Plugging Screw Hole Locations @ToolsToday
Plugging Screw Hole Locations  @ToolsToday
Uploaded June 2026 | Updated November 2026, 2 days ago
Countersinking and plugging some screw holes on a step stool, links for all items used are below. I started off cutting some tapered plugs out of cherry using the Amana Tool Timberline 607-310 3/8" tapered plug cutter.

I then cut those free on the bandsaw. After adjusting the countersink depth to cut a deep pocket I used the 55227 No-Mar carbide tipped adjustable depth countersink to make the pocket for the plugs.

The screws were driven in and plugs were glued with Titebond 2 wood glue and hammered in. I then used the PLP-100 Carbide Tipped non-marring plug planer to trim the plugs flush with the surface. A quick hit with some 150 grit sand paper and they are ready to go! This really saves time and eliminates the issue of flush trim saw marks anywhere else on the piece!

Check out the tools used on our website:

The plans for this project are also available on our website -
toolstoday.com/step-tool-cnc-plans.html

Timberline 607-310 Tapered Wood Plug Cutter 3/8 D x 3/8 SHK
toolstoday.com/v-8258-607-310.html

Amana Tool 55227 Carbide Tipped Countersink with No Burning and No Marring Adjustable Depth Stop with No-Thrust BB, 3/8 D x 1/8 Drill D x 1/4 Inch Quick Release Hex SHK
toolstoday.com/v-11618-55227.html

Amana Tool PLP-100 Carbide Tipped Non-Marring Plug Planer 2-Inch D x 15mm Drill D x 1/4 Inch Quick Release Hex SHK
toolstoday.com/v-11621-plp-100.html

Titebond II Premium Wood Glue
toolstoday.com/v-15081-tb-5004.html

#short #shorts

** Subscribe - youtube.com/user/toolstoday

** Shop the website - toolstoday.com

** Like at Facebook - tinyurl.com/toolstoday-facebook

** Follow on Instagram - instagram.com/toolstoday
Plugging Screw Hole LocationsCosscuts Made Easy and Accurate22.5 vs. 45 vs. 60 Chamfer Router Bits Whats the DifferenceCNC Plasma Cutting SteelSelf Aligning Glue Joint on Router TableCutting and Building a CabinetThis Workbench Top Can Clamp Almost AnythingOne Pass 60° Chamfer EdgeMaking a Jointing Jig With a Router Guide SystemFloating Overarm Dust Collection for SawStopFlush Trimming with a TwistThis Vacuum Clamp Is Stronger Than I Expected
ToolsToday |

Plugging Screw Hole Locations

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER