Uploaded April 2026 | Updated September 2026, 8 hours ago
I'd never touched a plasma cutter in my life. YesWelder sent me the CUT-65DS Plus — so naturally, I started on scrap metal and ended up cutting into the 1964 Chevelle by the end of the day.
This is a full first-timer review and real-world demo of the YesWelder CUT-65DS Plus plasma cutter — out-of-the-box setup, first cuts on sheet metal, 1/8" and 1/4" plate, marking mode, practice cuts, and a real project on the Chevelle's core support. No experience required, apparently.
If you've been thinking about adding a plasma cutter to your shop, or you're specifically looking at the YesWelder CUT-65DS Plus, this is an honest look from someone who had absolutely zero plasma cutting experience before hitting record.
🚗 The Build Context:
This is the 1964 Chevelle — Paige's car, my headache, and the ongoing hot rod project that refuses to let me sleep. Plasma cutting sheet metal on a classic car sounds intimidating, but using a plasma cutter for the first time doesn't have to be. This video proves it.
If you're doing any kind of classic car rebuild, rust repair, or DIY fabrication work and you've been on the fence about adding a plasma cutter to the shop — this is your sign.
🔗 YesWelder CUT-65DS Plus:
Amazon 🔗: amzn.to/4lUjqVs
YesWelder 🔗: yeswelder.com/collections/plasma-cutter/products/plasma-cutters-cut-65ds?ref=uzixkppa
🔥 YesWelder CUT-65DS Plus — What You Need to Know:
Pilot arc technology — starts a cut without direct contact (game changer for rusty or painted surfaces)
Clean, controlled cuts on sheet metal, tubing, and plate
Built for the DIY guy AND the professional — this is the best plasma cutter for getting work done without a learning curve
Handles the kind of classic car rebuild work most budget cutters choke on
Compact enough for the home garage, powerful enough for real hot rod restoration
📢 LINKS & GEAR 📢
👕 OneMoreBolt Merch → OneMoreBolt.Printful.me
Amazon Links are Affiliate links and I may earn a commission.
#YesWelder #PlasmaCutter #1964Chevelle #PlasmaCAutterReview #HotRod #ClassicCar #DIY #Welding #Fabrication #YesWelderReview #BudgetPlasmaCutter #PlasmaCAutterForBeginners
I'd never touched a plasma cutter in my life. YesWelder sent me the CUT-65DS Plus — so naturally, I started on scrap metal and ended up cutting into the 1964 Chevelle by the end of the day.
This is a full first-timer review and real-world demo of the YesWelder CUT-65DS Plus plasma cutter — out-of-the-box setup, first cuts on sheet metal, 1/8" and 1/4" plate, marking mode, practice cuts, and a real project on the Chevelle's core support. No experience required, apparently.
If you've been thinking about adding a plasma cutter to your shop, or you're specifically looking at the YesWelder CUT-65DS Plus, this is an honest look from someone who had absolutely zero plasma cutting experience before hitting record.
🚗 The Build Context:
This is the 1964 Chevelle — Paige's car, my headache, and the ongoing hot rod project that refuses to let me sleep. Plasma cutting sheet metal on a classic car sounds intimidating, but using a plasma cutter for the first time doesn't have to be. This video proves it.
If you're doing any kind of classic car rebuild, rust repair, or DIY fabrication work and you've been on the fence about adding a plasma cutter to the shop — this is your sign.
🔗 YesWelder CUT-65DS Plus:
Amazon 🔗: amzn.to/4lUjqVs
YesWelder 🔗: yeswelder.com/collections/plasma-cutter/products/plasma-cutters-cut-65ds?ref=uzixkppa
🔥 YesWelder CUT-65DS Plus — What You Need to Know:
Pilot arc technology — starts a cut without direct contact (game changer for rusty or painted surfaces)
Clean, controlled cuts on sheet metal, tubing, and plate
Built for the DIY guy AND the professional — this is the best plasma cutter for getting work done without a learning curve
Handles the kind of classic car rebuild work most budget cutters choke on
Compact enough for the home garage, powerful enough for real hot rod restoration
📢 LINKS & GEAR 📢
👕 OneMoreBolt Merch → OneMoreBolt.Printful.me
Amazon Links are Affiliate links and I may earn a commission.
#YesWelder #PlasmaCutter #1964Chevelle #PlasmaCAutterReview #HotRod #ClassicCar #DIY #Welding #Fabrication #YesWelderReview #BudgetPlasmaCutter #PlasmaCAutterForBeginners
