Got Hosed Again.. CompEdgeX 2020-09-10 | Just a quick one as promised to a fellow Youtuber.. :-)Links to parts:shop.wurth.ca/fittings-hoses-tubing/tubing-hoses/air-hoses-kits-reels/air-hoses/highflex-premium-air-hose/glh-6red-highflex-air-hose-3-8id-50ft/884.10021shop.wurth.ca/fittings-hoses-tubing/tubing-hoses/air-hoses-kits-reels/hose-repair-ferrules/750-106-SCREW-ON-BRASS-FERRULE-5-8HOD-X--3-8HID/884.750-106shop.wurth.ca/fittings-hoses-tubing/tubing-hoses/air-hoses-kits-reels/hose-repair-ferrules/751-6B---SCREW-ON-BRASS-STEM-3-8HID-X-1-4MPT/884.751-6B
Covidated in 2020.. CompEdgeX 2020-04-19 | Quick synopsis of how things are going during the current world events.Getting started on a couple shop projects is a nice side-effect!!
RV Repair: The leaking kind..... CompEdgeX 2019-08-01 | Quick synopsis on pressure checking the LP system in an RV that has had a leak for some time.
Bent Thumbs up...and the Clown Crew. CompEdgeX 2019-08-01 | Got new recording device so we try it out....Excavator repairs and Cookie Dippers..What a combo.
Let’s do some dental work. CompEdgeX 2019-03-16 | Finishing up the repairs to the Colchester Quickchange gearbox.Braze repair to the shaft and re-cut the gearteeth.
Steering the Right Direction CompEdgeX 2019-03-12 | Repairs to a commercial fishing boat steering system
Aerial Shop Tour CompEdgeX 2018-12-27 | Too cold outside so playing with Xmas toys inside as the day Drones on.. ;-)
Shop happenings to end off the year. CompEdgeX 2018-12-23 | A few shop jobs, whats been going on, Colchester runs, Happy Holidays!!
Got Hosed part 4 CompEdgeX 2018-04-17 | New shop equipment fabri-cobbled in-house.Notable Mentions: Pierre's Garage: youtube.com/channel/UCVgocYJ_HmT8EfXnVqScTeAPhil's Projects: youtube.com/user/phildesjardins1Check out their channels...
Got Hosed part 3 CompEdgeX 2018-04-17 | New shop equipment fabri-cobbled in-house.Notable Mentions: Pierre's Garage: youtube.com/channel/UCVgocYJ_HmT8EfXnVqScTeAPhil's Projects: youtube.com/user/phildesjardins1Check out their channels...
Got Hosed part 2 CompEdgeX 2018-04-17 | New shop equipment fabri-cobbled in-house.Notable Mentions: Pierre's Garage: youtube.com/channel/UCVgocYJ_HmT8EfXnVqScTeAPhil's Projects: youtube.com/user/phildesjardins1Check out their channels...
Got Hosed in the Shop.. CompEdgeX 2018-04-17 | New shop equipment fabri-cobbled in-house.Notable Mentions: Pierre's Garage: youtube.com/channel/UCVgocYJ_HmT8EfXnVqScTeAPhil's Projects: youtube.com/user/phildesjardins1Check out their channels...compedgex@gmail.com
Another New (and last) Shop CompEdgeX 2018-04-04 | Quick breeze through of the new shop. It is our new home for the foreseeable future as I don't plan on moving all this stuff alone again. Also a great viewer gift a long time making it to video.
Line-boring a SnowPlow CompEdgeX 2017-03-08 | Been a while sitting in the editing room but finally got it together.Repairing a worn pivot point on a large plow.
Drive-Shafted.... CompEdgeX 2017-03-04 | Busted driveshaft arrived late one evening so stay late and record some footage..
Little Red Boxes..... and stuff. CompEdgeX 2016-03-27 | Run-through of a shop donation from a very generous person.No machining just candy. :-)
Line Bore.. CompEdgeX 2016-03-03 | Quick overview and test cut of a shop made line boring machine based off magdrill power unit.
Bush Hogging CompEdgeX 2016-02-11 | Making a batch of bushings for ships doors. 1.5" 1045 bushed with bearing bronze 1" with .755" hole Times 24!
Rolling the Wright Way 4/4 CompEdgeX 2015-09-29 | Construction of the Wright roller kit by Keith Fenner @ Turnwright Machine Works. http://turnwrightmachineworks.com/the-wright-store/the-wright-roller-kitsCanadian kit distributed by TIR Industrial Services (Rob Townsend)http://www.tirservices.ca/wright-roller-kits.htmlfacebook.com/TIRServices
Rolling the Wright Way 3/4 CompEdgeX 2015-09-28 | Construction of the Wright roller kit by Keith Fenner @ Turnwright Machine Works. http://turnwrightmachineworks.com/the-wright-store/the-wright-roller-kitsCanadian kit distributed by TIR Industrial Services (Rob Townsend)http://www.tirservices.ca/wright-roller-kits.htmlfacebook.com/TIRServices
Rolling the Wright Way 2/4 CompEdgeX 2015-09-28 | Part two of Construction of the Wright roller kit by Keith Fenner @ Turnwright Machine Works. http://turnwrightmachineworks.com/the-wright-store/the-wright-roller-kitsCanadian kit distributed by TIR Industrial Services (Rob Townsend)http://www.tirservices.ca/wright-roller-kits.htmlfacebook.com/TIRServices
Rolling the Wright Way 1/4 CompEdgeX 2015-09-28 | Construction of the Wright roller kit by Keith Fenner @ Turnwright Machine Works. http://turnwrightmachineworks.com/the-wright-store/the-wright-roller-kitsCanadian kit distributed by TIR Industrial Services (Rob Townsend)http://www.tirservices.ca/wright-roller-kits.htmlfacebook.com/TIRServices
Chips & Clips 2 CompEdgeX 2015-08-13 | Not many uploads as of late but here's a few clips of some of the happenings over the past few months.
More Madness - Ebay Auction Announcement! CompEdgeX 2015-02-12 | The auction for the mill stop has been set up at:http://www.ebay.ca/itm/Milling-Machine-5-Axis-Vice-Stop-/321667909581?eBay item number: 321667909581To inquire on shipping options go to canadapost.caClick "Find a Rate"Enter necessary info to your destination Use A1V 1W7 as sender1KG weight, and 20x16x6 cm as dimensionsIt will list all options available.Get your bids in!! ;-)
Mill-Stop the Madness!! CompEdgeX 2015-02-09 | Just a quickie notice for an upcoming Ebay auction that may be of interest for the machinist in YOU!!http://www.ebay.ca/itm/Milling-Machine-5-Axis-Vice-Stop-/321667909581?
Clips & Chips - 1 CompEdgeX 2014-12-24 | Long time coming but this is the new format for non-project specific video and pictures. It will include all the bit and pieces that make up the regular time at the shop. I hope to keep projects in separate videos to make things easier to find.Hope you enjoy, have a safe and happy holiday season everyone!!
Drawbar - Finale CompEdgeX 2014-09-26 | Finally got this project completed! It's been a long time coming. Big thanks to the guys that have helped make it happen!Herb Blair - YouTube/Herb BlairRay Caniglia - YouTube/Ray CanigliaStan Zinkoski - YouTube/Shadon HKWYou guys are indeed a great part of this YouTube community!Let's keep the chips flying.. ;-)
Drawbar - Almost done!! CompEdgeX 2014-09-25 | More progress on the drawbar project!This was a lengthy video for just one so I split it. Part 2 to up shortly.
Only slightly Hammered.... CompEdgeX 2014-09-22 | CV axle showed at the shop that had been victim to a ruthless hammer. Decided to make a new nut at slightly smaller thread size in order to retain the alloy characteristics of the metal instead of a weld buildup.
Shop....or not! CompEdgeX 2014-09-17 | A little shop update plus some excavator work for a viewer.. ;-)And a Birthday Present!!No machining in this one though.... :-(
Out-SMART-ed CompEdgeX 2014-08-26 | Modifications to a SMART car to allow for a hitch to be installed.
ALS Challenge CompEdgeX 2014-08-24 | So I got nominated by Brad over at Tactical Keychains and here we go.So just in case no-one gets it on the video we are nominating:Aunt Dee: MY sister Dolly ChippettDonna Chippett (ya, you know it!)and it gives me a small modicum of pleasure to nominate Mr Tom Lipton of OxTool infamy.
The Mill Stops Here..... CompEdgeX 2014-08-21 | Longest video ever for me but it's the best I could do with 5.5 hrs of footage... ;-)This is the making of my own design 5-Axis mill stops.Also a cameo appearance from my shop Assistant Jacob. ;-)
Rolling Right Along CompEdgeX 2014-08-06 | Repair of Planer roller in a first-time job originating from a YouTube viewer.Running The new EverLast PowerPro 256 in TIG mode and a few arc shots.
TIG Teaser CompEdgeX 2014-07-29 | Teaser for an upcoming video.Ya, I try on-camera TIG for the first time...... Sweet!Steve, you can tell Neil I still need the bearing for sizing!!
Raising The Roof! CompEdgeX 2014-07-28 | Just another day (or several) in the shop.Major roof repair to an RV unit.
Misc Clips June CompEdgeX 2014-07-16 | Wow, it doesnt take long for a month to go by. Some clips of what I've been doing lately....none of it in the machine shop.....
Getting My Head Straight! CompEdgeX 2014-06-16 | Time finally came to get the lathe dialed in after the move. And boy did it need it.... .007" in 5" error.Also, had some RV destruction stop in at the shop....
Shop.... Happens! CompEdgeX 2014-06-03 | No project work, just some shop happenings from the past while.Some LP work, and a few additions to the shop.
More Clips Plus DrawBar #1 CompEdgeX 2014-05-23 | A few more clips from this week: a look at some plastic weld finishing up the bike repair, unusual mill head positioning to drill some stock car axles for larger studs, and a start on the drawbar build.
Misc Clips CompEdgeX 2014-05-21 | Clips of a couple projects during the week.New package, quick bike spacers for a customer, and working on my own bike.
