Floating Overarm Dust Collection for SawStop @ToolsToday
Floating Overarm Dust Collection for SawStop  @ToolsToday
Uploaded June 2026 | Updated November 2026, 1 day ago
This floating over-arm dust collection system is the perfect solution removing table-top dust. While unpacking I was impressed with how heavy duty this system is. This is NOT lightweight plastic or PVC that you are going to worry about breaking, this is steel baby! The Mounting bracket and extension leg are also made from heavy-duty steel that bolts directly to your extension table. The only bit of dust left is what you see at the end of the cut. What an improvement! Check out the tools used on our website -

SawStop Floating Overarm Dust Collection Guard - toolstoday.com/sawstop-tsg-fdc-floating-overarm-dust-collection-guard.html

SawStop 5HP ICS with 52” Fence - toolstoday.com/sawstop-ics51230-52-5hp-1ph-230v-60hz-industrial-cabinet-saw-with-52-industrial-t-glide-fence-system.html

Amana Tool 80T Carbide Tipped Fine Cut - toolstoday.com/v-7156-610801.html

Wera Joker Self-Setting Wrench - toolstoday.com/wera-05020110001-6004-joker-4-set-1-self-setting-spanner-set-4-pieces.html

Festool Brad Point Drill Bit Set - toolstoday.com/festool-577483-brad-point-drill-bit-set-bks-d-1-8-inch-1-2-inch-ce-w-7.html

Wera 8100 Zyklop Speed Ratchet Set, 1/2 Inch Drive - toolstoday.com/wera-05003645001-8100-sc-2-zyklop-speed-ratchet-set-1-2-inch-drive-metric-37-pieces.html

Wera SA6 Zyklop Speed Ratchet Set, 1/4 Inch Drive - toolstoday.com/wera-05004016001-8100-sa-6-zyklop-speed-ratchet-set-1-4-inch-drive-metric-28-pieces.html

Wera 334/6 Rack Screwdriver Set - toolstoday.com/wera-05105650001-334-6-rack-screwdriver-set-kraftform-plus-lasertip-and-rack-6-pieces.html

#short #shorts

** Subscribe - youtube.com/user/toolstoday

** Shop the website - toolstoday.com

** Like at Facebook - tinyurl.com/toolstoday-facebook

** Follow on Instagram - instagram.com/toolstoday
Floating Overarm Dust Collection for SawStopFlush Trimming with a TwistThis Vacuum Clamp Is Stronger Than I ExpectedCarving a Logo on CNCCarving Logo on Round StockBuilding Cornhole Boards from Start to FinishPerfect Fitting Joinery with the PantoRouterFinishing the Cornhole Board ProjectReorganize Your Shop Without Rebuilding the WallClean Text Pockets on CNCMaking Professional HDPE Signs on a CNC Router | ToolsTodayQuick Benchtop Router Table Setup
ToolsToday |

Floating Overarm Dust Collection for SawStop

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER