Uploaded February 2019 | Updated November 2026, 2 hours ago
How to start Pitts S1 "Spinner3" with its fuel injected 12.5:1 compression engine:
1. Check mixture rich
2. Throttle wide open
3. Prime fuel with 2 strokes on the wobble pump
4. Throttle cracked open
5. Mixture leaned to idle setting
6. Master swtich on
7. Mag and EIS on
8. Hand on throttle then push start button
9. Adjust throttle to 900 rpm idle
10. Avionics master switch on
How to start Pitts S1 "Spinner3" with its fuel injected 12.5:1 compression engine:
1. Check mixture rich
2. Throttle wide open
3. Prime fuel with 2 strokes on the wobble pump
4. Throttle cracked open
5. Mixture leaned to idle setting
6. Master swtich on
7. Mag and EIS on
8. Hand on throttle then push start button
9. Adjust throttle to 900 rpm idle
10. Avionics master switch on










