Uploaded June 2026 | Updated November 2026, 1 day ago
Watching this HDPE cut this clean never gets old!
toolstoday.com/?utm_source=youtube&utm_medium=referral&utm_campaign=youtube_HDPE-signs
Watching the green outer layer of the ColorCore HDPE peel away and reveal the white core underneath never gets old. The chips fly clean, the edges come out crisp, and it almost looks like the CNC is drawing instead of cutting.
Definitely one of my favorite materials to machine lately. Check out the tools used available on our website, items used are listed below!
After cutting these HDPE garden signs, I trimmed the tabs, flush trimmed the edges on the router table, and added a small roundover to soften everything up. The rounded edges make a huge difference on HDPE since the material can leave some surprisingly sharp corners after machining. Really clean finish using standard woodworking router bits on plastic. Check out the tools used to make these available on our wesbite!
Amana Tool 90° Insert Carbide V-Groove Bit, item no. RC-45711
toolstoday.com/v-10600-rc-45711.html
RPM: 14,000
Feed Rate: 40ipm
Plunge Rate: 40ipm
Amana Tool 1/4" Upcut Spiral O Flute, item no. 51404-K
toolstoday.com/v-13351-51404-k.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 100ipm
Depth Per Pass : .25"
Amana Tool 1/2" carbide insert flush trim bit, item no. RC-47104
toolstoday.com/v-9818-rc-47104.html
Amana Tool 1/16" radius roundover bit, item no. 49492
toolstoday.com/v-5846-49492.html
Carbide 3D Shapeoko 5 Pro CNC, item no. S5
toolstoday.com/carbide-3d-shapeoko-5-pro-cnc-router-machine.html
Vectric V-Carve Pro Software, item no. AVC308-2
toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html
Carbide 3D Crush-It Essentials Clamps, item no. C3D-CRUSHIT-ESSENTIALS
toolstoday.com/carbide-3d-crush-it-essential-clamp-set
Fein ASCM 18-4 QMP AS High Torque 4-SPD Hammer Drill/Driver Set 71161562090
toolstoday.com/fein-ascm-18-4-qmp-as-high-torque-4-spd-hammer-drill-driver-set-71161562090
SawStop Inline Router Table, item no. RT-TGP
toolstoday.com/sawstop-rt-tgp-27-in-line-cast-iron-router-table-for-pcs-and-cns.html
0:00 Introduction
0:18 CNC V Groove
2:03 Drilling
2:41 CNC Spiral Bit
3:33 Sign Removal from Machine
3:47 Flush Trimming
5:18 Final Sign
Watching this HDPE cut this clean never gets old!
toolstoday.com/?utm_source=youtube&utm_medium=referral&utm_campaign=youtube_HDPE-signs
Watching the green outer layer of the ColorCore HDPE peel away and reveal the white core underneath never gets old. The chips fly clean, the edges come out crisp, and it almost looks like the CNC is drawing instead of cutting.
Definitely one of my favorite materials to machine lately. Check out the tools used available on our website, items used are listed below!
After cutting these HDPE garden signs, I trimmed the tabs, flush trimmed the edges on the router table, and added a small roundover to soften everything up. The rounded edges make a huge difference on HDPE since the material can leave some surprisingly sharp corners after machining. Really clean finish using standard woodworking router bits on plastic. Check out the tools used to make these available on our wesbite!
Amana Tool 90° Insert Carbide V-Groove Bit, item no. RC-45711
toolstoday.com/v-10600-rc-45711.html
RPM: 14,000
Feed Rate: 40ipm
Plunge Rate: 40ipm
Amana Tool 1/4" Upcut Spiral O Flute, item no. 51404-K
toolstoday.com/v-13351-51404-k.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 100ipm
Depth Per Pass : .25"
Amana Tool 1/2" carbide insert flush trim bit, item no. RC-47104
toolstoday.com/v-9818-rc-47104.html
Amana Tool 1/16" radius roundover bit, item no. 49492
toolstoday.com/v-5846-49492.html
Carbide 3D Shapeoko 5 Pro CNC, item no. S5
toolstoday.com/carbide-3d-shapeoko-5-pro-cnc-router-machine.html
Vectric V-Carve Pro Software, item no. AVC308-2
toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html
Carbide 3D Crush-It Essentials Clamps, item no. C3D-CRUSHIT-ESSENTIALS
toolstoday.com/carbide-3d-crush-it-essential-clamp-set
Fein ASCM 18-4 QMP AS High Torque 4-SPD Hammer Drill/Driver Set 71161562090
toolstoday.com/fein-ascm-18-4-qmp-as-high-torque-4-spd-hammer-drill-driver-set-71161562090
SawStop Inline Router Table, item no. RT-TGP
toolstoday.com/sawstop-rt-tgp-27-in-line-cast-iron-router-table-for-pcs-and-cns.html
0:00 Introduction
0:18 CNC V Groove
2:03 Drilling
2:41 CNC Spiral Bit
3:33 Sign Removal from Machine
3:47 Flush Trimming
5:18 Final Sign










