Uploaded February 2025 | Updated September 2026, 2 weeks ago
Link to purchase product:
Symptoms of Fault
Broken tail light, poor visability when reversing
The Fault
Poor visability when reversing makes it easy to smash the tail lights
The Ford Transit Tippers, Dropsides and Lutons have poor visability when reversing, owing to a lack of sensors and cameras from factory combined with blind spots. The tail lights are the rear-most part of the vehicle and have no protection and thus easy to smash when manouvering.
The Solution
Protect your tail lights with the X8R tail light guards
Introducing the new X8R tail light guards, this listing is for the "essential" kit - the drill-on covers. These covers are easy to install, look the part, are the best and highest quality on the market and are easy to remove & replace to change bulbs.
Our covers are made from 3.5mm zinc-plated steel which is rust-resistant, hard-wearing and robust. Other options on the market are made from thinner material and more likely to bend under impact and therefore damage the tail lights underneath. Owing to the thicker material our lights have larger gaps to shine more light at night and improve visability to other road users.
To install simply drill four pilot holes using the drill bit provided, slide over the cover and insert the bolts & washers. To change a bulb simply undo the bolts and lift off the covers to access the tail lights.
Vehicles Affected
Ford Transit Tipper/Dropside/Luton MK6 2006-2014
Ford Transit Tipper/Dropside/Luton MK7 2014-2020
Ford Transit Tipper/Dropside/Luton MK8 2020 onwards
You Will Receive
1 x Pair of tail light guards (covers) made from 3.5mm zinc plated steel
4 x Self-drilling flange stitching screws
4 x EPDM rubber cushioned waterproof bonded washers
Link to purchase product:
Symptoms of Fault
Broken tail light, poor visability when reversing
The Fault
Poor visability when reversing makes it easy to smash the tail lights
The Ford Transit Tippers, Dropsides and Lutons have poor visability when reversing, owing to a lack of sensors and cameras from factory combined with blind spots. The tail lights are the rear-most part of the vehicle and have no protection and thus easy to smash when manouvering.
The Solution
Protect your tail lights with the X8R tail light guards
Introducing the new X8R tail light guards, this listing is for the "essential" kit - the drill-on covers. These covers are easy to install, look the part, are the best and highest quality on the market and are easy to remove & replace to change bulbs.
Our covers are made from 3.5mm zinc-plated steel which is rust-resistant, hard-wearing and robust. Other options on the market are made from thinner material and more likely to bend under impact and therefore damage the tail lights underneath. Owing to the thicker material our lights have larger gaps to shine more light at night and improve visability to other road users.
To install simply drill four pilot holes using the drill bit provided, slide over the cover and insert the bolts & washers. To change a bulb simply undo the bolts and lift off the covers to access the tail lights.
Vehicles Affected
Ford Transit Tipper/Dropside/Luton MK6 2006-2014
Ford Transit Tipper/Dropside/Luton MK7 2014-2020
Ford Transit Tipper/Dropside/Luton MK8 2020 onwards
You Will Receive
1 x Pair of tail light guards (covers) made from 3.5mm zinc plated steel
4 x Self-drilling flange stitching screws
4 x EPDM rubber cushioned waterproof bonded washers
