Uploaded October 2026 | Updated November 2026, 2 days ago
Cutting red embossed leather on the CNC using a Donek D4 Drag Knife. This was a material test for a customer, and the drag knife cut through the leather incredibly cleanly without tearing up the embossed surface.
Unlike a router bit, the spindle stays off for this cut. The blade follows the CNC toolpath and rotates as the machine changes direction, making it a really useful option for leather and other materials you would normally cut with a utility knife. Check out the tools used on our website -
Donek Tools D4 Drag Knife, item no. D4 - toolstoday.com/donek-tools-d4-drag-knife-1-4-shk-x-1-4-ch.html
Drag Knife Settings
Spindle: Off
Feed Rate: 60ipm
Plunge Rate: 30ipm
Stepcraft M.1400 CNC Machine, item no. stepcraft_M1400 - toolstoday.com/stepcraft-m-1400-48-x-64-cnc-machine.html
Black Box Storm Vacuum, item no. BBV-SVP-2 - toolstoday.com/black-box-vac-bbv-svp-2-storm-vacuum-system-for-cnc-routers-single-phase-220v-230v-at30-amps-2-long-life-high-performance-motors-inline-filter-not-included-but-recommended.html
Vectric VCarve Pro Software, item no. AVC308-2 - toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html
#short #shorts
Cutting red embossed leather on the CNC using a Donek D4 Drag Knife. This was a material test for a customer, and the drag knife cut through the leather incredibly cleanly without tearing up the embossed surface.
Unlike a router bit, the spindle stays off for this cut. The blade follows the CNC toolpath and rotates as the machine changes direction, making it a really useful option for leather and other materials you would normally cut with a utility knife. Check out the tools used on our website -
Donek Tools D4 Drag Knife, item no. D4 - toolstoday.com/donek-tools-d4-drag-knife-1-4-shk-x-1-4-ch.html
Drag Knife Settings
Spindle: Off
Feed Rate: 60ipm
Plunge Rate: 30ipm
Stepcraft M.1400 CNC Machine, item no. stepcraft_M1400 - toolstoday.com/stepcraft-m-1400-48-x-64-cnc-machine.html
Black Box Storm Vacuum, item no. BBV-SVP-2 - toolstoday.com/black-box-vac-bbv-svp-2-storm-vacuum-system-for-cnc-routers-single-phase-220v-230v-at30-amps-2-long-life-high-performance-motors-inline-filter-not-included-but-recommended.html
Vectric VCarve Pro Software, item no. AVC308-2 - toolstoday.com/vcarve-pro-10-0-software-for-cnc-1.html
#short #shorts










