Name: I Printed This Tool To Make Tapping Easy @Borgedesigns
Uploaded: 2024-10-17T08:17:00-05:00
Duration: 8 min 17 s
Description: I Printed This Tool To Make Tapping Easy

I Printed This Tool To Make Tapping Easy

Chris Borge 2024-10-17 | I Printed This Tool To Make Tapping Easy

They Said I Couldnt Fix It

Chris Borge 2024-03-05 | Man turns garbage into more complicated garbage.

Music:
Blue Danube, youtube audio library

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

A Normal And Logical Vacuum Forming Video #3dprinting #diy #3dprint #howto

Chris Borge 2024-02-23 | Music:
Strad, minecraft soundtrack

full video: youtu.be/HfOymggDOeQ?si=-OUIPhRhYePgQ78S

Lets Get Organized! #organization #diy #3dprinting

Chris Borge 2024-02-22 | Music:
Wait, Minecraft soundtrack

Files (AHAHAHAHAHAHAHAH):
printables.com/model/775633-small-file-holder

The Little Things Make A Big Difference! #diy #organization

Chris Borge 2024-02-21 | Music: Strad, minecraft soundtrack

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

I Invented The Worlds First Macuum Former

Chris Borge 2024-02-20 | This is one of the projects of all time

In this video I turn a broken Mac Mini into a vacuum forming machine. Why did I do this? Im still not sure myself.

MAKE THE WATCH:
printables.com/model/773292-retro-watch-skin

Or the mac-uum former (its not THAT bad)
printables.com/model/773327-the-worlds-first-macuum-former

Music:

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

How To Build A Camera Lucida

Chris Borge 2023-12-27 | Time flies aye.
Finally got around to making this, been busy finishing study.

The much requested build guide for my camera lucida design. Apologies on the wait.

Lucida 3D:
printables.com/model/526409-lucida-3d-portable-camera-lucida

Lucida basic:
printables.com/model/695381-basic-camera-lucida

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

I 3D printed A Camera Lucida #shorts

Chris Borge 2023-07-18 | FULL VIDEO: youtu.be/YNIJ46fhuKU

I Printed A 200 Year Secret Tool; Camera Lucida

Chris Borge 2023-07-13 | Camera Lucida, a tool invented in 1807 and the precursor to photography for capturing accurate images. In this video a print a new take on it and cover its history with the help of the contemporary expert on the topic, Professor Pablo Garcia.

Thankyou to Pablo for helping me with the interview for this video. An experts voice goes miles and brought ideas that I never would have found on my own.
Pablo's Neo Lucida:
neolucida.com

Files:
Lucida 3D: printables.com/model/526409-lucida-3d

Felipe Sai, camera lucida:
thingiverse.com/thing:4529152

Build guide: Coming Soon (I need a day off)

Affiliate links to equipment I use:

Ortur Laser Master 3:
https://s.zbanx.com/r/ZBJXsUyGmz46
Use code DB105 for $105 off

Music:
Minecraft soundtrack :)

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Timestamps:
0:00 intro
1:28 What Is Camera Lucida
5:07 My design
7:20 Who Used Camera Lucida
10:49 Testing My design
13:22 How you can get a Camera Lucida
14:08 outro
14:24 the death of camera lucida

Organizing My Life With Lasers

Chris Borge 2023-05-31 | Skadis is great, just wish it came in more sizes. But why wish when you can cut your own on a laser?

Thankyou to Ortur for sponsoring me with the laser used in this video. If you are interested in picking one up for yourself you can do so using the following link (affiliate):

https://s.zbanx.com/r/ZBJXsUyGmz46

Use code DB105 for $105 off

Skadis board maker:
printables.com/model/206256-parametric-skadis-board-generator

Parts:
printables.com/model/495104-a-small-skadis-assortment

Music:

Scratch the itch- quincas Morei
Take it easy- bad snacks
A Night Alone- Track Tribe

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

How To Build Your Own Printed Multitool

Chris Borge 2023-03-13 | The Long Awaited (?) build guide for the model 303 card tool. Usual style, lower effort than the normal videos just whatever makes the process the clearest.

Music: MydNyte - Noir Et Blanc Vie

Part 1: youtu.be/sD0iNubrY_o
Files: printables.com/model/391307-model-303-wallet-multitool

BOM:
7 M 1.6* glasses screws, between 4-4.5mm long, $4 AUD
Flat head pin, up to 30mm long, $3 AUD
2*4 mm lengths of spring 2mm in diameter, optional but recommended, $5 AUD
Replacement pen for victorinox swiss card, $2 AUD
Replacement tweezers for victorinox swiss card, $5 AUD
“11 in 1 wallet multitool”, $5 AUD and up
Craft blades like a #11 or similar, $2

A key, LW4, $5

OR

SD card + adaptor

Total: 28 AUD/ 18 USD

These are the cheapest prices I could find to buy but many come with far to many pieces. A google search will find all of these easily.

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

This Multitool Is 3D Printed

Chris Borge 2023-02-06 | PARTS:
printables.com/model/391307-model-303-wallet-multitool

I like wallet multitools. They are convenient for most of my day to day needs but nothing on the market quiet does everything I want. Ive made some (poorly) in the past, so come with today as I fix my past mistakes.

Music:
Wehrmut- godmode
Soft Knives- sefchol
Tempos Vari- Freedom Trail Studio

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

I Printed The Perfect Fume Extractor

Chris Borge 2022-12-24 | happy holidays
FILES:
KIRBY:
printables.com/model/348385-kirby-40mm-fume-extractor
MODEL 302:
printables.com/model/348425-model-302-40mm-fume-extractor

Kirby sucks. So do fume extractors. You do the math.
Music:
Kirby squeak squad OST
Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Tapping Arm: Build Guide!

Chris Borge 2022-12-09 | A build guide! BOM on the following sites.

thingiverse.com/thing:5683329
printables.com/model/334976-tapping-arm-and-addons

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

I Printed This Tool To Break Less Taps

Chris Borge 2022-12-05 | Long time no see (for real this time)
ive been taking time to move into my new studio/ workshop in-between other work and making stuff. Ive been reflecting on how im not really satisfied with some of my old work and I want future projects to be actually useful tools not just experiments, so like with this im taking more time to test and use the tools before publishing.

FIles:
thingiverse.com/thing:5683329
printables.com/model/334976-tapping-arm-and-addons

BOM on both
WILL UPLOAD TO PRINTABLES ECT IN THE MORNING

Tapping jigs are commercially available but I was unhappy with what was out there so considering how simple in nature they were, I went to design my own.

Music:

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Organise Your Cables With This Filament Spool Organiser (Parametric!)

Chris Borge 2022-02-01 | A parametric cable organise that is made using old fillament spool! get organised and use up some of those pesky spools!

PARTS:
Prusa (Use this one, you dont need to sign up and it supports me!)

prusaprinters.org/prints/127028-parametric-filament-spool-cable-organiser

Thingiverse (if you must :/ )

Music:
Track 1- Night Run Away
Track 2- Wolf Moon

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
Prusa:
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Super Simple 3D Printed Plastic Bottle Cordage Maker | Tutorial + Uses

Chris Borge 2022-01-13 | im baaack. tldr I drove through a desert and then built a workshop so haven't been making regular videos. many many coming soon now that its done.

In this video I revisit my bottle cordage maker and completely overhaul it, as well as showing a bunch of use cases.

Donations much appreciated :)
paypal.me/cborge333

PARTS:
*downloading from PRUSA supports the channel through their prusameters program, so I would prefer if you download from there!*

Prusa: prusaprinters.org/prints/118602-plastic-bottle-cordage-maker-v3

Thingiverse: thingiverse.com/thing:5198280

Music:

Intro: The World's fair - godmode

Mid: Six Seasons - Unicorn Heads

Outro: Hannon - Jeremy Black

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

REFERENCES/ LINKS:

Filament videos:
1- youtu.be/qRcsYdBe298
2- youtu.be/UHXBOzjKNXY
3- youtu.be/Eecbdb0bQWQ

Fishing with cordage: youtu.be/QraoLyg_BF0

Grim workshop: grimworkshop.com

Recycling plant tour: youtu.be/nUrBBBs7yzQ

Chapters:
0:00 intro

0:35 comparison to v1

1:40 overview

2:19 assembly

3:38 how to use

4:27 How to make cable wraps

5:45 general uses

6:31 making filament

7:13 outdoors/ survival uses

10:13 options to buy

10:49 environmental considerations

12:19 outro

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Die Filer Shreds Metal (part 1)

Chris Borge 2021-09-17 | Donations much appreciated :)
paypal.me/cborge333

So I 3D a die filer. in this video I show what I've made so far and what I still have to do. I Teased this a while back but due to a certain vise and some issues with building it its taken longer than planned. I wanted to get this up today since im away all of next week and didnt want to put it off any more.

Open source as usual, ill have the files up a bit later

*this is still a WIP! This video is showing my progress so far, part two will be the final version which will go over the final design decisions ect. WOULD NOT RECOMMEND PRINTING YET! Files are just for anyone curious or who may be working on something similar.*

FILES: thingiverse.com/thing:4968102

Music:
Intro: tiptoe out back
Main: six seasons, unicorn heads
(taken from youtube audio library)

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

References:

Sheet metal process:
youtube.com/watch?v=5CuJjSk4U38

First recorded die:
copper.org/education/history/60centuries/industrial_age/invention.html#:~:text=In%201769%20the%20first%2Dnamed,from%20sheets%20in%20bulk%20quantities.

All american die filer document:
http://wentztech.com/WebDisk/Metalworking/Die%20Filer/All%20American%20Filing%20Machine.pdf

Progressive die example:
en.wikipedia.org/wiki/Die_(manufacturing)#/media/File:ProgressiveDieToyota-strip-scrap.jpg

What is EDM?:
youtu.be/pBueWfzb7P0

EDM diagram source:
en.wikipedia.org/wiki/Electrical_discharge_machining#/media/File:Wire_erosion.png

Other die filer videos:

youtube.com/watch?v=6lxJ3E_UjtY

youtube.com/watch?v=ZNwvjaIW-pU

youtu.be/efI1kdhtjOM

TIMESTAMPS:

0:00 intro

1:56 background info

4:04 why not buy one?

4:32 project goals

4:43 costs

5:21 files it can use

6:04 changing support plates

6:20 adjust table tilt

6:48 the fence

7:34 file support arm

7:50 motor specs

8:25 print fails!!

9:27 test 1

10:31 test 2

10:44 test 3

11:20 design issues

12:21 outro
My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Fractal Vise Build Guide

Chris Borge 2021-08-21 | This is the build guide for my vise. its a longer video but I figure if your making one being to specific cant hurt. I hope this covers everything.

Files: thingiverse.com/thing:4931700

Source files: dropbox.com/sh/7bpgve4as4jl0lq/AAApnlVQ8KqblNU9pDvvBI38a?dl=0

Music: Islabonita - An Jone

Follow my socials:
Instagram: borge_design
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Timestamps:
0:00 intro

0:26 non printed hardware

01:14 part printing orientation

01:37 small jaws

06:06 TPU jaw

06:27 leadscrew filing

7:00 begin assembly

18:33 outro

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Fractal vise V2: Overview + CNC router testing

Chris Borge 2021-08-13 | The "long awaited" version 2 of my fractal vise! Now optimised for use not just show! In this video I show my new designs, upgrades, and test it in a variety of scenarios. I think it for sure it is a useful tool as the results in this video show.

Build video up next so sit tight for that.

In regards to the comments in the video, its something im trialling, obviously I cant fit all comments in, in this case I collected these a few weeks back so sorry if you made a similar suggestion and were not featured.

Parts:
thingiverse.com/thing:4931700

Source files:
dropbox.com/sh/7bpgve4as4jl0lq/AAApnlVQ8KqblNU9pDvvBI38a?dl=0

Materials list:
~around 1.8M of 4.5mm/ 3/16th threaded rod
3x m4 bolts at least 70mm long
~30cm 1.5mm rod for jaw type A
very small elastic for jaw type A
TPU for jaw type B
Appropriate nuts washers ect.

Music:
6 seasons: unicorn heads

fully printed vise by ToMaTo Lab:
youtube.com/watch?v=nqj4Pu4hsq8

0:00 intro

0:19 thanks for last time

0:55 comparison to v1

1:21 new jaws

2:40 new body design

4:39 testing

6:25 CNC testing

8:54 upgrades

10:30 final thoughts

10:57 outro

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Fractal Vise (WIP!!!)

Chris Borge 2021-06-30 | Parts:

thingiverse.com/thing:4897556

I see video, I want thing I make thing.
I said it in the video but ill say it again, it works but is a WIP and I will probably change some things as I polish it in the future. I think what I have so far is a good proof of concept that these vises can be 3D printed effectively. Even this early version still holds things very well!

Hand tool rescue:

youtube.com/watch?v=QBeOgGt_oWU

Music:

Ghost Dance by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0

Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100573

Artist: http://incompetech.com

Just dance by:
youtube.com/channel/UCTPI2hZYxoHtdGEpdFoaU5A

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Wood Lathe V4!

Chris Borge 2021-05-31 | A slightly upgraded version of my wood lathe, with some fixes and new parts. Could be considered a "final" version of this design, its more polished than the previous versions.

PARTS: thingiverse.com/thing:4874288

Music:
1- Just dance

2- The worlds Fair

from youtube audio library

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Anycubic Photon 0 Print Not Starting Fix

Chris Borge 2021-05-12 | So my photon and apparently some others as well like to randomly stop working for no apparent reason, in this video I update the firmware to fix the issue.

Really cant reccomend this printer, it prints yes but it is an absolute pain to work with for reasons such as this one. Spend the extra hundred to get a photon S rather.

Music: nope!

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

(1000 sub special) Workshop tour + channel updates

Chris Borge 2021-04-01 | ahahhHEhahahaha April fools!!!!!!!!

More actual content coming soon! I hope!!!
Music:

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Mini Chop Saw 3D Printed DRO Upgrade!

Chris Borge 2021-02-14 | After buying a cheap Mini Chop Saw off of eBay, I saw some room for improvement. I may make some more mods in the future but this one, making a simple attachment for a cheap set of eBay callipers, was the most obvious for me. Requires no drilling or cutting of the saw or the callipers!

Parts: thingiverse.com/thing:4761985

Music: Marxist arrow

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed DND Spell Tracker!

Chris Borge 2021-01-21 | A 3D printed stat tracker for playing DND!

Parts:
youtu.be/Ei0PX8uxiEU

Music:
serpentsoundstudios.com/royalty-free-music/celtic-fantasy
Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Dremel lathes; A Bad Idea?

Chris Borge 2021-01-09 | Why I wont be releasing my Dremel lathe.

tl;dr, a dremel has to high RPM, to low torque to be good for wood turning. I felt very unsafe using it.

A more expert video: youtube.com/watch?v=8lq78dWdwH4

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Manual Mill- Build Video

Chris Borge 2021-01-06 | Finally done with this.

Parts:
thingiverse.com/thing:4621593

Main video:
youtube.com/watch?v=f_YHH4x78OU

Parts list:
docs.google.com/document/d/1tXt6cKK5RWPhWFaBYoYP7OQ9uzSXPP-uHx3xKvjvhr4/edit?usp=sharing

Music:
Contact high, RKVC
Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Wood Lathe- Build Guide

Chris Borge 2021-01-02 | its here and it is what it is

Any further questions feel free to ask

Music:
Polyphonic Congas - Unicorn Heads

Thingiverse parts: thingiverse.com/thing:4678844

Other parts:

27cm 5/32nd rod, 2-3

m4*20mm bolts, 2
m4*15mm bolts, 8
m3*20mm bolts, 4
m2*20mm bolt, 1

3/16th threaded rod lengths, 13cm, 4
3/16th threaded rod length, 9cm, 1

3/16th ~50mm bolts, 4

3/16th nuts, 14

6mm rod, 30cm

5mm rod, 9cm, 1

er 11 collet chuck, 5mm mount

small wood screws, 13

1.7mm thick aluminium plates, 30*30mm, 3

4* 10mm OD, 5mm ID bearings

2* 10mm OD, 6mm ID bearings

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

How Much Did I Spend On 3D Printing In 2020 (And Other 2020 stuff)

Chris Borge 2020-12-31 | Music:
Contact High - RKVC

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from Australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Turning 100 Year Old Redgum (On a 3D Printed Lathe)

Chris Borge 2020-12-28 | Another wood turning video woooo!!!

Music:
Marxist arrow

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Keychain Fire Kit

Chris Borge 2020-12-26 | Music:
I feel like partying right now

Parts:
thingiverse.com/thing:4697639

https://www.ebay.com.au/itm/Outdoor-Survival-Camping-Tool-Magnesium-Flint-Scraper-Stone-Fire-Starter-Lighter/174302572893?hash=item28953e315d:g:AxgAAOSwPJxe1Lud

https://www.ebay.com.au/itm/NEW-Aluminum-Pill-Box-Case-Bottle-Cache-Drug-Holder-Keychain-Container-Waterproo/143620575968?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

https://www.ebay.com.au/itm/5PCS-mini-Emergency-Flint-Fire-Starter-Rod-Lighter-Magnesium-camping-tool-kits/274444584733?hash=item3fe62c071d:g:u34AAOSwnF9Y6wjA&frcectupt=true

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

Making Hammers On A 3D Printed Lathe (Christmas special 2020)

Chris Borge 2020-12-25 | Music:
Carol of the bells
Holly Dazed
We Wish You a Merry Christmas (Instrumental Jazz) - E's Jammy Jams

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Mill Build Video Update + General Channel Stuff

Chris Borge 2020-12-20 | made at 3am lesgo

TEMP PARTS VIDEO:
youtu.be/7UfhFsHoo3A

PARTS LIST DOC (WIP): docs.google.com/document/d/1tXt6cKK5RWPhWFaBYoYP7OQ9uzSXPP-uHx3xKvjvhr4/edit?usp=sharing

Follow my socials:
twitter- twitter.com/borgey5

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

3 Useful Tools For 3D Printing (That You May Not Have Thought Of!)

Chris Borge 2020-12-14 | Music: Theme for a one handed pianist

Parts: thingiverse.com/thing:4685375

Hammer (shop around, there could be cheaper!):
https://www.ebay.com.au/itm/Car-Safety-Hammer-Seat-Belt-Cutter-Window-Breaking-Emergency-Escape-Tool-W8/184565423459?_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20160908105057%26meid%3Dd59aa645e14844c2a46c858d2bc8bd0b%26pid%3D100675%26rk%3D4%26rkt%3D15%26mehot%3Dnone%26sd%3D143739987330%26itm%3D184565423459%26pmt%3D1%26noa%3D1%26pg%3D2380057%26brand%3DUnbranded&_trksid=p2380057.c100675.m4236&_trkparms=pageci%3A6393d1d3-3e11-11eb-84b1-3a22e3916a12%7Cparentrq%3A61779ab91760ada186ec34a5fff7dca8%7Ciid%3A1

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Wood Lathe (V3)

Chris Borge 2020-12-08 | Parts: thingiverse.com/thing:4678844
Parts on cults: cults3d.com/en/3d-model/tool/wood-lathe-version-3

Music:
Flight of the Bumblebee
OP_28

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Wood Lathe (Part 1) (WIP)

Chris Borge 2020-11-16 | yes, I know that i nearly cut my hand off at the start. im working on it.

Music: The sound of a dollar by DJ Williams

PARTS:
thingiverse.com/thing:4655283

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Milling Machine (Part 2) - Wood Lathe Addon

Chris Borge 2020-11-06 | Another addon for the mill, this time adding wood lathe capabilities.

Parts:
thingiverse.com/thing:4644865

Music:
Marxist Arrow by Twin Musicom is licensed under a Creative Commons Attribution 4.0 license. creativecommons.org/licenses/by/4.0

Artist: http://www.twinmusicom.org

Follow my socials:
twitter- twitter.com/borgey5

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

3D Printing Isnt Just For Making Toys and Trophies

Chris Borge 2020-11-02 | A bit of a different video because it was made for a uni assignment and had to meet certain requirements but I thought eh may as well chuck it up here as well. Mill updates and more coming soon!

Music:
Theme for a one handed piano concerto by Sir Cubworth

Follow my socials:
twitter- twitter.com/borgey5

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

3D Printed Milling Machine (Part 1)

Chris Borge 2020-10-12 | Music: no.9 Esthers Waltz

PARTS:
thingiverse.com/thing:4621593

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Drill Press (Part 3) - Basic Drill Build Video

Chris Borge 2020-09-18 | A more in depth build video. Ill be honest im not that happy with this but im not sure why so if you have any questions, feel free to ask.

Also trying no music for most of this one, ive found it to be distracting in other videos so let me know how that goes.

PARTS:
Main parts:
thingiverse.com/thing:4575661

Table, tube holders:
thingiverse.com/thing:4581998
A video with more info: youtube.com/watch?v=6kxvxxR7nMM

Music: Strange Stuff by Matt Harris

Follow my socials:
twitter- twitter.com/borgey5
thingiverse- thingiverse.com/borgey/designs

DETAILED PARTS LIST:
All Brass/ alumium is from K&S precision metals, IK its a common thing in AU and US at least (its a US brand)

The bolts kit I use:
https://www.ebay.com.au/itm/500pcs-Screws-Set-Nuts-and-Bolts-Metric-M3-M4-M5-Hex-Socket-Head-Assortment-Kit/372791719657?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

The brass inserts I use:
https://www.ebay.com.au/itm/Nut-Brass-Threaded-Equipment-Accessories-150pcs-Insert-For-3D-Printing/324009258812?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

5/32nd brass rod: 2x90mm lengths, 2x 12cm+ lengths

5mm steel rod: 90mmish

Aluminium plate: 100.6mm *

2x10mm od bearings, 5mm id

5x m3*16mm bolts

3x m3*20mm bolts

1xm4*20mm bolt

2x springs

Like subscribe all that stuff

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Drill Press (Part 2) - Table and Updates

Chris Borge 2020-08-28 | Drill press part 2.

PART 1: youtube.com/watch?v=Uh-EpV1XfyQ

Music: ill update in the morning not on the PC with the name rn ahahah

Parts: thingiverse.com/thing:4581998

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Drill Press (Part 1)

Chris Borge 2020-08-21 | A 3D printed drill press ive been working on recently, part 1. Still a WIP

Download (STILL A WIP BUT HEY ITS HERE ANYWAYS): thingiverse.com/thing:4575661

Intro music: Sneaky Bass Latina from youtube audio library

Music 2:
Op 028 [Free Stock Music | Jazz | Instrumental] by natuch speaker: https://soundcloud.com/natuch_speaker...
Attribution-ShareAlike 3.0 Unported (CC BY-SA 3.0)
https://creativecommons.org/licenses/...
Music provided by Free Vibes: goo.gl/NkGhTg

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Random Ramble #2 - Watchmakers Lathes Show and Tell

Chris Borge 2020-08-15 | whats up. No video this week because my weekly project has been a bit bigger than usual so look out for that in the next few days. anyways for this weeks casual video, I show off and talk about my watch makers/ jewellers lathes, 2 beautiful pieces of machinery that I acquired some years ago and hope to show off more in future videos.
My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Random Ramble #1 - My Everyday Carry (August 2020).

Chris Borge 2020-08-08 | In an effort to appease the algorithm and just because I was bored, I am planning an additional video per week. Unscripted and casual in style ill talk about gear or just random stuff that I feel like talking about. This weeks episode I talk about my current every day carry.

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Upgrading a Cheap Multi-tool with 3D Printing

Chris Borge 2020-08-06 | So recently ive started doing something I never thought id do: Using one of those rubbish $2 card multitools. But I saw room for improvement, which is what this video is about.

DOWNLOADS

Regular:
thingiverse.com/thing:4562778

Cyberpunk:

Music:

1- I feel like partying right now

2- strange stuff by Matt Harris

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3 Easy Bottle Cordage Makers (No 3D Printing)

Chris Borge 2020-07-27 | Whats up everyone

As a follow up to my last video, here are 3 more bottle cordage makers, this time using 0 3D printing.

These things are cheap and easy to make and all function effectivly even if I didnt show if in the video (Filming myself is a pain, Im working on getting a better setup that allows me to reposition my lights better for future videos)

Music is valley of spies by The Whole Other

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

3D Printed Plastic Bottle Cordage Tool (Detailed Assembly Guide)

Chris Borge 2020-07-19 | A longer, unscripted but also much more detailed assembly guide for the rope maker.

VIDEO 1: youtube.com/watch?v=x8AFc1IqZ1I

DOWNLOAD: thingiverse.com/thing:4545918

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

Make Rope from Plastic Bottles with this Tiny Tool

Chris Borge 2020-07-18 | Hey guys, whats up. This is my take on plastic bottle cord makers. This "hack" has been around for a while and the design here is for a simple, compact and easy to use version that is practical to be added to any survival kit or pack. It produces strong cordage that has many applications. It could also be used for craft applications.

DOWNLOAD HERE:
thingiverse.com/thing:4545918

MUSIC: Reverie by Quincas Moreira

SCREW DRIVER BIT EXAMPLE:
https://www.ebay.com.au/itm/Portable-8-In-1-Precision-Screwdriver-Bit-Set-Pen-Style-Repair-Kit-Tool/184024520341?hash=item2ad8b75695:m:m2Se8ruy0XuEsEHJ8ljPPnQ

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

An Informal Tour of my Aquaponics Setup (Duck Reveal?!?!)

Chris Borge 2020-07-15 | hello there. This video is a tour of a "aquaponics" setup that I built to keep my duck pond cleaner for longer. while simple and cheap it has helped greatly with the smell and we need to change the water much less.

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.

How to make a TINY LED Torch

Chris Borge 2020-07-10 | Hey guys, long time no see. this video I show off my latest creation, a tiny torch intended for altoids tin survival kits.

link to download: thingiverse.com/thing:4537464

Music is Sweet Release by Dan Lebowitz

My name is Chris, I am a 3D printing hobbyist from australia. I dont really specialise in anything specific, but 3D printed tools and tabletop accessories are some things youll probably seen quiet often. I do all my 3d printing on a Ender 3, which I highly recommend as a budget printer. Currently I only run 1 printer but I hope to expand that in the future. Recently acquired a photon 0 to do resin printing with. I like to share all my 3D printing ideas for free although I do plan to sell stuff in the future. Most of my projects will be mostly 3D printed with a few non printed components included, these can often be found on ebay. I actually use the cheapest filament I can get for all my projects, again I hope to change this in the future.