Prevent Back Voltage in Your CNC Controller with Diodes @corvetteguy50
Prevent Back Voltage in Your CNC Controller with Diodes  @corvetteguy50
Uploaded September 2026 | Updated November 2026, 3 hours ago
Join me as I wrap up the Avid retrofit. I finalized the e-stop and brake wiring and show live testing so you can see the result.

Products used in this series:
Omni Vise system - ebay.com/itm/146743216257
All Ports enclosure - ebay.com/itm/133546902468
Kester solder & flux - ebay.com/itm/145871539775
Biotronic flux remover - ebay.com/itm/136507703379
22AWG double-shielded 20ft cable - ebay.com/itm/145089695270
22AWG double-shielded 20ft cable & E-Stop - ebay.com/itm/141231277325

If you have questions or require quotes or consultations - please email me at storm2313@gmail.com

Standalone kits:
Essentials Standalone Package - ebay.com/itm/137509672457
Standalone with ETH and G540 - ebay.com/itm/137515639170
Plasma Standalone Package with THC - ebay.com/itm/137525808956?


🔧 For vetted components, with validated support please visit my store: ebay.com/str/edealersdirect

#CNC #CNCrouter #DIYCNC #CNCfail #IndustrialAutomation #CNCmachining #Engineering

Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time.

Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.

ETH-Compact Ethernet Controller & THC Sensor Module
ebay.com/itm/146755320152

SMCU motion controller driver
ebay.com/itm/146206341057

Standard Gecko G540 motion controller
ebay.com/itm/142506267150

20' 16/4 double-shielded spindle cable
ebay.com/itm/131899174942

Here's a link to my UC-400 Ethernet Turnkey Controller package ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
ebay.com/itm/133300288430

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) ebay.com/itm/143650166809

CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter ebay.com/itm/134192466153
Prevent Back Voltage in Your CNC Controller with DiodesWaterproof Switches: Essential for Plasma Systems!The Ultimate General Purpose Standalone Controller Kit!Be Cautious with this 3-Phase Power Cable!Robot Calibration: Stop Hard Stops Now!Your Machine Looks Grounded. Check Again.48V Fan  Tiny Size, HUGE AirflowDremel Polishing - Achieve Perfect Finish with Low RPMSlow and Steady Wins the Race when Using a DremelTest Switches FIRST for NO Headaches!Which Cable is BEST for Your ApplicationA THANK YOU Gift - FREE Canadian & European Shipping or FREE 300oz Motors!
Corvetteguy50 |

Prevent Back Voltage in Your CNC Controller with Diodes

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER