Robot Calibration: Stop Hard Stops Now! @corvetteguy50
Robot Calibration: Stop Hard Stops Now!  @corvetteguy50
Uploaded August 2026 | Updated November 2026, 3 hours ago
My goal in today's video is to warn you guys once again about being careful who you listen to online when building and buying your CNC system!

We review pieces of a few different videos I found online. The topics we cover are as follows:
- Hard end stops - guy, use soft limits!
- Using a USB controller on a PLASMA table - that's a no-go!
- Immediately inform the vendor of any damage or you might be left with a very expensive paper weight!

If you have questions or require a consultation - please email me at storm2313@gmail.com

Standalone kits:
Essentials Standalone Package - ebay.com/itm/137509672457
Standalone with ETH and G540 - ebay.com/itm/137515639170
Plasma Standalone Package with THC - ebay.com/itm/137525808956?


🔧 For vetted components, with validated support please visit my store: ebay.com/str/edealersdirect

#CNC #CNCrouter #DIYCNC #CNCfail #IndustrialAutomation #CNCmachining #Engineering

Please do your own research before making any purchase for production robotic components. When in doubt ask, and I highly recommend messaging a vendor to test their response time.

Below is a link to my CNC components that support the issues covered in this video along with other products to support your builds.

ETH-Compact Ethernet Controller & THC Sensor Module
ebay.com/itm/146755320152

SMCU motion controller driver
ebay.com/itm/146206341057

Standard Gecko G540 motion controller
ebay.com/itm/142506267150

20' 16/4 double-shielded spindle cable
ebay.com/itm/131899174942

Here's a link to my UC-400 Ethernet Turnkey Controller package ebay.com/itm/144862296429

CNC 18/4 Double Shielded Pre-Built Motor Cable With All Required Connectors
ebay.com/itm/133300288430

CNC Double Shielded Breakout Communication Cable (Gecko Drive, Onefinity CNC) ebay.com/itm/143650166809

CNC Cooling Fan 30-48v 60mm x 38mm (65CFM) Tool Less Mount, Fan Grill, & Filter ebay.com/itm/134192466153
Robot Calibration: Stop Hard Stops Now!Your Machine Looks Grounded. Check Again.48V Fan  Tiny Size, HUGE AirflowDremel Polishing - Achieve Perfect Finish with Low RPMSlow and Steady Wins the Race when Using a DremelTest Switches FIRST for NO Headaches!Which Cable is BEST for Your ApplicationA THANK YOU Gift - FREE Canadian & European Shipping or FREE 300oz Motors!Are You REALLY Grounded  Test Resistance With a MultimeterHow to Expand the Gecko G540s Inputs & OutputsBuild a 5-Axis CNC System for Under $5KThe simplest turnkey 5th axis expansion kit on the market
Corvetteguy50 |

Robot Calibration: Stop Hard Stops Now!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER