Uploaded September 2023 | Updated September 2026, 2 weeks ago
In this video we take time to compare 2 different Plastic Trim Restorers. The Rust-Oleum Wipe New and the Plastic Restorer. I was trying to put the Wipe New up against a similar product to Cerakote, but ended up comparing to a much more inferior ceramic coating product. The Plastic Trim restorer did not perform nearly as well as the Cerakote showed previously in other comparisons such as Project Farms. Hope you found the video informational and at least know which product to avoid. Let me know in the comments if you would like a 6 month update on this. Also let me know if you would like to see other comparisons. These were purchased from Amazon as seen in the screen shots in the video.
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Rust-Oleum Wipe New if interested: amzn.to/3PBXKPu
* Peformed very well, They need to work on the packaging for sure
Cerakote if interested: amzn.to/3PiRvyE
*This product performed well for Todd on Project Farm
Plastic Restore if interested: amzn.to/3LlqGIY
* I would personally avoid this product
Cliff Quick Test Tester if needed: amzn.to/3Leff5W
Peak ESR70 Cap Tester if needed: amzn.to/44OGnPH
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Cheap Hot Tweezer set if needed: amzn.to/3sKc8fH
Jumpers - DuPont Ribbon type if needed: amzn.to/3RfWanE
Rosin Flux if needed: amzn.to/45KKWLT
Bottle for Flux if needed: amzn.to/3sv0x45
150W Load Tester if needed: amzn.to/30i8sn8
Weller 200W Iron if needed: amzn.to/30nzhT2
LiPo Voltage Monitor/Alarm if needed: amzn.to/3OxLJKy
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
JST-XH Connector kit if needed: amzn.to/3OgW1yg
JST-XH Pre-made extensions if needed: amzn.to/3OhMlE1
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF Board holder with 5 strong magnets if needed:
northridgefix.com/product/northridgefix-pcb-board-holder-with-5-strong-magnets/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
In this video we take time to compare 2 different Plastic Trim Restorers. The Rust-Oleum Wipe New and the Plastic Restorer. I was trying to put the Wipe New up against a similar product to Cerakote, but ended up comparing to a much more inferior ceramic coating product. The Plastic Trim restorer did not perform nearly as well as the Cerakote showed previously in other comparisons such as Project Farms. Hope you found the video informational and at least know which product to avoid. Let me know in the comments if you would like a 6 month update on this. Also let me know if you would like to see other comparisons. These were purchased from Amazon as seen in the screen shots in the video.
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
Rust-Oleum Wipe New if interested: amzn.to/3PBXKPu
* Peformed very well, They need to work on the packaging for sure
Cerakote if interested: amzn.to/3PiRvyE
*This product performed well for Todd on Project Farm
Plastic Restore if interested: amzn.to/3LlqGIY
* I would personally avoid this product
Cliff Quick Test Tester if needed: amzn.to/3Leff5W
Peak ESR70 Cap Tester if needed: amzn.to/44OGnPH
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Cheap Hot Tweezer set if needed: amzn.to/3sKc8fH
Jumpers - DuPont Ribbon type if needed: amzn.to/3RfWanE
Rosin Flux if needed: amzn.to/45KKWLT
Bottle for Flux if needed: amzn.to/3sv0x45
150W Load Tester if needed: amzn.to/30i8sn8
Weller 200W Iron if needed: amzn.to/30nzhT2
LiPo Voltage Monitor/Alarm if needed: amzn.to/3OxLJKy
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
JST-XH Connector kit if needed: amzn.to/3OgW1yg
JST-XH Pre-made extensions if needed: amzn.to/3OhMlE1
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
GM328 if needed: amzn.to/30rBFrJ
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix.com/product/amtech-nc-559-v2-tf-flux-10ml-syringe-plunger-2-needle-sizes/?ref=thriftytoolshed
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix.com/product/low-melt-solder-pack-of-6-sticks/?ref=thriftytoolshed
NF Premium Desolder Braid Wick if needed:
northridgefix.com/product/premium-desolder-braid-wick-10ft-length/?ref=thriftytoolshed
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix.com/product/dual-head-esd-safe-hard-cleaning-brush-for-circuit-boards-and-corrosion-removal/?ref=thriftytoolshed
NF Mechanic Tweezers if needed:
northridgefix.com/product/mechanic-diamond-high-precision-tweezer-non-stick-carbon-coating/?ref=thriftytoolshed
Solder wire 100g 60/40 if needed:
northridgefix.com/product/best-solder-wire-roll-100g-choose-from-0-3mm-and-0-8mm/?ref=thriftytoolshed
NF.Mini Soldering Pen if needed:
northridgefix.com/product/portable-nf-mini-soldering-pen/?ref=thriftytoolshed
NF Board holder with 5 strong magnets if needed:
northridgefix.com/product/northridgefix-pcb-board-holder-with-5-strong-magnets/?ref=thriftytoolshed
NF Universal Board Holder if needed:
northridgefix.com/product/universal-pcb-board-holder-fully-adjustable-jig-fixture/?ref=thriftytoolshed
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix.com/product/hepa-fume-extractor-smoke-absorber-purifier-nf-fume/?ref=thriftytoolshed
NF Atten ST-862D Hot Air Station if needed:
northridgefix.com/product/atten-st-862d-hot-air-station-with-4-nozzles/?ref=thriftytoolshed
NF Grinding Pen with 7 tips if needed:
northridgefix.com/product/grinding-pen-for-traces-repair-chip-grind-cut-hole-7-tips-battery-operated/?ref=thriftytoolshed
UNI-T UTI260B Thermal Camera if needed:
northridgefix.com/product/uni-t-uti260b-thermal-imager-camera-256px-x-192px/?ref=thriftytoolshed
