hdydiy | Playing with Loose Addressable LEDs @hdydiy | Uploaded December 2019 | Updated October 2024, 2 hours ago.
Just a quick video showing me experimenting with some addressable LEDs, not attached to an LED strip.

Also, don't forget to check out my main channel: youtube.com/HowDoYouDIY

▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽

-----

▽ Here is what I used:

Tools
-----
Soldering Iron (amzn.to/2oK9Xrh)

Supplies
-----
Lead-Free Solder (amzn.to/2GD3asQ)
Lead-Based Solder (amzn.to/3z49TS6)
Solder Flux (amzn.to/2QCyV7Z)

Parts
-----
Arduino Nano (amzn.to/32ZofTl)
Touch Sensors (amzn.to/2rSJxoS)
Wire (amzn.to/2OnshRK)
LED Wire Connectors (amzn.to/2wICn6r)
Addressable LEDs (amzn.to/3uVk7ST)
104 Capacitors (amzn.to/2LBDoo4)
LED 5v Power Supply (amzn.to/2Q61IPx)
Barrel Plug (amzn.to/2WOLNHL)

-----

▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Main Channel - youtube.com/HowDoYouDIY

-----

▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY

-----

▽ Music:
Music promoted by Audio Library
Music: Jazz In Paris - Media Right Productions youtu.be/mNLJMTRvyj8