Clickspring
Home Machine Shop Tool Making - Machining A Tailstock Die Holder For The Sherline Lathe - Part 2
updated
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Robin Haerens
Charles Frodsham & Co.
Thomas Veilleux
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/48Ofcac
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
Geevorks Spotting Drill Bit, M42 HSS High Speed Steel Drill Bit Set,7PCS 90 Degree Drilling Chamfering Tool - 3 4 5 6 8 10 12mm: amzn.to/48KiTO5
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Dialux Metal Polishing Compound White and Grey 4oz 1/4b: amzn.to/3vopCPo
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
matt mcparland
________________________________________________________
References/Further Reading:
Posidonius - en.wikipedia.org/wiki/Posidonius
Geminus - en.wikipedia.org/wiki/Geminus
Hipparchus - en.wikipedia.org/wiki/Hipparchus
Vitruvius - chenarch.com/images/arch-texts/0000-Vitruvius-50BC-Ten-Books-of-Architecture.pdf
Cicero, DE NATVRA - web.archive.org/web/20070316053820/http://www.thelatinlibrary.com/cicero/nd2.shtml#88
Metal Working in the Ancient World ( doi.org/10.2307/500498 ) - Author(s): Herbert Maryon – 1949
Herbert Maryon - en.wikipedia.org/wiki/Herbert_Maryon
Wright, M. T. 2011. “The Antikythera Mechanism: Reconstruction as a Medium for Research and Publication.”
"Clockwork Before The Clock" D Price Horological Journal vol.098 No.01 Jan 1956
Stone Vessel Making - http://www.oocities.org/unforbidden_geology/ancient_egyptian_stone_vase_making.html
The Woodturning Lathe: A Brief History - highlandwoodworking.com/woodnews/december_2005/employee_contribution.htm
The Ancient Craft of the Pole Lathe Woodturner. - https://www.academia.edu/7511378/The_Ancient_Craft_of_the_Pole_Lathe_Woodturner
Tomb of Petosiris: core.ac.uk/reader/80518060
Ancient greek furniture - https://www1.up.poznan.pl/furnituredesign/sites/default/files/u8/56-62_Ancient-greek-furniture_-source-of-inspiration-for-the-designers-and-manufacturers-of-modern-times.pdf
Woodturning with Moroccan bow lathe - youtu.be/RMQrz1gJy9M
Moroccan Bow Lathe - youtube.com/watch?v=wnv0DAR_gWA
https://2.bp.blogspot.com/-To97wy-WU-o/TpMEKgb-d-I/AAAAAAAAArU/Zfp6G-Kkhpg/s1600/Artisan+%25234.jpg
https://2.bp.blogspot.com/-4G5eJPO4dek/WvMfYzOlWGI/AAAAAAAAB_Y/68koyB7VZIoHDFMy-RtLmicSG3Z4UpboACEwYBhgL/s1600/P1190313%2Br.jpg
Here is an extended cut of the engraving work done for the Watchmaker's Faceplate. You can find the build video here: youtu.be/X4xy7TFkxsg
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
________________________________________________________
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
Cheers,
Chris.
ps You can find the extended cut of the engraving here: youtu.be/piqPfPU4l78
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
John S Dilsaver
________________________________________________________
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Lathework: A Complete Course (Workshop Practice Series)" - amzn.to/3Zt1DJM
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Heavy Duty Arbor Press: - amzn.to/46HdTZV
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Dykem 80300 Steel Blue Layout Fluid: amzn.to/3LvNAO8
Bergeon Professional Cleaning Rodico: amzn.to/3LyKKb3
Blue Matador Abrasive Paper: amzn.to/3PRnQhJ
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/3PNNK5M
General Purpose Latex Finger Cots: amzn.to/3ZsYrhi
Proxxon 28174 Band saw blade for MBS/E Swedish steel, fine (24 TPI), Silver|Silver metallic: amzn.to/3RzIV1l
A new TGT for you on the vacuum casting machine I use for lost resin casting, do please enjoy!
Cheers,
Chris.
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
Lea Bruder
Armagus
-------------- Video Notes: ---------------
Small to medium studio & home shop vacuum casting machines for comparison:
riogrande.com/product/rio-vacuum-casting-and-investing-machine/705108
riogrande.com/product/dura-bull-tabletop-vacuum-investing-and-casting-machine-system/704303
riogrande.com/product/v-i-c-9-tabletop-casting-machines/705107gp
riogrande.com/product/v-i-c-12-tabletop-solid-and-perforated-flask-casting-machines/705118gp
Reference/Source Information for the design:
youtube.com/watch?v=EGNnH_xbjR4&t=761s
youtube.com/watch?v=tdxiZs0MDbs
youtube.com/watch?v=RThrVi5q-f8
youtube.com/watch?v=X0yvtw9ERGc
youtube.com/watch?v=3BikL2yIDic
youtube.com/watch?v=MBWHt5Pt5rI
youtube.com/watch?v=ZFrWtjMBk7k
Component links:
Vacuum Chamber: amazon.com/Upgraded-Stainless-Stabilizing-Degassing-Silicones/dp/B08YX4V31F/ref=sr_1_8?dchild=1&keywords=vacuum+chamber&qid=1622438130&sr=8-8
Vacuum Pump: http://www.jbind.com/products/product-search-detail.aspx?SKU=DV-6E-250
Neutec Flanged Flasks: riogrande.com/product/neutec-superperf-flanged-flasks-with-cross-bars/702184ngp
Gaskets: riogrande.com/product/silicone-flask-gaskets/710390gp
contenti.com/silicone-rubber-gaskets
Sprue Bases: riogrande.com/product/rubber-round-button-c-style-sprue-bases/702706gp
Certus Optima Investment: certus-int.com/optima
Model Links
Leon: cults3d.com/en/3d-model/art/leon-tedalvarez
Oil Lamp Base & Body .stl files: patreon.com/file?h=51956266&i=8151182
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Consumables:
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
Lea Bruder
Armagus
-------------- Video Notes: ---------------
File Downloads (Be sure to COPY/PASTE the links):
Cutter Sharpening Tool Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_metric.pdf
Cutter Sharpening Tool Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_inch.pdf
Clickspring Universal Gear Calculator: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_universal_gear_cutter_geometry_calculator_v3.7.3.xlsx
Cutter Forming Tools Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_metric.pdf
Cutter Forming Tools Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_inch.pdf
Cutter Blank Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_metric.pdf
Cutter Blank Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_inch.pdf
Some top resources on Gear Theory:
John Stevenson's Blog Post - http://metalwebnews.com/howto/gear/gear1.html
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
JM Wild - "Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tony's gear videos:
youtube.com/watch?v=Q-XOM4E4RZQ
youtube.com/watch?v=ds6qZ7Ss2fA
Stefan on the subject of sharpening, and a discussion on profile error: youtube.com/watch?v=7sxq5khqeWI
Mr Pete's Gear Videos:
youtube.com/watch?v=JMhYuXx35Ik
youtube.com/watch?v=12sdMFr5CNU
youtube.com/watch?v=2lPNqn8LU4Q
youtube.com/watch?v=dQVUI1YhN0E
youtube.com/watch?v=mXU-URNdUFU
youtube.com/watch?v=Dipd0ohrYzg
Andy Pugh's Gear hobbing video's:
youtu.be/ZhICrb0Tbn4
youtu.be/xdE46yvckbM
"The Watchmakers' Lathe " Ward Goodrich - amzn.to/2Wijchr
Hugh Sparks - csparks.com/watchmaking/CycloidalGears/index.jxl
"The Clock & Watch Makers Guide to Gear Making" Porter - amzn.to/2xuFP7I
Online Gear Generator: geargenerator.com
Alan Pinkus’s Gear Generator - http://www.micro-machine-shop.com/gears.htm#Gearotic_Motion
Matthias Wandels gear generator: woodgears.ca/gear_cutting/template.html
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
"Workshop practice Series": amzn.to/2WgeGh0
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
Lea Bruder
Armagus
-------------- Video Notes: ---------------
File Downloads (Be sure to COPY/PASTE the links):
Cutter Sharpening Tool Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_metric.pdf
Cutter Sharpening Tool Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_inch.pdf
Clickspring Universal Gear Calculator: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_universal_gear_cutter_geometry_calculator_v3.7.3.xlsx
Cutter Forming Tools Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_metric.pdf
Cutter Forming Tools Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_inch.pdf
Cutter Blank Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_metric.pdf
Cutter Blank Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_inch.pdf
Some top resources on Gear Theory:
John Stevenson's Blog Post - http://metalwebnews.com/howto/gear/gear1.html
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
JM Wild - "Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tony's gear videos:
youtube.com/watch?v=Q-XOM4E4RZQ
youtube.com/watch?v=ds6qZ7Ss2fA
Stefan on the subject of sharpening, and a discussion on profile error: youtube.com/watch?v=7sxq5khqeWI
Mr Pete's Gear Videos:
youtube.com/watch?v=JMhYuXx35Ik
youtube.com/watch?v=12sdMFr5CNU
youtube.com/watch?v=2lPNqn8LU4Q
youtube.com/watch?v=dQVUI1YhN0E
youtube.com/watch?v=mXU-URNdUFU
youtube.com/watch?v=Dipd0ohrYzg
Andy Pugh's Gear hobbing video's:
youtu.be/ZhICrb0Tbn4
youtu.be/xdE46yvckbM
"The Watchmakers' Lathe " Ward Goodrich - amzn.to/2Wijchr
Hugh Sparks - csparks.com/watchmaking/CycloidalGears/index.jxl
"The Clock & Watch Makers Guide to Gear Making" Porter - amzn.to/2xuFP7I
Online Gear Generator: geargenerator.com
Alan Pinkus’s Gear Generator - http://www.micro-machine-shop.com/gears.htm#Gearotic_Motion
Matthias Wandels gear generator: woodgears.ca/gear_cutting/template.html
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
"Workshop practice Series": amzn.to/2WgeGh0
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
John Maksim
RuKiddin06
RobinP556
-------------- Video Notes: ---------------
File Downloads (Be sure to COPY/PASTE the links):
Cutter Sharpening Tool Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_metric.pdf
Cutter Sharpening Tool Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_inch.pdf
Clickspring Universal Gear Calculator: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_universal_gear_cutter_geometry_calculator_v3.7.3.xlsx
Cutter Forming Tools Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_metric.pdf
Cutter Forming Tools Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_inch.pdf
Cutter Blank Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_metric.pdf
Cutter Blank Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_inch.pdf
Some top resources on Gear Theory:
John Stevenson's Blog Post - http://metalwebnews.com/howto/gear/gear1.html
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
JM Wild - "Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tony's gear videos:
youtube.com/watch?v=Q-XOM4E4RZQ
youtube.com/watch?v=ds6qZ7Ss2fA
Stefan on the subject of sharpening, and a discussion on profile error: youtube.com/watch?v=7sxq5khqeWI
Mr Pete's Gear Videos:
youtube.com/watch?v=JMhYuXx35Ik
youtube.com/watch?v=12sdMFr5CNU
youtube.com/watch?v=2lPNqn8LU4Q
youtube.com/watch?v=dQVUI1YhN0E
youtube.com/watch?v=mXU-URNdUFU
youtube.com/watch?v=Dipd0ohrYzg
Andy Pugh's Gear hobbing video's:
youtu.be/ZhICrb0Tbn4
youtu.be/xdE46yvckbM
"The Watchmakers' Lathe " Ward Goodrich - amzn.to/2Wijchr
Hugh Sparks - csparks.com/watchmaking/CycloidalGears/index.jxl
"The Clock & Watch Makers Guide to Gear Making" Porter - amzn.to/2xuFP7I
Online Gear Generator: geargenerator.com
Alan Pinkus’s Gear Generator - http://www.micro-machine-shop.com/gears.htm#Gearotic_Motion
Matthias Wandels gear generator: woodgears.ca/gear_cutting/template.html
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
"Workshop practice Series": amzn.to/2WgeGh0
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
-------------- Video Notes: ---------------
File Downloads (Be sure to COPY/PASTE the links):
Cutter Sharpening Tool Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_metric.pdf
Cutter Sharpening Tool Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_inch.pdf
Clickspring Universal Gear Calculator: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_universal_gear_cutter_geometry_calculator_v3.7.3.xlsx
Cutter Forming Tools Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_metric.pdf
Cutter Forming Tools Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_forming_tools_-_inch.pdf
Cutter Blank Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_metric.pdf
Cutter Blank Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_blank_-_inch.pdf
Some top resources on Gear Theory:
John Stevenson's Blog Post - http://metalwebnews.com/howto/gear/gear1.html
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
JM Wild - "Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tony's gear videos:
youtube.com/watch?v=Q-XOM4E4RZQ
youtube.com/watch?v=ds6qZ7Ss2fA
Stefan on the subject of sharpening, and a discussion on profile error: youtube.com/watch?v=7sxq5khqeWI
Mr Pete's Gear Videos:
youtube.com/watch?v=JMhYuXx35Ik
youtube.com/watch?v=12sdMFr5CNU
youtube.com/watch?v=2lPNqn8LU4Q
youtube.com/watch?v=dQVUI1YhN0E
youtube.com/watch?v=mXU-URNdUFU
youtube.com/watch?v=Dipd0ohrYzg
Andy Pugh's Gear hobbing video's:
youtu.be/ZhICrb0Tbn4
youtu.be/xdE46yvckbM
"The Watchmakers' Lathe " Ward Goodrich - amzn.to/2Wijchr
Hugh Sparks - csparks.com/watchmaking/CycloidalGears/index.jxl
"The Clock & Watch Makers Guide to Gear Making" Porter - amzn.to/2xuFP7I
Online Gear Generator: geargenerator.com
Alan Pinkus’s Gear Generator - http://www.micro-machine-shop.com/gears.htm#Gearotic_Motion
Matthias Wandels gear generator: woodgears.ca/gear_cutting/template.html
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
"Workshop practice Series": amzn.to/2WgeGh0
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
A little mini-series on shop made gear cutters - please do enjoy Part 1, more to follow shortly.
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
________________________________________________________
-------------- Video Notes: ---------------
File Downloads (Be sure to COPY/PASTE the links):
Clickspring Universal Gear Calculator: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_universal_gear_cutter_geometry_calculator_v3.7.3.xlsx
Cutter Sharpening Tool Metric: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_metric.pdf
Cutter Sharpening Tool Inch: clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_cutter_sharpener_-_inch.pdf
Some top resources on Gear Theory:
John Stevenson's Blog Post - http://metalwebnews.com/howto/gear/gear1.html
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
JM Wild - "Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tony's gear videos:
youtube.com/watch?v=Q-XOM4E4RZQ
youtube.com/watch?v=ds6qZ7Ss2fA
Stefan on the subject of sharpening, and a discussion on profile error: youtube.com/watch?v=7sxq5khqeWI
Mr Pete's Gear Videos:
youtube.com/watch?v=JMhYuXx35Ik
youtube.com/watch?v=12sdMFr5CNU
youtube.com/watch?v=2lPNqn8LU4Q
youtube.com/watch?v=dQVUI1YhN0E
youtube.com/watch?v=mXU-URNdUFU
youtube.com/watch?v=Dipd0ohrYzg
Andy Pugh's Gear hobbing video's:
youtu.be/ZhICrb0Tbn4
youtu.be/xdE46yvckbM
"The Watchmakers' Lathe " Ward Goodrich - amzn.to/2Wijchr
Hugh Sparks - csparks.com/watchmaking/CycloidalGears/index.jxl
"The Clock & Watch Makers Guide to Gear Making" Porter - amzn.to/2xuFP7I
Online Gear Generator: geargenerator.com
Alan Pinkus’s Gear Generator - http://www.micro-machine-shop.com/gears.htm#Gearotic_Motion
Matthias Wandels gear generator: woodgears.ca/gear_cutting/template.html
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
WO Davis – “Gears For Small Mechanisms”: amzn.to/2Yj2Ben
"Workshop practice Series": amzn.to/2WgeGh0
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Blazer GB2001 Self-Igniting Butane Micro-Torch: amzn.to/3f5Gzlh
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Consumables:
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Here's a summary of what I've learned so far from my little electroplating system - do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
________________________________________________________
-------------- Video Notes: ---------------
Plating Machine & Supplies (no affiliation): goldplating.com/collections/jewelry-plating-kits/products/jewelmaster-option-1-3-anodes-no-chemicals
(Amazon Affiliate links)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Hegner Scroll Saw: amzn.to/2IhteVW
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Consumables:
Renaissance Microcrystalline Wax Polish: amzn.to/2uic7l2
WR Smith "Rub N Brite" Polish: wrsmithclocks.com/product/rub-n-brite
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Its time for a deep dive on learning to engrave - Please enjoy!
Cheers,
Chris.
Btw I ended up cutting a lot of the engraving footage to keep the video moving along, but you can watch slightly longer versions of 3 of the plates being engraved here:
Plate I: youtu.be/05VwRMdvI7w
Plate II: youtu.be/qIXeXw_WdQY
Plate III: youtu.be/epMLhIshQRA
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
RobinP556
________________________________________________________
Video Notes:
(Amazon Affiliate links)
Engraving study material that I use:
BOOKS
"The Art Of Engraving" (James B Meek): amzn.to/2qa2McL
"Drawing & Understanding Scroll Designs" (Ron Smith): amzn.to/2NxNINZ
"Advanced Drawing Of Scrolls" (Ron Smith): amzn.to/2JCoc9g
DVD's
"Learn Old School Hammer & Chisel Engraving" (Sam Alfano): amzn.to/2N4pRGH
"Engraving Scrollwork From Start To Finish" (Sam Alfano): amzn.to/2BYV3kj
"The Essential Guide To Drawing Scrolls" (Sam Alfano): amzn.to/2Wx4Do5
"The Experts Guide To Graver Sharpening" (Sam Alfano): amzn.to/2Ntte9b
My Engraving Tools:
Gravermach AT: amzn.to/2PD7lHc
Airtact Monarch handpiece: amzn.to/31YjGbC
Powerhone: grs.com/product/graverhone-vs-110-v
Leica A60 Microscope: amzn.to/3VET1xU
Val-Air Compressor: grs.com/product/val-air-air-compressor
Sam Alfano Chisel Handle: grs.com/product/sam-alfano-chisel-handle
Chasing Hammer: grs.com/product/grs-chasing-hammer-round-single
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
4 Arkansas Stones + case: http://amzn.to/2HCOAMX
EZE-LAP Set SF/F/M/C/XC Color Coded Diamond Hones: amzn.to/2BZUbvX
Thermo-lock work holding putty - amzn.to/44AHCmS
Part 3 of the Watchmaker's Faceplate build, do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
John Maksim
RobinP556
Lea Bruder
Armagus
________________________________________________________
Video Notes:
Final music track is "Fading" by Sappheiros - visit soundcloud.com/sappheirosmusic
References:
Archie B. Perkins, The Modern Watchmakers Lathe And How To Use It. (Ohio: American Watchmakers-Clockmakers Institute, 2003), pp 205-208.
Henry B. Fried. Bench Practices For Watch And Clockmakers. amzn.to/44A5oyY (New York: Columbia Communications, 1974), pp 163-170.
George Daniels. Watchmaking. amzn.to/2V8ljSe (London: Philip Wilson Publishers, 2011), pp 14-18.
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Its time for some more shop made tools - Please enjoy!
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
-------------- Video Notes: ---------------
Scriber video on MAKE: youtube.com/watch?v=o8Bd8G21Vv8
Related Videos:
Making a metal scriber on Make: youtu.be/o8Bd8G21Vv8
John from NYCCNC on Speeds & Feeds: youtu.be/uw8uL2jjEBs
Filing Tips: youtu.be/h4KaiG7CpSQ?t=58
Making a D-Bit Single Flute Milling Cutter: youtu.be/jlNxvnOxMCE
Centering square stock in a 4 jaw chuck: youtu.be/MYI1slVGziU?t=106
Drawings for hammer and countersinks (zip file): clickspringprojects.com/uploads/3/8/2/2/38221101/tgt7_drawings.zip
Project #1 - Metal Scriber
Materials:
(3/16 in to ¼ in rod) x 130mm (approx) Brass (free machining)
1 x Sewing needle
Project #2 - Pin Chamfering Tool
Materials:
¼ in Drill rod (aka Silver Steel) x 125mm
Project #3 - Single Lip Countersink
Materials:
7/16 in Drill rod (aka Silver Steel) x 60mm
¼ in mild steel x 80mm
Project #4 - Jewellers Hammer
Materials:
½ in x ½ in x 88mm Brass (free machining)
½ in x ½ in x 88mm O1 tool steel
20mm x 275mm Hickory dowel
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Anytime Tools 5 Lathe Mill CENTER DRILL : amzn.to/2IThppO
Loctite 231097 603 Retaining Compound, 10 mL: http://amzn.to/2pid6vR
Dykem blue: http://amzn.to/2plmLlx
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit: amzn.to/2Pmegkq
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Boric Acid Powder, 6 oz.: amzn.to/2PjfnkF
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
Cheers :)
Red Lathe: SIEG SC4
Blue Lathe: Weiss WM 250V-F
Sherline: Sherline 4100 (Metric)
(Retired Green Lathe: CQ6125)
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
-------------- Video Notes: ---------------
Sherline Thread Cutting Attachment: sherline.com/product/3100-thread-cutting-attachment
Tubalcain Tailstock Alignment videos: youtube.com/watch?v=WLXL3cdnbpM youtube.com/watch?v=tqjO4yPvhQs
Lathe Leveling with Tony:
youtube.com/watch?v=THkb-x35fwc
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Dykem blue: http://amzn.to/2plmLlx
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Books:
Daniels' Watchmaking: http://amzn.to/2FH3cyh
Malcolm Wilds' Wheel & Pinion Cutting in Horology: http://amzn.to/2HI6ca9
Clock & Watch Escapements: http://amzn.to/2FIEaic
Practical Watch Repairing: http://amzn.to/2tUyThX
Practical Clock Repairing: http://amzn.to/2HCey35
The Science of Clocks & Watches: http://amzn.to/2HIyuBA
Watch and Clock Making and Repairing: http://amzn.to/2pfdT0U
Casting Practice - The Ten Rules of Castings: http://amzn.to/2HF3VfL
The Model Engineer's Workshop manual: http://amzn.to/2G43VsV
Model Engineer's handbook: http://amzn.to/2FPxwmq
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
A new TGT episode all about the shop made foundry pyrometer, do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
-------------- Video Notes: ---------------
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Ingot Moulds: http://amzn.to/2pfpgWz
K-Type Digital Thermometer: http://amzn.to/2FFuGUN
High Temp K-Type Thermocouple: ebay.com/p/27004725848
K Type Cable Connectors/Male Thermocouple Adapters: ebay.com/itm/364155774454
10mm Carbon Rods: ebay.com/itm/385153939655
A bit of detail on setting up your own home machine shop. Be sure to share your thoughts & advice in the comments below!
Cheers,
Chris
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
-------------- Video Notes: ---------------
Links for books:
"Watchmaking" by Daniels: http://amzn.to/2FH3cyh
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
"Clock & Watch Escapements": http://amzn.to/2FIEaic
"Practical Watch Repairing": http://amzn.to/2tUyThX
"Practical Clock Repairing": http://amzn.to/2HCey35
"The Science of Clocks & Watches": http://amzn.to/2HIyuBA
"Watch and Clock Making and Repairing": http://amzn.to/2pfdT0U
"Casting Practice - The Ten Rules of Castings": http://amzn.to/2HF3VfL
"The Model Engineer's Workshop manual": http://amzn.to/2G43VsV
"Model Engineer's handbook": http://amzn.to/2FPxwmq
"Workshop practice Series": http://amzn.to/2DyPs2D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears and Gear Cutting", Ivan Law: http://amzn.to/2FKmaUI
Tools & Products:
Dykem blue: http://amzn.to/2plmLlx
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YouTube videos on grinding HSS lathe tools:
youtube.com/watch?v=__A2xtLF0AU
youtube.com/watch?v=hrDr4rYLiAk
youtube.com/watch?v=dRyqIm5JR5s
youtube.com/watch?v=HTQ46NMMc88
Part 2 of the Watchmaker's Faceplate build, do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
References:
Archie B. Perkins, The Modern Watchmakers Lathe And How To Use It. (Ohio: American Watchmakers-Clockmakers Institute, 2003), pp 205-208.
Henry B. Fried. Bench Practices For Watch And Clockmakers. amzn.to/44A5oyY (New York: Columbia Communications, 1974), pp 163-170.
George Daniels. Watchmaking. amzn.to/2V8ljSe (London: Philip Wilson Publishers, 2011), pp 14-18.
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
By request the full detail on my furnace, please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Andrew Smith
Bernd Fischer
Sam Towne
Jack Cause
Jeremiah G. Mort
Andre van Soest
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
Furnace Dimensions:
Outside shell constructed from 0.8mm mild steel sheet, with spot weld joins. For the inside insulation details, refer to video.
Lid - Outside shell 330mm x 50mm, with a center hole in the top of 100mm OD. The actual OD of the exhaust hole is further reduced to approx 60mm after application of insulation/ITC100.
Body - Outside shell 330mm x 230mm. Central cavity has diameter of approx 220mm after application of insulation/ITC100.
Base - Outside shell 330mm x 90mm, with diameter of cast channel = 220mm. The Plinth OD is 150mm, giving a channel width of 35mm.
Regulator
BOC Gases 6000 LPG Regulator https://www.boc.com.au/shop/en/au/boc-6000-single-stage-lpg-regulator
Brass Fittings for the Reil Burner
Hose Barb to Female (Parker product code: 126HBL-4-2) http://amzn.to/2u0lCVo
End Cap (Parker product code: 213P-2) mscdirect.com/product/details/83295048
Long Nipple (Parker product code: 215PNL-2-30) http://amzn.to/2FNF11m
Steel Fittings for the Reil Burner
¾" Black Coupling http://www.supplyhouse.com/sh/control/product/~product_id=BLC075
1½" x ¾" Black Reducing Coupling amzn.to/3D21LFg
¾ " x 6" Black Pipe Nipple amzn.to/3Tw6Exy
1 ½" Close Black Pipe Nipple amzn.to/3CWNF8s
Refractory, Insulation & Crucible
1400C Castable Refractory https://consolidatedrefractories.com.au/products/castables/
1400C Ceramic Fiber Blanket (25mm) https://consolidatedrefractories.com.au/products/castables/
ITC100 (High performance hot face ceramic) sourced from http://www.pinches.com.au
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Ingot Moulds: http://amzn.to/2pfpgWz
Fiberfrax Rigidiser (Colloidal Silica ceramic wool rigidiser) unifrax.com/product/rigidizer-w
Sodium Silicate(High temperature adhesive) https://bacto.com.au/index.php?route=product/product&product_id=10251&search=sodium+silicate
Rubbedin Hot Spot Mortar 1400C (For tuning the tuyere) https://rubbedin.com.au/product/hotspot-ready-to-use-mortar/
Petrobond Sand: amzn.to/3TPESvx
References:
The Ron Reil Burner design: abana.org/ronreil/design1.shtml
The Navy Foundrymans Handbook: http://archive.hnsa.org/doc/foundry
John Campbells Casting Books, eg The Ten Rules Of Casting Practice: http://amzn.to/2HF3VfL
Backyardmetalcasting: http://www.backyardmetalcasting.com
Thehomefoundry: http://forums.thehomefoundry.org/index.php?forums/furnaces-and-their-construction.2
Mr Pete: youtube.com/watch?v=dZGq1zCl4yM&list=PL69F982076354AC97
luckygen1001: youtube.com/watch?v=gXlQ7ZoRdMo
myfordboy: youtube.com/watch?v=tTPdybtO-a0
Jeff Williams: youtube.com/watch?v=12yml4x07pc
FZ- making knives: youtube.com/watch?v=1_wmr_coylE
Lundgren Bronze Studios: youtube.com/watch?v=JyLMTD5ReaM
VOGMAN: youtube.com/watch?v=n42t3M1fOyY
Corporals Corner: youtube.com/watch?v=smpLLVBCBLI
eddie2799: youtube.com/watch?v=RYr5wazDtII
Black Beard Projects: youtube.com/watch?v=yDBTageZeM0
bigstackD Casting: youtube.com/watch?v=djEnkB8PH-s
Don Brandt: youtube.com/watch?v=scySKz3mGcI
Lost & Foundry: youtube.com/watch?v=rC74X_O1ayU
Lunarburn Studio: youtube.com/watch?v=m8cKNj4LKp4
swdweeb: youtube.com/watch?v=iMCaic-0-hc
Brian Oltrogge: youtube.com/watch?v=F71fb7HreMQ
Make it Extreme: youtube.com/watch?v=QK6iSgRrNXM
Mr. Craft: youtube.com/watch?v=auG1imVufn0
FarmCraft101: youtube.com/watch?v=1YO7ymbbNLQ
Mateusz Doniec: youtube.com/watch?v=nmU5jjssTss
... and many more builds that I've seen but don't recall precisely where - thank you!
A bit of tool'ception to close out the year! This one will make an appearance in the dial indicator project and I expect in several other projects too.
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Steven R. Crider
Gary Levario
Mark Coburn
Pete Askew
Jeff Armstrong
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
PaxAndromeda
Thomas Eriksen
Michael Hardel
Tim Ball
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
References:
Archie B. Perkins, The Modern Watchmakers Lathe And How To Use It. (Ohio: American Watchmakers-Clockmakers Institute, 2003), pp 205-208.
Henry B. Fried. Bench Practices For Watch And Clockmakers. amzn.to/44A5oyY (New York: Columbia Communications, 1974), pp 163-170.
George Daniels. Watchmaking. amzn.to/2V8ljSe (London: Philip Wilson Publishers, 2011), pp 14-18.
(Amazon Affiliate links to items used in this video)
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Books:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Machinery's handbook": http://amzn.to/2pi7XE5
"Drills, Taps and Dies", Tubal Cain: amzn.to/3wUFNA7
"Hardening, Tempering & Heat Treatment", Tubal Cain: http://amzn.to/2IdTQLw
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Interapid Dial Test Indicator: http://amzn.to/2FPInwH
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Magnetic Base Adjustable Metal Test Indicator Holder Digital Level 14" - Tool Stand: amzn.to/2PkyoTV
Proxxon 37172 Micro Band Saw MBS/E: amzn.to/2ONORR1
Anytime Tools Angle Block Set 1°, 2°, 3°, 4°, 5°, 10°, 15°, 20°, 25°, 30° Precision +/- 20 Seconds, Machinist Tool, 10 Piece Set: amzn.to/2QFqM2Y
Hey Folks,
Please enjoy TGT#2, all about that fancy digital indexer!
Cheers,
Chris.
(I have no affiliation with any of the products mentioned)
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Matthew Middleton
Thomas Veilleux
Dave Seff
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
As I mentioned in the video there are many different methods to index a lathe spindle, each with its own pro's and cons.
My favourite shop teacher covers one simple way of doing it, in typical YouTubalCain style here:
youtu.be/ZlKHrhAz8M8?t=13m39s (Thank you Marc Banks for the link)
Tom Walter shows his method using a spare gear: youtube.com/watch?v=hziF9y1qLZ8
Yet another approach from Johnny Q90: youtube.com/watch?v=SJ0d5wFjXQI
The two professionally manufactured CNC indexers of which I am aware:
Divisionmaster: (Note: The original Divisionmaster is no longer in production, however a similar item can be found linked on this page: http://www.jeffree.co.uk/modelengineering.html )
Sherline CNC Rotary Table Indexer: http://amzn.to/2FJXmfv
No doubt there are other commercial variants out there, these are just the two that I have researched, and of course I ended up purchasing one of them.
There are also a few home brew versions out there, so be sure to let me know what else is available in the comments below.
Recorded some time ago, this new-to-Youtube series is all about our favourite subject: Tools! Do please enjoy :)
If you'd like to see more of this on-going #shoptour video series, let me know in the comment below.
Cheers,
Chris.
By the way, there are some great videos out there on these vise sub tables/mini pallets/pallet vises. Tom Lipton's is well known (youtu.be/b2qKy43tJcY?t=4m59s), Colin from CompEdgeX did a great one a while back (youtu.be/lYPF4iEe9X0?t=5m21s), as did Keith Rucker: youtu.be/OQ76RUm-egI?t=32m20s
Of course if you don't want to drive yourself crazy drilling all those holes, you can buy something similar machined to NYCCNC perfection from John Saunders here: saundersmachineworks.com/collections/all/products/machinist-vise-mini-pallet-fixture-plate
Mitee Bite products can be found here, no affiliation: miteebite.com/products/fixture-clamps
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Mike Manfrin
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Tim Bray
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Matthew Middleton
Thomas Veilleux
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
Hi Folks,
Part 2 of the Back Plate Inscriptions is good to go! A deep dive on all things #Saros and #eclipses - do please enjoy :)
Cheers,
Chris.
Clips Channel Glyph Video Quiz: youtu.be/w4qp45jPSVc
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Charles Frodsham & Co.
Peter John Richardson
Adam Slagle
Thomas Veilleux
Robin Haerens
L'Enfant Watch Company
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Kaedenn
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
RuKiddin06
________________________________________________________
References:
LUNAR ECLIPSES AND THE SAROS: eclipse.gsfc.nasa.gov/LEsaros/LEsaros.html
http://hist.science.online.fr/antikythera/DOCS/Bulletin%20SIS%20December%202005%20Counting.pdf - Counting Months and Years: The Upper Back Dial of the Antikythera Mechanism1 M.T. Wright 2005
jstor.org/stable/20191159 - "IG" XII, 1 913: An Astronomical Inscription from Hellenistic Rhodes - Alexander Jones 2006
sciamvs.org/files/SCIAMVS_07_003-041_Jones.pdf The Keskintos Astronomical Inscription Text and Interpretations - Alexander Jones 2006
nature.com/articles/nature07130 - Calendars with Olympiad display and eclipse
prediction on the Antikythera Mechanism - Freeth et al 2008
https://www.atnf.csiro.au/people/atzioumi/Antikythera2012/presentations/X-ray_Tomography-Ramsey.pdf X-ray Tomography of the Antikythera Mechanism - Andrew Ramsey 2012
link.springer.com/article/10.1007/s00407-014-0145-5 On the epoch of the Antikythera mechanism and its eclipse predictor - Carman & Evans 2014
journals.plos.org/plosone/article?id=10.1371/journal.pone.0103275 Eclipse Prediction on the Ancient Greek Astronomical Calculating Machine Known as the Antikythera Mechanism - Freeth 2014
journals.sagepub.com/doi/10.1177/0021828614537185 - The Antikythera Mechanism: the CONSTRUCTION of the METONIC POINTER and the back PLATE spirals - M. ANASTASIOU et al 2014
brepolsonline.net/doi/10.1484/J.ALMAGEST.5.110735 The Back Dial and Back Plate Inscriptions - Anastasiou et al 2016
brepolsonline.net/doi/10.1484/J.ALMAGEST.5.110736 - The Back Cover Inscription - Bitsakis/Jones 2016
http://www.jstor.org/stable/10.2972/hesperia.86.1.0129 The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars – Iversen 2017
doi.org/10.1057/s41599-018-0210-9 Revising the eclipse prediction scheme in the Antikythera mechanism - Freeth 2019
link.springer.com/article/10.1007%2Fs00407-019-00229-9 The Back Plate Inscription and eclipse scheme of the Antikythera Mechanism revisited - Iversen/Jones 2019
researchgate.net/publication/344329999_The_Antikythera_Mechanism_Rhodes_and_Epeiros "The Antikythera Mechanism, Rhodes, and Epeiros" - Iverson, P 2020
Lunisolar Calendar: en.wikipedia.org/wiki/Lunisolar_calendar
Intercalation: en.wikipedia.org/wiki/Intercalation_(timekeeping)
Intercalary Year: en.wikipedia.org/wiki/Leap_year
Metonic Cycle: en.wikipedia.org/wiki/Metonic_cycle
Callippic Cycle: en.wikipedia.org/wiki/Callippic_cycle
Variability of ancient Greek Calendars: en.wikipedia.org/wiki/Ancient_Greek_calendars
Plutarch, on the start of the lunar month: http://www.perseus.tufts.edu/hopper/text?doc=Perseus%3Atext%3A2008.01.0063%3Achapter%3D25%3Asection%3D3
Hour: en.wikipedia.org/wiki/Hour
A start on the deep dive into operation of the Straight-Line Engine, with a bit more detail on the tool from the previous video. Do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Thomas Veilleux
Robin Haerens
Charles Frodsham & Co.
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
Steve Hossner
________________________________________________________
#artdeco
This was a fun little build, and will be a useful add-on to the base machine. Do please enjoy!
Cheers,
Chris.
ps If you are short on time, be sure to subscribe to the clips channel for the videos presented in short clip format: youtube.com/clickspringclips
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Thomas Veilleux
Robin Haerens
Charles Frodsham & Co.
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
________________________________________________________
Hi Folks,
Pack your sandals for the #Hellenistic world, and be sure to bring the translator! We're off to learn about the Metonic calendar...
παρακαλώ απολαύστε!
Cheers,
Chris.
ps be sure to subscribe to the clips channel: youtube.com/clickspringclips
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Thomas Veilleux
Robin Haerens
Charles Frodsham & Co.
C. A. Patrick Voigt
Mark Coburn
Bogdan Dan
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Jim Popwell
Bradley Pirtle
Alan Carey
PaxAndromeda
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
Jonathan Teegarden
________________________________________________________
References:
http://hist.science.online.fr/antikythera/DOCS/Bulletin%20SIS%20December%202005%20Counting.pdf - Counting Months and Years: The Upper Back Dial of the Antikythera Mechanism1 M.T. Wright 2005
jstor.org/stable/20191159 - "IG" XII, 1 913: An Astronomical Inscription from Hellenistic Rhodes - Alexander Jones 2006
sciamvs.org/files/SCIAMVS_07_003-041_Jones.pdf The Keskintos Astronomical Inscription Text and Interpretations - Alexander Jones 2006
nature.com/articles/nature07130 - Calendars with Olympiad display and eclipse
prediction on the Antikythera Mechanism - Freeth et al 2008
https://www.atnf.csiro.au/people/atzioumi/Antikythera2012/presentations/X-ray_Tomography-Ramsey.pdf X-ray Tomography of the Antikythera Mechanism - Andrew Ramsey 2012
link.springer.com/article/10.1007/s00407-014-0145-5 On the epoch of the Antikythera mechanism and its eclipse predictor - Carman & Evans 2014
journals.plos.org/plosone/article?id=10.1371/journal.pone.0103275 Eclipse Prediction on the Ancient Greek Astronomical Calculating Machine Known as the Antikythera Mechanism - Freeth 2014
journals.sagepub.com/doi/10.1177/0021828614537185 - The Antikythera Mechanism: the CONSTRUCTION of the METONIC POINTER and the back PLATE spirals - M. ANASTASIOU et al 2014
brepolsonline.net/doi/10.1484/J.ALMAGEST.5.110735 The Back Dial and Back Plate Inscriptions - Anastasiou et al 2016
brepolsonline.net/doi/10.1484/J.ALMAGEST.5.110736 - The Back Cover Inscription - Bitsakis/Jones 2016
http://www.jstor.org/stable/10.2972/hesperia.86.1.0129 The Calendar on the Antikythera Mechanism and the Corinthian Family of Calendars – Iversen 2017
doi.org/10.1057/s41599-018-0210-9 Revising the eclipse prediction scheme in the Antikythera mechanism - Freeth 2019
link.springer.com/article/10.1007%2Fs00407-019-00229-9 The Back Plate Inscription and eclipse scheme of the Antikythera Mechanism revisited - Iversen/Jones 2019
researchgate.net/publication/344329999_The_Antikythera_Mechanism_Rhodes_and_Epeiros "The Antikythera Mechanism, Rhodes, and Epeiros" - Iverson, P 2020
Lunisolar Calendar: en.wikipedia.org/wiki/Lunisolar_calendar
Intercalation: en.wikipedia.org/wiki/Intercalation_(timekeeping)
Intercalary Year: en.wikipedia.org/wiki/Leap_year
Metonic Cycle: en.wikipedia.org/wiki/Metonic_cycle
Callippic Cycle: en.wikipedia.org/wiki/Callippic_cycle
Variability of ancient Greek Calendars: en.wikipedia.org/wiki/Ancient_Greek_calendars
Plutarch, on the start of the lunar month: http://www.perseus.tufts.edu/hopper/text?doc=Perseus%3Atext%3A2008.01.0063%3Achapter%3D25%3Asection%3D3
Here is an introduction video for the Rose Engine, a companion machine to the Straight Line Engine for generating Guilloché. Much like the recent SLE video I have put this video together without narration, as more of a chill out thing. The plate material is fine silver, the pattern is sometimes referred to as 'Escargot' and the pendant is an anniversary gift for my lovely wife. The enamel is from Milton Bridge, 263 Series K62 Jade. More detail on the casting & finishing of the pendant structure in a later video.
Do please enjoy!
Cheers,
Chris.
Also, be sure to check out this fantastic video of Jochen Benzinger (https://www.jochenbenzinger.de) describing and using both the Straight Line and Rose Engines to create a watch dial for Yvo Staudt: youtube.com/watch?v=SFfLWvwN1Bk - Come for the #Guilloche, stay for the accordion!
And, for an in depth #Guilloche masterclass on the Straight Line and Rose engines, be sure to check out the peerless series from Roger Smith:
youtube.com/watch?v=LBiiDpexmA8
youtube.com/watch?v=MS_G8Vm1gyQ
The Clickspring Clips channel can be found here: youtube.com/channel/UC9UjDtkpr2I-5G51vMJZvnA
Milton Bridge Enamels: milton-bridge.co.uk/products/jewellery-enamel
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Robin Haerens
Bogdan Dan
Niels Palmann
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Tim Bray
Jim Popwell
Bradley Pirtle
Thomas Veilleux
Alan Carey
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
C. A. Patrick Voigt
Mark Coburn
________________________________________________________
#artdeco #jewelry
There has been some interest in the Guilloché aspect of the next Patron Series project, so I thought I'd shoot a video to give you a good look at the Straight-Line Engine in action. No narration, just a chill-out sort of thing, and I will go through the process of using it in detail once I've completed the project prototypes I am working on at present. The plate material is fine silver, the pattern is a basketweave, and the component is the inner dial insert for the indicator project.
Do please enjoy!
Cheers,
Chris.
Also, be sure to check out this fantastic video of Jochen Benzinger (https://www.jochenbenzinger.de) describing and using both the Straight-Line and Rose Engines to create a watch dial for Yvo Staudt: youtube.com/watch?v=SFfLWvwN1Bk - Come for the #Guilloche, stay for the accordion!
And, for an in depth #Guilloché masterclass on the Straight-Line and Rose engines, be sure to check out the peerless series from Roger Smith:
youtube.com/watch?v=LBiiDpexmA8
youtube.com/watch?v=MS_G8Vm1gyQ
You can find the Clickspring Clips channel here: youtube.com/channel/UC9UjDtkpr2I-5G51vMJZvnA
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Bogdan Dan
Niels Palmann
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Tim Bray
Jim Popwell
Bradley Pirtle
Thomas Veilleux
Alan Carey
John A McCormick
Olof Haggren
Larry Pardi
Andre van Soest
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
C. A. Patrick Voigt
Mark Coburn
________________________________________________________
In this latest Fragments video I have a go at recreating some aspects of the #Ancient #Workshop that are indicated in the mechanism. Do please enjoy!
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Guy Loughridge
Peter John Richardson
Adam Slagle
Bogdan Dan
Niels Palmann
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Tim Bray
Jim Popwell
Bradley Pirtle
Thomas Veilleux
Alan Carey
John A McCormick
Thomas Eriksen
Michael Hardel
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
Grant Michener
C. A. Patrick Voigt
Mark Coburn
________________________________________________________
Research sources/References:
An Archaic metallurgical workshop in Thasos Greece the case of Charitopoulos plot - bit.ly/3mLpbsh
An experimental study of early bronze smithing techniques - bit.ly/3Dz2ttq
An experimental study of some early copper smithing techniques - bit.ly/3jssBxT
Examination of Greek bronze helmets : sampling and project design - bit.ly/3Dz2L3u
Experimental archaeometallurgy in perspective - bit.ly/38uNLoY
From Homer to Hoplite: Scientific Investigations of Greek Copper Alloy Helmets - bit.ly/3gMp5MY
Experimental simulation study of prehistoric bronze working: Testing the
effects of work-hardening on replicated alloys - bit.ly/38sEE83
Technical Examination of Greek Helmets - bit.ly/3ztjrXz
The Composition of the Copper Alloys used by the Greek, Etruscan and Roman Civilisations, Pt 2 - bit.ly/3ywPqoC
Towards an Appreciation of Minoan Metallurgical Techniques - bit.ly/3mO0ICx
Oikos and Oikonomia: Greek houses, households and the domestic economy - bit.ly/3yIkD8t
House and Society in the Ancient Greek World - bit.ly/3zxQji1
Water Management in Ancient Greek Cities - bit.ly/3ysSOAB
A Companion To Greek Architecture - bit.ly/3zxImcp
The Greek house and the ideology of citizenship - bit.ly/3kIANJM
A review of courtyard house: History evolution forms, and functions - bit.ly/3DyqJM7
Fire and smoke: hearths, braziers and chimneys in the Greek house - bit.ly/3t257CY
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
Without doubt, I have never felt more relaxed than watching this 27 minutes sail by.
Thank you for tuning in, have a very Merry Christmas, and a Happy New Year, and I'll catch you all in 2021.
Cheers,
Chris.
[Edit - watch this video Ad free here: vimeo.com/381269473/99c91eb996]
Build info: The build is a modernised interpretation of the original sundial-calendar artefact currently located in the London Science Museum sciencemuseum.org.uk . The original artefact is currently regarded as the second oldest geared mechanism on the historical record (after the Antikythera Mechanism), and is loosely dated to around 500AD.
As the name suggests, it's a combination portable sundial and lunar calendar mechanism. In addition to being a portable sundial, it computes the current age and phase of the moon, the position of the sun and moon in the zodiac, as well as the current date. I've extended the original design to include a Lunar Node display, according to the research of the engineering historian Michael Wright. This transforms the device from a simple calendar into a very effective eclipse prediction machine. It also makes it a great tool to help visualise the celestial mechanics behind an eclipse.
Original Device: collection.sciencemuseumgroup.org.uk/objects/co1082/byzantine-portable-universal-altitude-sundial-with-geared-calendrical-device-sundial-perpetual-calendar
Wright & Fields research: tandfonline.com/doi/abs/10.1080/00033798500200131
To view the full narrated build series and plans visit: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Guy Loughridge
Peter John Richardson
Adam Slagle
Niels Palmann
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Tim Bray
Jim Popwell
Bradley Pirtle
Bogdan Dan
Patrick Deuley
Maris Vecmanis
Thomas Veilleux
Mike Armour
Alan Carey
Felix Green
Rev. Steven Anderson
Paul Alix
John A McCormick
Olof Haggren
Larry Pardi
Tim Ball
Andre van Soest
Michael Hardel
Lee Wiggins
Peter
________________________________________________________
Hi Folks, you may be aware that there has been some research in the works for the last couple of years. I'm pleased to announce that it has now been published, do please enjoy: bhi.co.uk/antikytheramechanism
Cheers,
Chris.
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Guy Loughridge
Peter John Richardson
Adam Slagle
Bogdan Dan
Niels Palmann
Steven R. Crider
Gary Levario
Pete Askew
Jeff Armstrong
Rudolph Bescherer Jr
Robert Petz
Ralph McCoy
Tim Bray
Jim Popwell
Bradley Pirtle
Patrick Deuley
Maris Vecmanis
Thomas Veilleux
Mike Armour
Alan Carey
Felix Green
Rev. Steven Anderson
Paul Alix
John A McCormick
Olof Haggren
Larry Pardi
Andre van Soest
Thomas Eriksen
Michael Hardel
Lee Wiggins
Tim Ball
Dominik Rogala
Xanadu-King
Eric Witte
Peter
________________________________________________________
Hey Folks, you may be aware that I have been working on some research for the main Antikythera project over the last few months. So far so good on that front, although I may yet have to divert some more time back into it in the future, we'll see how it goes. For now I'm back on the video production, so please enjoy this collab with Chris Ramsay, and be sure to head on over to Chris's channel and say G'day -- youtu.be/ws99HWLzjlo
Btw, I have a new 2nd channel called "Clickspring Clips" for you to check out too: youtube.com/channel/UC9UjDtkpr2I-5G51vMJZvnA/.
The purpose of this 2nd channel is that I figure there are a lot of people on Youtube who don't yet know that they love machining who probably skip right past a 20 minute video. So this new channel is all short clips, to see if I can rope in those potential viewers. Its mostly old content presented in a much shorter format, so if you've been watching for a while you will already have seen most of the material. But if you have the time and interest, head on over and give it a sub and maybe share a few of the clips.
Cheers,
Chris.
Master Cardist & Magician Chris Ramsay can be found at: youtube.com/user/MrTricksforfun & http://www.chris-ramsay.com
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Peter John Richardson
Jeff Armstrong
Paul Alix
Rollin W. Patrick, Jr.
James Kuhn
Niels Palmann
David Wurmfeld
Steven R. Crider
John A McCormick
Lonnie Koehn
Michael Harmon
Gary Levario
Pete Askew
Andre van Soest
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Larry Pardi
Tim Bray
Thomas Veilleux
Bradley Pirtle
Jim Popwell
Maris Vecmanis
Ralph McCoy
________________________________________________________
-------------- Video Notes: ---------------
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Jewellers Bunsen Burner - amzn.to/2G6R09P
Dykem blue: http://amzn.to/2plmLlx
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Anytime Tools 5 Lathe Mill CENTER DRILL : amzn.to/2IThppO
Hegner Scroll Saw: amzn.to/2IhteVW
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit: amzn.to/2Pmegkq
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Gravermach AT: amzn.to/2mubLE5
Thermo-Lock: amzn.to/2nV8ttW
Glensteel Square Gravers: amzn.to/2miCrI8
Power Hone: amzn.to/2nXGmdD
Engravers Block Vise: amzn.to/2miCMdS
GRS - Satellite Turntable: amzn.to/2nZ3RmK
Consumables:
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Kaowool 24" X 12" X 1" 2400 F Ceramic Fiber Insulation: http://amzn.to/2pfsM3d
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Super Pike Saw Blades Size 3/0 pkg of 144: amzn.to/2uI0QdT
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Boric Acid Powder, 6 oz.: amzn.to/2PjfnkF
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
"Watchmaking" by Daniels: amzn.to/2V8ljSe
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
References:
Learn about the toner transfer method for transferring complex artwork, and many other terrific engraving tips from Master Engraver Layne Zuelke here: youtu.be/rcvS1C7jpxk
The Chris Ramsay Playing Card Press, by Clickspring.
In the tradition of "A Fistful of Tools" and "For a Few Tools More" comes "The Good, The Bad and The Oiler" - Please Enjoy!
The actual tool made in the video will be up for auction for the Make-A-Wish Foundation (http://www.makeawish.org.au). So if you reckon this one belongs on your bench, then be sure to put in a bid and help me raise some money for a terrific organisation. The auction can be found here: ebay.com/itm/264236625663
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Peter John Richardson
Jeff Armstrong
Paul Alix
Rollin W. Patrick, Jr.
James Kuhn
Niels Palmann
David Wurmfeld
Steven R. Crider
John A McCormick
Lonnie Koehn
Michael Harmon
Gary Levario
Pete Askew
Andre van Soest
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Larry Pardi
Tim Bray
________________________________________________________
-------------- Video Notes: ---------------
Ruby Jewel Cups:
BERGEON Product ID:
BERG-30180-AG-10MM
BERG-30180-AG-9MM
Can be purchased from http://www.ofrei.com/page248.html#30632
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Jewellers Bunsen Burner - amzn.to/2G6R09P
Dykem blue: http://amzn.to/2plmLlx
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Anytime Tools 5 Lathe Mill CENTER DRILL : amzn.to/2IThppO
Bernz-O-Matic ST2200T Micro Flame Butane Torch Kit: amzn.to/2Pmegkq
Blue Matador Abrasive Paper: amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Norton 547-61463624406 Gemini Mounted Point 1 x 1 in: amzn.to/2ExGNA6
Digital Caliper 6 inch/150 mm Electronic Vernier Calipers: amzn.to/2EArNRU
Jewellers Tools Pithwood: amzn.to/2IQrW9e
Moebius Multi-Purpose Lubricating High Grade Swiss Oil: amzn.to/2EC7zHk
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
"Watchmaking" by Daniels: http://amzn.to/2FH3cyh
"Wheel & Pinion Cutting in Horology": http://amzn.to/2HI6ca9
Top Flick:
The Good, The Bad, and the Ugly: amzn.to/2UmS7We
The Good The Bad and The Oiler, by Clickspring.
In this video I put forward a proposal for how the spirals on the rear dial of the mechanism may have been formed.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Peter John Richardson
James Kuhn
Niels Palmann
Steven R. Crider
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
________________________________________________________
-------------- Video Notes: ---------------
Related Videos:
Antikythera Fragment #3 - Ancient Tool Technology - Hand Cut Precision Files - youtu.be/SOw9WqMOHjA
Antikythera Fragment #4 - Ancient Tool Technology - The First Hardened Steel - youtu.be/V_Mp1fNzIT8
Antikythera Fragment #5 - The First Precision Drill Bit - youtu.be/N1aj_3tlQhU
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Jewellers Bunsen Burner - amzn.to/2G6R09P
Dykem blue: http://amzn.to/2plmLlx
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
References:
Metal Working in the Ancient World (Herbert Maryon) - jstor.org/stable/500498
Tools and Tool Marks. Gold and Bronze metallurgy in Western Europe During the Bronze and Early Iron Ages (Armbruster et al) - bit.ly/2GlBDtB
Scriber, Graver, Scorper, Tracer: notes on Experiments in Bronzeworking Technique (Lowery et al) - bit.ly/2MOIQDI
“The scholar, the mechanic and the Antikythera Mechanism”, M. T. Wright, Bulletin of the Scientific Instrument Society, lxxx (2003), 4–11.
“Calendars with Olympiad display and eclipse prediction on the Antikythera Mechanism” (Freeth et al), Nature, cdliv (2008), 614–17.
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
British Museum Hellenistic/Roman Bronze Mirror collection:
bit.ly/2BgNd5C
bit.ly/2GiJp7g
bit.ly/2S5vRTQ
bit.ly/2UDkbEu
Antikythera Fragment #9 - The Scorper And Trammel, by Clickspring.
Wine, wax, woad and yes, There Will Be Blood... all in an effort to discover the best ancient marking fluid. And I'll let you decide how the blood supply issue might have been dealt with in the ancient shop - I'm guessing it might not have been much fun being the apprentice on the day the large dial was marked out!
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Peter John Richardson
James Kuhn
Niels Palmann
Steven R. Crider
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
________________________________________________________
-------------- Video Notes: ---------------
References:
Traditional India Ink: youtube.com/watch?v=qza1Jz2g8FQ
Related Videos:
The Antikythera Mechanism Episode 4 - Making And Fitting B2 - youtu.be/ty-xxavBRcs
Amazon Affiliate links:
Cameras:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Dykem blue: http://amzn.to/2plmLlx
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Books:
Workshop practice Series: http://amzn.to/2DyPs2D
Machinery's handbook: http://amzn.to/2pi7XE5
Antikythera Fragment #8 - Layout Line Visibility, by Clickspring.
In this video I make what is arguably the most impressive section of the mechanism - the small pin-and-slot module that models the #Ancient #Greek theory of the variable motion of the #dearMoon.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
Steven R. Crider
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears From The Greeks", Derek de Solla Price: http://amzn.to/2pii4ZD
Sherline Lathe: http://amzn.to/2pnXM19
Sherline WW collets: http://amzn.to/2FYZ7F8
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Bergeon Professional Cleaning Rodico: amzn.to/2NwcM6y
Lodge Cast Iron: amazon.com/Lodge-Sportsmans-Hibachi-Style-Tailgaiting-Adjustable/dp/B00022OK2A
References:
The experimental bench block and forming tools used at 10:48 are conceptually based on some of the research in the papers mentioned in this papers bibliography: bit.ly/2GlBDtB
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Marcus Tullius Cicero: en.wikipedia.org/wiki/Cicero
Cicero De natura deorum:
en.wikipedia.org/wiki/De_Natura_Deorum
archive.org/details/denaturadeorumac00ciceuoft/page/206
Apsidal Precession:
en.wikipedia.org/wiki/Apsis
en.wikipedia.org/wiki/Apsidal_precession
Hipparchus: en.wikipedia.org/wiki/Hipparchus
Anomalistic Month:
en.wikipedia.org/wiki/Lunar_month#Anomalistic_month
Music:
taketones.com,
http://www.epidemicsound.com
The Antikythera Mechanism Episode 9 - Making The Epicyclic Pin and Slot Gearing, by Clickspring.
In this video I make the gearing that calculates the mean sidereal period of the #dearMoon, and have a closer look at some of the mechanical limitations of the device. Be sure to check out the related soldering video here: youtu.be/T_MdxdGr57k
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
Steven R. Crider
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears From The Greeks", Derek de Solla Price: http://amzn.to/2pii4ZD
Sherline Lathe: http://amzn.to/2pnXM19
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
The Antikythera Mechanism Episode 8 - Making The Mean Lunar Sidereal Train, by Clickspring.
Continuing on with the investigation of what it was like inside the #ancientworkshop here's a closer look at another of the demonstrated techniques: The precise joining of metal using #softsolder
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
Steven R. Crider
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Rosin: amzn.to/2wQ5jJ1
Tix Solder: http://amzn.to/2G4lUiE
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Lodge Cast Iron: amazon.com/Lodge-Sportsmans-Hibachi-Style-Tailgaiting-Adjustable/dp/B00022OK2A
References:
De Archetectura by Marcus Vitruvius Pollio:
http://www.perseus.tufts.edu/hopper/text?doc=Perseus%3Atext%3A1999.02.0073%3Abook%3D10%3Achapter%3D1%3Asection%3D6
Credits:
Clips from "The 2000 Year Old Computer" courtesy Images First Ltd.
Antikythera Fragment #7 - Precision Soft Soldering, by Clickspring.
In this video I make the gearing that drives the #eclipse prediction function of the mechanism. Be sure to check out the reference links below for more info on the Saros cycle, and other eclipse related stuff.
[EDIT: At 2:57 there is a typo - the final number in the denominator of the upper expression should be a 30 as per the sketch rather than 90 - Cheers :) ]
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
John A McCormick
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Andre van Soest
Larry Pardi
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jeremiah G. Mort
Olof Haggren
Tim Bray
Steven R. Crider
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears From The Greeks", Derek de Solla Price: http://amzn.to/2pii4ZD
Sherline Lathe: http://amzn.to/2pnXM19
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Hegner Scroll Saw: amzn.to/2IhteVW
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Abbreviated Transcript:
01:29 This leads to what's known as a Saros series, where over a period of well over a thousand years, roughly 70 to 80 eclipses, will follow one after the other in sequence, separated by the regular interval of 223 lunar months.
05:30 Now the exact nature of that technology is the big question, and we may never know for sure. But we can certainly try a few things out and see what might have been the case. So with that in mind, its time to open up a hole position that I marked back in episode 2. This is the pivot location of the E assembly, and its a perfect opportunity to make the very first hole in the mechanism using some of that ancient tool tech: The Pump Drill.
18:34 The main plate was then opened up, and the square bearing hole formed. These two positions are essentially absolute locations, governed by the dial artwork. And depthing could have been conducted from these positions before filing out this square hole. But at the risk of the position almost certainly moving as the square was formed, and so compromising the depth.
20:44 The height of the Saros pointer assembly is set by the height of the bearing in which it sits, and that height can be easily set by this little spacer. I originally made it slightly oversized, but its a straight forward job to set a clearance of just a few hundredths of a millimeter, by simply abrading the spacer until the barest daylight remains between the adjacent assemblies No special tools, or absolute measurement are required. Just keen eyesight, and a flat abrasive surface.
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Gear schematic can be found in Tony Freeth's 2012 research paper:
http://dlib.nyu.edu/awdl/isaw/isaw-papers/4/
Eclipse and Saros cycle info:
http://www.mreclipse.com/Special/LEprimer.html
http://www.mreclipse.com/Special/SEprimer.html
eclipse.gsfc.nasa.gov/SEsaros/SEsaroscat.html
eclipse.gsfc.nasa.gov/LEsaros/LEsaroscat.html
eclipsewise.com/solar/SEhelp/SEperiodicity.html
bit.ly/1CjqN0f
http://www.jstor.org/stable/pdf/1006543.pdf
en.wikipedia.org/wiki/Babylonian_astronomy
en.wikipedia.org/wiki/Sicilian_Expedition
en.wikipedia.org/wiki/Battle_of_the_Eclipse
theconversation.com/how-eclipses-were-regarded-as-omens-in-the-ancient-world-81248
http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0103275
Credits:
Clips from "The 2000 Year Old Computer" courtesy Images First Ltd.
Digital image of the Back Dial of The Antikythera mechanism courtesy Tony Freeth, Images First Ltd
Final track is "Fading" by Sappheiros - visit soundcloud.com/sappheirosmusic
Other music:
taketones.com,
http://www.epidemicsound.com
Aerial eclipse footage courtesy NASA
Eclipse Corona footage courtesy Joe Maddox
The Antikythera Mechanism Episode 7 - Making The Saros & Exeligmos Train, by Clickspring
This video was done as a one-off viewer request but I like the format so I'm going to keep it going as a request driven series - Let me know what you want to see covered in the comments below - Cheers :)
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
John A McCormick
Mike Manfrin
David Wurmfeld
Lonnie Koehn
Michael Harmon
Jim Popwell
Gary Levario
Rollin W. Patrick, Jr.
Pete Askew
Larry Pardi
Andre van Soest
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Adam Slagle
Jack Cause
Jeremiah G. Mort
Olof Haggren
Florian Ragwitz
Tim Bray
Steven R. Crider
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Hegner Scroll Saw: amzn.to/2IhteVW
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
Digital Calipers: amzn.to/2IkFh4O
Abbreviated Transcript:
00:42 I use Swiss made Grobet files for the vast majority of my filing and I find them to be excellent. So If you're looking to track some down, be sure to confirm that they are actually made in Switzerland before you buy, and keep an eye out for the bunny on the tang.
01:22 A safe edge like this effectively isolates the cutting to a single surface, and it forms a key part of my filing technique. Because when I'm filing something that needs to be precise, like for example a rectangle thats required to be dead on center. I like to have the basic target profile formed, very early in the filing process, before I use up too much of the available metal.
02:49 Next I identify the critical corners of the workpiece. These are the locations that must be well positioned for the part to be acceptable. And then I start the cut working directly towards those corners, with the objective of establishing the overall shape whilst using up as little of the metal margin as possible.
03:32 And its not unusual for this last part of the process to take up most of the time. Because there's often only a handful of file strokes between a tight and a perfect fit. The very last thing I want to do is take it too far, and remove too much metal. Now this idea can be applied to just about any profile, whether it be internal or external.
04:07 If I get the corners correctly established early, then the orientation can be locked in. And the whole shape can be slowly worked toward the final profile. Now of course that's the ideal, but it rarely goes according to the plan, which leads to tip Number 4. 05:36 Now there is an even more immediate technique that can be used to pick up errors, as they occur. Just prior to each cut, a light cross grain pattern can be made on the surface of the work, and then a light can be positioned to make that pattern more visible.
06:14 Because it means that rather than reacting after completing a surface, I can take a much more proactive approach while the cut is in progress. And it makes creating a taper or dealing with a localised error easier too. Just mark the region where more metal needs to be removed, and then concentrate the work there.
06:59 And although the effect is quite subtle, the shop itself has a few reference edges too, that can also help the process. Aligning the work with the vise, and then the vise with the bench means that all of these edges that are sitting in my peripheral vision as I work, and can now also give me cues for better alignment of the file.
07:38 And the fact that its held with both hands means that there's a good controlled grip to keep it that way. So the technique is perfect for delivering a very precise surface. Its also an excellent technique help generate on 2 or more parts at the same time.
08:47 And the same idea can be expanded to generate more complex shapes using guides, like for example the crossings on this wheel. The shape near the center of the wheel needs to be exactly the same for each opening, and a filing guide makes this much easier to achieve.
References:
"Watchmaking" by Daniels: http://amzn.to/2FH3cyh
"Workshop practice Series": http://amzn.to/2DyPs2D
The Nicholson Guide to Files & Filing: http://www.nicholsontool.com/MagentoShare/media/documents/nicholson-guide-to-filing-2014.pdf
8 Old School Tips For Better Hand Filing, by Clickspring
The precision of the holes in the Antikythera mechanism is one of the most fascinating aspects of its construction. In this video I make a tool that is capable of creating holes to the required standard, yet is consistent with the level of technology known to have existed in the period.
The video where I show the drill bit making process in detail can be found here: youtu.be/N1aj_3tlQhU
The plans for this project, and a IGES file of the flywheel casting pattern can be downloaded as a zip file here (11mb): http://www.clickspringprojects.com/uploads/3/8/2/2/38221101/clickspring_pump_drill.zip
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Steven Sladewski
Rollin W. Patrick, Jr.
Jim Popwell
Gary Levario
Pete Askew
Norman Lemke
Andre van Soest
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Sam Towne
Adam Slagle
Jack Cause
Jeremiah G. Mort
Dave Seff
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Michael Harmon
Lonnie Koehn
Tim Bray
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Casting Practice – The Ten Rules of Castings" – http://amzn.to/2HF3VfL
"The Backyard Foundry (Workshop Practice Series)" - amzn.to/2KdfTip
Calcium Carbonate, 1 pound Capacity: http://amzn.to/2FXGrpb
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Hegner Scroll Saw: amzn.to/2IhteVW
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
Abbreviated Transcript:
02:30 In fact the Roman author and engineer Vitruvius, writing at around the time that the mechanism was lost mentions lathes in a completely offhand manner, expecting the reader to be thoroughly familiar with the idea. As if the technology was so commonplace, that it barely required explaining. As it happens, the Antikythera Mechanism may in fact be the very best evidence available to establish the full extent of that lathe technology, at least as it relates to smaller scale engineering.
08:37 Next up are what I'm calling the collets, The parts of the tool that'll hold the various drill bits. I cast some long round stock from the same bronze as the flywheel, and then turned it down to an appropriate starting diameter. I then formed the basic collet profile.
11:15 And the same applies to these holes. They're not difficult to form, nor do they need to be terribly precise. They could be made using the lathe tech of the day, or even by using much cruder methods like gouging and then filing. To complete the part, I gave it a light sand, followed by a linseed oil finish.
16:12 In any event, once created, the drill bits themselves can then be used to drill out the collets. Each of the 3 test bits correspond to a critical feature found within the mechanism. One is for a standard bearing hole, one for a standard retaining pin, and the smallest, coming in at just 0.8 of a millimeter, corresponds with the holes used to locate the calendar ring.
16:39 Now there is evidence of the use of soft solder within the mechanism wreckage, and certainly soft solder would be suitable to hold the bits in their collets. But equally plausible, and I think a little more convenient, is resin. I'm using shellac, but any hard resin available at the time would have worked well.
19:58 The changeout of drill bits and flywheels is fast and easy, and the drilling time is comparable to a modern drill. Now as to whether or not this type of tool was used to build the mechanism, well who knows. But I do think its fair to say that its a contender. These test pieces compare well with the holes found throughout the wreckage of the mechanism.
References:
Marcus Vitruvius Pollio: en.wikipedia.org/wiki/Vitruvius
De Archetectura by Marcus Vitruvius Pollio:
http://www.perseus.tufts.edu/hopper/text?doc=Perseus%3Atext%3A1999.02.0073%3Abook%3D10%3Achapter%3D1%3Asection%3D6
TheOlfoundryman on YT: youtube.com/channel/UC90RoN_IjSRF18jAG0HIA6g
Antikythera Fragment #6 - Making A Hand Powered Drill
There are a number of cutting tools implied in the wreckage of the Antikythera Mechanism, and one of the most interesting is the drill bit. In this video I explore a possible method of how an effective and precise drill bit could have been made in antiquity.
The video where I show the carburisation process in detail can be found here: youtu.be/V_Mp1fNzIT8
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Steven Sladewski
Rollin W. Patrick, Jr.
Jim Popwell
Gary Levario
Pete Askew
Norman Lemke
Andre van Soest
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Sam Towne
Adam Slagle
Jack Cause
Jeremiah G. Mort
Dave Seff
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Michael Harmon
Lonnie Koehn
Tim Bray
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Hardening, Tempering and Heat Treatment (Workshop Practice Series)" - amzn.to/2KbZo6l
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red: http://amzn.to/2tTEPb0
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Abbreviated Transcript:
00:12 The existence of an Ancient style of drill bit is strongly implied in the wreckage of the Antikythera Mechanism. And its fabrication would have likely hinged on a crucial process: The ability to take a malleable wrought iron, and transform it into something hard enough to cut bronze.
00:28 I've covered the process in detail in a separate video, but essentially it involves packing an animal based charcoal and salt around the soft iron, sealing it in clay, and then heating it up to a red heat I'm using a low carbon mild steel as a substitute for Ancient wrought iron. Its soft and ductile.
01:00 But there are some great examples of long slender turning to be found within the wreckage of the mechanism itself. There's a shaft that extended from the lunar phase gearing up to the phase display on the front dial that's roughly 4mm in diameter.
01:16 And there are numerous other pins and shafts, some less than a mm in diameter. I'm using a modern furnace for convenience, but a traditional charcoal furnace is quite capable of generating the required temperature. Once at a red heat, the process of carburising the iron is purely a time exercise.
01:51 So I reheated the rods, rolled them straight on a flat surface, and then requenched. The once soft metal is now very hard, but also extremely brittle, and so easily fractures under a light bending load. So to be of use as a cutting tool, it needs to be tempered, in this case to a light straw color.
02:40 I can see this end of the rod is a good straight section, so that'll become the actual bit, and the excess will be removed at the end of the process. A gentle heat raises the temperature of the rod until a pale straw color just reaches what will become the cutting end. The material is now in a tempered state. Still very hard, but tough rather than brittle.
03:23 Despite no longer being widely used, it still has a number of attributes to recommend it. The first being that its very easy to make. Because the primary surfaces can all be formed by hand, on flat abrasive stones. The cutting edges can be shaped for unidirectional cutting, or as in the case that I'm showing onscreen, for single direction cutting.
03:59 And once the operational length has been decided, it can be permanently set by scoring the metal with a file, and then snapping off the excess material.
04:38 In its rigid cross section form, this sort of drill bit will often perform much like a traditional D bit. Delivering a very straight deep hole. Now there is of course an obvious drawback to the drill bit design: The need to repeatedly withdraw it from the work to clear the chips.
05:36 As soon as the cutting edges start to dull, a quick hit on the stones will bring them back to original condition. Now you won't want to throw out your twist drills any time soon, but its a great option to keep in mind for those rare occasions when you really do need a custom drill bit.
References:
Watchmaking by Daniels: http://amzn.to/2FH3cyh
The many books and DVD's by WR (Bill) Smith: wrsmithclocks.com/dvd
Antikythera Fragment #5 - The First Precision Drill Bit, by Clickspring.
In this video I make the gearing that drives the Metonic, Callippic and Olympiad pointers. If you're interested in a bit more detail on the ancient Greek approach to calendars, then I recommend this excellent article on the Athenian calendars - https://www.ancient.eu/article/833/the-athenian-calendar/
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Steven Sladewski
Rollin W. Patrick, Jr.
Jim Popwell
Gary Levario
Pete Askew
Norman Lemke
Andre van Soest
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Sam Towne
Adam Slagle
Jack Cause
Jeremiah G. Mort
Dave Seff
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"A Portable Cosmos: Revealing the Antikythera Mechanism, Scientific Wonder of the Ancient World" amzn.to/2NoLgIR
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
Abbreviated Transcript:
01:16 So ignoring sign convention for the moment, and viewed from the perspective of the pointers, the gearing ensures that a full turn of th Metonic pointer occurs once every 3.8 years. And you might notice that two of the gears cancel out in the train calculation, so they appears to be redundant. But as it happens a 53 tooth gear turns out to be essential for another part of the mechanism thats driven by the first section of this train, and I'll cover that in detail in a later video Now there's a small error in the Metonic cycle thats corrected in the Callipic cycle, by essentially multiplying the entire Metonic cycle by 4 to give a more accurate 76 year relationship. And finally the Olympiad pointer indicates the passage of the 4 year Games cycle. So there are 6 wheel assemblies to be made to complete this part of the mechanism, as well as a number of supporting components.
02:54 Some were evolutionary dead ends, and simply didn't make it. Some, like the single pivot idea were the origins of an idea that continued to evolve. And others were evolutionary winners from the very beginning. Travelling through time essentially unchanged, right up to the modern era. Now one idea that of course definitely evolved is the tooth profile. But that's not to say it wasn't largely effective as it was. Because despite its mechanical inefficiency, a triangular tooth profile brings a tremendous advantage when it comes to certain aspects of the build. Like for example, depthing.
04:39 In that instance the entire outside profile of one or even both of the wheels can be very slightly filed back, much like when the teeth were originally formed. So that the final stage of depthing essentially becomes an extension of the tooth forming process.
12:42 so next I moved on to the pointer components, starting with the support frame for the metonic pointer. And since I'll soon need a second one of these for the Saros pointer, I figured I'd better make both of them at the same time.
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Gear schematic can be found in Tony Freeth's 2012 research paper:
http://dlib.nyu.edu/awdl/isaw/isaw-papers/4/
The Athenian Calendar - https://www.ancient.eu/article/833/the-athenian-calendar/
The Callippic Cycle: en.wikipedia.org/wiki/Callippic_cycle
Meton Of Athens/Metonic Cycle: en.wikipedia.org/wiki/Meton_of_Athens
MT Wright (2005) Counting Months and years: The Upper Back Dial of The Antikythera Mechanism
Credits:
Clips from "The 2000 Year Old Computer" courtesy Images First Ltd.
Digital image of the Back Dial of The Antikythera mechanism courtesy Tony Freeth, Images First Ltd
The Antikythera Mechanism Episode 6 - Making The Metonic Calendar Train, by Clickspring
In this video I make the small assembly that enables the user to drive the mechanism.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Sam Towne
Adam Slagle
Jack Cause
Jeremiah G. Mort
Dave Seff
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
Andre van Soest
Pete Askew
Norman Lemke
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears From The Greeks", Derek de Solla Price: http://amzn.to/2pii4ZD
"A Portable Cosmos: Revealing the Antikythera Mechanism, Scientific Wonder of the Ancient World" amzn.to/2NoLgIR
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Hegner Scroll Saw: amzn.to/2IhteVW
Kaowool 24" X 12" X 1" 2400 F Ceramic Fiber Insulation: http://amzn.to/2pfsM3d
Tix Flux 1/2oz: http://amzn.to/2G85OEZ
Tix Solder: http://amzn.to/2G4lUiE
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Generic Dial Indicator 0.001": http://amzn.to/2FOFTyF
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Abbreviated Transcript:
0:00:56 Now much like the main solar drive wheel, from our modern perspective, this is clearly not the easiest way to construct the part. So again the question naturally arises, why did The Maker choose this more difficult method?
03:08 Taking care to reheat the work as soon as it started to cool down, and also being careful to not to overheat it. It doesn't take much to melt a small piece of brass like this. A light skim cut on the lathe created a uniform surface, and widened the inside diameter to be a close fit with the central cylinder formed earlier. A touch of soft solder bonds the two parts together, and fills the join in the perimeter of the band.
06:57 Gradual increases in the depth of cut on either side of a single tooth, eventually leave a small triangular land at the tooth apex. At which point the carriage can be locked, and all of the teeth cut at the same setting. I took a light skim cut of the perimeter to remove the small exit burr left by the fly cutter, and then marked out the rectangular hole that will receive the driving arbor.
09:49 I've found that around 0.4 of a millimeter gives a good tight radius to the bend, and allows the metal to bend easily without cracking. The inside corner on the indexing arm, that I made in a previous video, serves as a convenient square reference.
12:27 The wheel assembly could be held up to B1 with a toolmakers clamp, depthed, marked and then permanently fixed in place. But I'd also like to have the back surface of the bracket flush with the side of the main plate, without having to trim that plate after the fact. So that meant making my best guess at the correct depthing at the planning stage, and essentially locking it in at the start of the project.
13:18 With the input assembly position located, the bracket and underlying main plate were drilled out to accept a pair of steady pins. The steady pins now ensure the the accuracy and repeatability of the bracket position. And once clamped firmly, I drilled out the hole for the bracket retaining pin. A quick tidy up of the holes, and that's the bracket complete for now.
16:44 I opened up the matching rectangle marked out in the center of the crown wheel, taking care to ensure a close fit. With the crown wheel assembled on its driving arbor, I marked the retaining pin position, which will ensure a small clamping force from the taper pin once its inserted.
19:05 The friction is quite low, with both wheels showing free and smooth movement. And the gear interaction feels good too, much better than I expected from a triangular tooth form. In fact based on the feel alone, there's not much to give away the fact that its not a modern tooth profile.
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Gear schematic can be found in Tony Freeth's 2012 research paper:
http://dlib.nyu.edu/awdl/isaw/isaw-papers/4/
The Antikythera Mechanism Episode 5 - The Input Crown Wheel Assembly
In this video the most recognizable component of the mechanism continues to take shape, and becomes the first moving part within the plates.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Sam Towne
Adam Slagle
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Dave Seff
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
Sean Kuyper
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"A Portable Cosmos: Revealing the Antikythera Mechanism, Scientific Wonder of the Ancient World" amzn.to/2NoLgIR
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Hegner Scroll Saw: amzn.to/2IhteVW
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Abbreviated Transcript:
01:19 Now before I do any more with this wheel, I'd like to show you a bit more detail on where it fits into the mechanism. Its permanently fastened to the main Solar Drive Wheel B1, and its part of the gearing associated with the back half of the device. In fact its the first wheel in that large and quite complex part of the mechanism.
01:37 It engages 2 wheels, that in turn drive the gearing that animates the eclipse prediction display, the calendar display and the lunar phase display. Now that's a lot gears, generating a lot friction. So the load on B2 and its rivets is considerable.
02:04 And secondly, the scans show 4 quite substantial rivets placed in a symmetrical pattern around the spokes, that hold B2 firmly in place. Its a very neat solution that wouldn't be out of place in a modern clock mechanism. Now the central bore of B2 needs to be opened up to match the main bearing and it could be simply drilled out on a drill press.
02:51 And you'll notice that I haven't used any marking fluid to make that circle more visible. I've done this to show just how hard it can be to see even a simple object line on bare metal. Even up close I think you'll agree it's not exactly the clearest line you could hope for.
03:49 One to locate parts on the division plate, and one to bring all 3 components into alignment for drilling out the rivet hole positions. Now it certainly doesn't meet the requirement of robust handling, but a very straight forward marking material worth investigating is candle soot.
05:02 The positions for the 4 holes are now firmly located over the centerline of each of the spokes, and can now be drilled out in preparation for accepting the rivets. And as tempting as it is to just drop in all 4 holes at once, even the slightest movement of the work whilst drilling can lead to an unacceptable misalignment of the holes.
05:44 The 4 rivets were turned to size, and left just long enough to allow them to be comfortably held for insertion. By now of course a lot of the soot has worn off, so I think its clear that it really wouldn't be suitable for marking out anything that needs a lot of handling, like for example the wheels.
06:57 And then started the process of permanently setting them in place. I made sure that each rivet end was thoroughly peened, and that the metal was pushed well out into the chamfer, giving not just a seamless join, but also good solid mechanical strength. And for the final step, I used a file and 800 grit abrasive paper to blend the rivets into the surrounding metal.
08:23 And as I reach the end of this video, its hard to escape the thought that over 2000 years ago, there was moment, just like this.
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Gear schematic can be found in Tony Freeth's 2012 research paper:
http://dlib.nyu.edu/awdl/isaw/isaw-papers/4/
Credits:
Clips from "The 2000 Year Old Computer" courtesy Images First Ltd.
Digital image of the Back Dial of The Antikythera mechanism courtesy Tony Freeth, Images First Ltd
The Antikythera Mechanism Episode 4 - Making And Fitting B2
Here is the prototype that I made back in 2015:
youtu.be/UvCB3_KtSz0
youtu.be/oF-KcvZjW3E
What is a Fire Piston and how does it work? 2:42
How do I use The Clickspring Fire Piston? 3:15
What type of Tinder is Recommended for The Clickspring Fire Piston? 4:55
How do I make Char Cloth? 5:21
How do I use the Storage Compartment? 6:45
What weather conditions particularly suit the Clickspring Fire Piston? 8:05
How do I clean and Lubricate The Clickspring Fire Piston? 9:07
What are the Components and Specifications of The Clickspring Fire Piston? 10:18
Abbreviated Transcript:
00:17 The Clickspring Fire Piston is a high quality fire starting device perfect for the task, and its been specifically designed with campers, preppers and outdoor enthusiasts in mind. Using an ignition technique completely different to most fire starting methods, its particularly suited to starting a fire in high wind conditions, and so is a perfect component of any survival, camping or hiking bag.
00:42 Now aside from its practical use, its also a fun gadget to play with, and it makes a terrific gift for friends and family, especially those who love a device that requires a little bit of skill to use. Precision machined to exacting tolerances, this device has been built to last. The cylinder is formed from a single piece of aluminium, and has been anodized for both durability and performance.
01:29 So that you can immediately start using it, there are 2 packets of char cloth tinder included in your purchase. And Instructions on how to make more char cloth, are provided later in this video. Now there are of course many other methods for starting a fire. But few, if any, of those methods are as interesting, or as much fun to use as this little device.
02:56 Using the principle of Adiabatic Heating much like the modern diesel engine, the rapid compression of air within the cylinder as the user closes the piston, leads to a corresponding rapid rise in temperature.
03:20 To get started using the Clickspring Fire Piston tear off a small piece of char cloth, gently Push that ball into the cone shape at the end of the brass piston. Once the char cloth is in place, Insert the piston back into the cylinder, with the end of the piston just inside the bore, to ensure that the piston will have a full stroke. Now there are 2 methods to get ignition.
04:05 The main thing you're aiming for is speed of closure. You really do need to close the piston very fast. And it also heps if you can briefly hold the piston at the position of maximum pressure.
05:04 It ignites readily, and in normal conditions burns slowly. However if you provide it with additional airflow by blowing on it, or by placing it in a strong wind, it'll easily ignite surrounding material into open flame, making it the perfect tinder for starting a camp fire.
06:05 That flame soon decreases, until there's just a single small flame extending from the hole. Once this flame extinguishes, the formation of the char cloth is complete, and you can leave the tin to cool down. When the tin has cooled, remove the piece of char cloth to examine it. It should be flexible, and still show the woven pattern of the original cotton fabric.
07:05 Unscrew the Piston Handle, and confirm that the foil wrap will slide loosely in and out of the compartment. When you're satisfied that it'll drop out when required, seal off the cap, and then reinsert the piston back into the cylinder. Your fire piston is now good to go for your next outdoor adventure.
08:10 The Clickspring Fire Piston will function in most of the same weather conditions as the other common fire starting methods. But there is one circumstance where it stand out well ahead of the rest. And that's in strong wind conditions.
09:12 Your Fire Piston will arrive to you clean and lubricated, and ready for immediate use. However its quite normal after continued use, for char cloth residue to begin to build up within the cylinder bore, To clean away this residue, begin by dis-assembling the unit.
09:54 Re-assemble the unit, and then place a single drop of light oil on the piston. Work it up and down a few times, and then close off the end cap. Be sure to tighten the end cap firmly to create a good seal. You should feel the device immediately return to a smooth action, and your Fire Piston is now ready again for use.
Warning - Keep away from children, do not use indoors. Do not use to light cigarettes, cigars or pipes. Keep away from face and clothing. Be sure ember or flame is completely extinguished after each use. Do not use near flammable materials. Piston may be hot after use.
Follow all instructions and warnings provided by manufacturer of appliances and any other items when using this product.
No lighter is childproof, there is no substitute for proper adult supervision.
User uses this device at their own risk.
One of the key tool technologies that needs to be explored around the Antikythera mechanism is the simple hand held file. So this is the second of 2 Fragment videos relating to the making and hardening of a set of custom files, using materials and processes consistent with the period. Thanks for watching!
The first video where I make the files can be found here: youtu.be/SOw9WqMOHjA
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Sam Towne
Adam Slagle
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Dave Seff
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
Sean Kuyper
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Foundrywork for the Amateur (Workshop Practice)" - amzn.to/2Kd1iUb
"The Backyard Foundry (Workshop Practice Series)" - amzn.to/2KdfTip
"Hardening, Tempering and Heat Treatment (Workshop Practice Series)" - amzn.to/2KbZo6l
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Kaowool 24" X 12" X 1" 2400 F Ceramic Fiber Insulation: http://amzn.to/2pfsM3d
Abbreviated Transcript:
00:09 As part of the process of investigating how the Antikythera Mechanism was made, I've made a set of hand cut files, using mild steel as a substitute for the wrought iron that was likely used in antiquity. But of course when it comes to hardening those cutting surfaces, there's a problem. And its the same problem as that faced by the original maker more than 2000 years ago. Mild steel, has insufficient carbon to simply heat and then quench harden.
00:37 So in this video I'm going to use the ancient process of case hardening to harden the file surfaces. It involves heating the work in close proximity to a carbon source, to absorb carbon into the surface prior to quenching.
01:54 The charcoal was then ground into a fine powder, in preparation for making the carbon pack. I mixed the carbon powder with salt and flour in the proportions onscreen, and then turned into a paste with a small amount of water. The paste was then packed ar ound the file surfaces, and then left to thoroughly dry. Now a reasonable degree of case hardening can be achieved by simply heating this carbon pack, as-is.
02:59 But to optimise the chemical reaction, the process is best conducted in an airtight environment. And traditionally, this was achieved by enclosing the carbon pack in clay. Again for convenience, I'm using a modern propane furnace to do the heating, but a charcoal furnace from the period would have been quite capable of raising the clay to a red heat. And its at this red heat temperature that the transformation begins
03:44 The metal is now in what's known as the Austenite phase, and has a strong affinity for more carbon. At the same time, the carbon pack is reacting at the steel surface generating a surplus of carbon that diffuses into the body of the steel. Effectively carburising the metal from the outside in. The depth of this carburisation is dependent on time.
04:05 The longer that I leave it in this heat, the deeper the resulting layer of high carbon steel. So while that's cooking, I'd like to show you the tests that I did earlier to figure out just how long the steel
needs to remain in the heat. I started with the same mild steel stock as the files, using a control piece and 4 carbon packed pieces. All were enclosed in clay, heated to a red heat, and then quenched in room temperature brine.
05:06 The Austenite has been transformed into a hard crystalline microstructure known as Martensite. That appears as a silver-white ring around the darker low carbon interior. And you can clearly see it progressing towards the centre of the metal, as a function of time. The longer the material spends in the heat, the
deeper the layer of martensite. Now a cutting tool like a file doesn't really need the hard layer to be particularly deep.
07:13 Today, modern steel composition means that there are several ways to form tempered martensite, in addition to the process that I've shown in this video. And we use it in much of our day to day life, mostly without even being aware of it. But in the ancient world, before it even had a name, this is one of the ways
that it was formed. Using a simple process, and the simplest of ingredients.
Antikythera Fragment #4 - Ancient Tool Technology - The First Hardened Steel
There are quite a few very interesting tools still to come in this Fragment series, but I have to admit I've been super excited about these: A set of hand cut files suitable for constructing the #Antikythera Mechanism. Please enjoy :)
The other video where I case harden the files can be found here: youtu.be/V_Mp1fNzIT8
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Sam Towne
Adam Slagle
Jack Cause
Daniel Taraldsen
Jeremiah G. Mort
Dave Seff
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
Sean Kuyper
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Foundrywork for the Amateur (Workshop Practice)" - amzn.to/2Kd1iUb
"The Backyard Foundry (Workshop Practice Series)" - amzn.to/2KdfTip
"Hardening, Tempering and Heat Treatment (Workshop Practice Series)" - amzn.to/2KbZo6l
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible: http://amzn.to/2pkVAak
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Abbreviated Transcript:
00:40 The Greek civilisation was well into the Iron Age at the time of the devices creation. But the question of steel availability is not easily answered. Certainly there was a form of crucible steel known as Wootz, from the region we now call India. But there was also the technique known as case hardening, which essentially converts the surface of an iron object into steel.
01:23 The first step is to take this raw stock, and shape the basic file blanks. In recent history, this job was done on a massive grinding wheel. And although it would of course have been much slower and less convenient, similar hand powered abrasive tools are known to have existed in antiquity.
02:46 No matter how much I roll the file on top of the work, it rotates so that the file will still cut reasonably flat. Ok, so with the file surfaces stripped, the next step is to form the teeth. And I need to make a few more custom tools to get this part of the job done. I've made a simple file cutting workstation, based on the traditional approach, but scaled down to suit the size of my shop.
06:15 And that first tooth now becomes the reference for the next tooth. The chisel blade is slid up against it, and then the subsequent teeth are laid down one after another. Each time, using the previous cut to locate the next.
08:59 Well I'm not about to give up my commercially made files any time soon. But they do work quite well. They're probably equivalent to a modern #2 cut file, and although the cutting action is not quite as sweet as a new, modern file, its a reasonable balance between metal removal and surface finish. They're durable, easy to handle, and certainly perform well enough to have constructed the original mechanism.
10:31 But there's still quite a high degree of consistency of the root angles around each given wheel. That suggests to me that the teeth were in fact formed by simply plunging the file into the workpiece, like I've done here. And that the root angle variation observed across the gearing, was in fact generated by a small selection of files cut specifically to construct this mechanism. Ok, so to wrap this one up, Its still very early days for this reconstruction. And I've still got a lot more research to do into the tool technology behind this machine.
References:
The Nicholson Guide to Files & Filing: http://www.nicholsontool.com/MagentoShare/media/documents/nicholson-guide-to-filing-2014.pdf
The late Ken Hawley on the Sheffield file cutting tradition: youtube.com/watch?v=FB58hkncznI
A modern French toolmaking company, producing magnificent hand cut files and rasps: youtube.com/watch?v=gvr2nZeAfNc
Another beautiful video on rasp making: youtu.be/gQ09O3d8y9Q?t=3m22s
A look at traditional filecutting. A blend of both the modern filecutting machine as well as traditional hand cut files (German, no English CC's): youtu.be/koZkKDAg3Zs?t=18m10s
Antikythera Fragment #3 - Ancient Tool Technology - Hand Cut Precision Files
One thing about this machine that is truly surprising, is just how small the teeth are.
There's a well established theory as to how the tooth divisions were marked out, but employing that process to mark out multiple wheels has forced me to question whether it can reasonably be applied to the Antikythera Mechanism.
So in this video I propose an alternative process of wheel division, using only the non precision tools of the period.
More detail on the specifics of 223 teeth on B1 below...
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Sam Towne
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Dave Seff
Matteo Neville
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Samuel Irons
Tim Bray
Sean Kuyper
________________________________________________________
Want to know more about Ancient Greece? Then be sure to check out the Ancient Greece Declassified podcast: http://www.greecepodcast.com
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Optivisor Headband Magnifier: http://amzn.to/2HFg1FU
Hegner Scroll Saw: amzn.to/2IhteVW
Super Pike Saw Blades Size 4/0 pkg of 144: http://amzn.to/2IO6aPw
________________________________________________________
The proposition regarding why B1 has 223 teeth in detail:
The teeth of the main drive wheel B1 are accepted to sit outside the calculating train, and so serve the purpose of simply permitting convenient movement of that wheel, via the input crown wheel A1. In that sense any practical tooth number would have sufficed, and by practical I mean any tooth count that would provide a mechanically sound, robust tooth size.
B1 has an approximate outside diameter of 132mm.
200 teeth gives a tooth module of approximately 0.66 - a very chunky and robust tooth, with apex tip to tip of 2.1mm. A very strong tooth, able to withstand the input torque very well. Although it must be said approaching the point of being too coarse from the perspective of fine mechanism control.
280 teeth gives a module of approximately 0.47 - a reasonably delicate tooth form, 1.49mm between tooth tips, but consistent with almost all other wheels found in the device, and so still a reasonable candidate. Perfect for very fine control of the mechanism, but perhaps approaching the size where deformation of the tooth could occur with exuberant input torque from the user.
So assuming no change to the outside diameter of the wheel, any tooth count (and therefore module) in between this range of 200 to 280 would provide a tooth form that is suitable to perform the role of robustly generating movement of B1.
Latest research has the actual number of teeth for B1 at either 223 or 224. However it is highly likely that the number is in fact 223.
If this is the case, then the choice of 223 is remarkable.
Because if we consider all options within the range of approximately 200 to 280 teeth as valid candidates, then there had to be a very good reason to choose that more difficult division candidate over the more obvious options immediately adjacent. ie Why not select 224? 222? 240? etc
My proposition is that 223 was selected out of simple manufacturing convenience. And that the choice strongly indicates the existence of an ancient division method very different to the current theory. ie One that leverages existing counts to propagate them to multiple wheels.
E3 is known with to have 223 teeth to perform its eclipse prediction role on the Saros dial, so that division number was already required to be present on the division tool.
Knowing that any robust tooth would suffice for B1, The Maker would have been able to directly observe that the count of 223, fits nicely into the range of convenient and robust tooth sizes for the role to be performed by B1. It would have been clear that there was no need to perform yet another large division, when a suitable candidate was already present on the tool.
And so the otherwise surprising tooth count of 223 was selected for B1.
Antikythera Fragment #2 - Ancient Tool Technology - The Original Dividing Plate?
In this episode the basic structure of the mechanism comes together, and I put forward a theory on a simple method for achieving the extremely close clearances observed in the original device.
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page: patreon.com/clickspring
________________________________________________________
A very special thank you to Patrons:
Tim Bray
Sinking Valley Woodworks (http://www.sinkingvalleywoodworks.com)
Mike Manfrin
Christopher Warnock
Glenn Trewitt
Dan Keen
Samuel Irons
Sean Kuyper
Matteo Neville
Daniel Cohen
Larry Pardi
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Matthew Middleton
Dave Seff
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 - amzn.to/2rEzhh2
Panasonic X920 - amzn.to/2wzxxdT
Tools & Shop Products:
"Solidworks 2013 Bible": http://amzn.to/2FObS1D
"Gears From The Greeks", Derek de Solla Price: http://amzn.to/2pii4ZD
"A Portable Cosmos: Revealing the Antikythera Mechanism, Scientific Wonder of the Ancient World" amzn.to/2NoLgIR
Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz): http://amzn.to/2HGPaJJ
Dormer A190202 Jobber Drill Set, 1.0 mm - 6.0 mm x 0.1 mm Size: amzn.to/2DR5fdb
Dormer A190203 Jobber Drill Set, 6.0 mm - 10.0 mm x 0.1 mm Size: amzn.to/2ITfeTa
YG1 NC Spotting Drill 8% Cobalt HSS 1/8 to 1/2" 120 Degree 5 Pc Set CNC Machine: amzn.to/2G7ylv6
Blue Matador Abrasive Paper - amzn.to/2IAFiBT
Heavy Duty Arbor Press: http://amzn.to/2G4gog7
Saint Gobain (Norton) - 4 Arkansas Stones + case: http://amzn.to/2HCOAMX
Abbreviated Transcript:
00:23 So what exactly is the structure of the mechanism? Well if you strip everything away, it comes down to this. A single main plate, with a single main bearing located at its center. The front planetary display is speculated to have been positioned just above the main plate, and the rear display is known to have been located on the other side. It's a 3 tiered structure providing support and alignment for the entire mechanism, and you can see that it has features spread across all 3 levels, that are all somewhat related.
01:41 Now its impossible to know for sure if the original maker used the same technique, but certainly some sort of systematic approach would have been essential.
04:07 Using one of the pins to gauge the progress of the taper. The pins were then hammered firmly into place, and the opposing holes on the other plate given a light countersink. Now for the plates to all sit flush when stacked, the pins must sit beneath the surface of each matching plate.
06:41 Registering each plate with the one beneath it. Again taking care to align the plates carefully before drilling, and placing the pins in regions of the mechanism known to be available space. I can now work with the plates aligned in a complete stack like this, or in various combinations as required, and be confident that the relative positioning of features will be accurate across all 4 plates.
07:49 The sub plate was then returned to the stack to pick up the correct position for the pillars, and finally the front dial plate was returned to the stack to drill out the pilot holes for the pillars. Now without register pins, this would have been quite a challenging task to manage.
10:44 And this is significant, because the presence of a square hole in the spacer leads to an unavoidable conclusion: That the part was in fact fabricated from 2 separate pieces. A spacer with a square hole, and a main bearing body, that were then pressed together to form the full bearing profile.
11:29 All throughout the device, virtually every sub assembly incorporates this idea of spacers and wheels, Either riveted together as a sort of layered sandwich, or threaded onto a shouldered arbor, or both. Certainly the wheels and spacers could have been formed from stock selected to achieve a specific clearance, much like this bearing. But its easy to imagine the maker taking it a step further.
12:13 With not much more than an flat abrasive surface and good eyesight, the maker could have achieved exceptional dimension control without any need for absolute measurement.
References:
Gears From The Greeks - Derek de Solla Price: http://amzn.to/2pii4ZD
The CT and PTM data that the AMRP have made publicly available can be found here: http://www.antikythera-mechanism.gr/data
Gear schematic can be found in Tony Freeth's 2012 research paper:
http://dlib.nyu.edu/awdl/isaw/isaw-papers/4/
Credits:
Clips from "The 2000 Year Old Computer" courtesy Images First Ltd.
The Antikythera Mechanism Episode 3 - The Plates And Main Bearing, by Clickspring.