Polaris Head Float @diycollaborative
Polaris Head Float  @diycollaborative
Uploaded November 2022 | Updated November 2026, 3 hours ago
Thank you for checking out our video.

In this quick video, we’ll show you how to check the head float on your Polaris 280 pool cleaner. If your pool cleaner is laying on its side when running, then there’s an easy way to check this.

Like most of our mechanical devices, your pool cleaner will require periodic adjustments, routine maintenance, and the replacement of certain parts. For anyone that has one of these cleaners you probably already know what a workhorse it is.

We run ours twice a day and it does an excellent job of keeping much of the debris picked up. Depending on the size of your pool and surrounding conditions, you should adjust your pool cleaner accordingly.

One thing that I strongly recommend is to keep a small bin or container of minor spare parts on hand. The cost won’t be too excessive and when a minor part breaks or needs replacing on your pool cleaner, you’ll be ready to replace it, and will be able to keep your pool crystal clean and ready to use.

Some replacement parts are expensive so it might be challenging to keep them on hand but most of the components can be purchased online and you’ll be able to get them pretty fast. You can check out our Amazon links below or go to our Amazon store for a more detailed list of parts for pool cleaners.

To check if the head float needs replacing simply remove it from the feed pipe and shake it to see if there’s any water inside. Over time the head float can get a tiny hole in it causing it to take on water. When this happens it’s no longer able to run in the upright position and needs to be replaced.

Thanks for watching!

Please Like and Share this video and Subscribe to our channel if you haven't done so already.

We would also appreciate your comments and questions and a thumbs up if you like what you see.

Amazon Affiliate Links:

Polaris Head Float: amzn.to/3fpKM86
Polaris Bags: amzn.to/36svwD5
Pool Cleaner Tail Scrubber: amzn.to/3qzEt4o
Pool Cleaner Hose Swivel: amzn.to/3JQNFZy
Polaris Sweep Hose Assembly: amzn.to/3uk04Pa
Backup Valve Kit: amzn.to/3JLrkgk
Pressure Relief Valve: amzn.to/3IFpT1r
Universal Wall Fitting Quick Disconnect: amzn.to/3izgFJG
Wall Fitting Filter Screen: amzn.to/3LeDmiA
Polaris Complete Feed Hose: amzn.to/3Ix9sEt
All Purpose Tire for Polaris: amzn.to/36pt9Rv

Some of the links in this description may be affiliate links, which means we may receive a small commission, at NO ADDITIONAL cost to you if you decide to purchase something.

For business inquiries please contact: don@thediycollaborative.com

#diycollaborative
Polaris Head Float🚫⚠️Pool Pollen | Spring Pool Problems: Pollen Season is Here! 😠How To: Replace The Water Filter On Your Samsung French Door RefrigeratorWhy I Switched to a 50 Foot HoseSeed Starting 🌱 🪴 🌿I Almost Cut This Down… Then I Took a Closer Look (Burr Oak)How I Repaired a Cracked Concrete Patio with Sakrete Crack FillerDIY Cattle Panel Trellis 🌿 | Easy & Cheap Garden Upgrade! 🛠️💰✂️Deadhead This Salvia for Nonstop Blooms! 🔥 | Garden Tip You’ll Love ❤️🌾🧑‍🌾 Purple Fountain Grass Propagation Made Easy | Garden DIY Guide 🪴💧🌞I added compost to a shady corner… then THIS happened! 🌿🎃✅ 2 Simple String Trimmer Hacks to Stop Line Breaks & Tangles 🛠️ #wd40 #DIYHacks #WD40Uses
diy collaborative |

Polaris Head Float

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER