/4x4-driving-lights/led-light-bars/series/st3303.html
ST3301/ST3303 Pro Coloured End Caps: https://www.stedi.com.au/stedi-quad-pro-coloured-cap-kit.html
Shop the entire STEDI™ Range
AUS: https://www.stedi.com.au/
US: stediusa.com
STEDI™ has always been known for bringing the ability to add a personal flare to a product that was always seen as purely functional. With the ST3301 / ST3303 Pro Series of LED Light Bars, we added the ability to alter the accent colour of the included orange and grey caps, to others in our growing range of available options.
For almost a decade, the name STEDI™ has stood for cutting-edge design and market-leading performance. The ST3303-PRO is an aggregation of all things that have made us the globally distributed, coveted brand born right here in Australia.
Unquestionably, ST3303 PRO sits at the pinnacle of the STEDI™ offering. A pure expression of capability and design that converges with brutal performance, making the all-new ST3303 PRO unmistakably STEDI™.
Every good story starts with CREE LEDs. So, we commissioned CREE’s XPL HI emitter, which represents a +9% increase in lumen output at the same drive current over the already great (but now aging) CREE XM-L2 found in the previous model. 9% doesn’t sound like much, but the kicker is that the emitter die size drops down from 5 x 5mm to 3.5 x 3.5mm. Higher lumen density with a tighter source improves the optic and emitter size relationship – We’ve effectively increased the optic diameter by 40% without physically increasing it. The result is a huge light volume and tremendous beam throw.
Where others stop, we get started. The current draw is enormous, and quite literally unlike anything else on the market. The 60 LED variant draws 36 amp at 13.6v & @ 12.5v 40 amp. Have we got your attention yet? Now, you must, without any exception, we repeat, you must use the heavy-duty, dual relay (yes dual relay!), dual fused wiring harness we supply. The current is so intense, that the 40 LED and 60 LED bars have two separate power cables (yes two separate power cables!) on either side of the light bar, and two separate breathers (yep two!) to deal with the enormous current draw.
ST3303 Pro LED Light Bar: https://www.stedi.com.au/4x4-driving-lights/led-light-bars/series/st3303.html
ST3301/ST3303 Pro Coloured End Caps: https://www.stedi.com.au/stedi-quad-pro-coloured-cap-kit.html
Shop the entire STEDI™ Range
AUS: https://www.stedi.com.au/
US: stediusa.com
