Uploaded June 2016 | Updated November 2026, 2 hours ago
The Dutch roll is an eye-hand coordination maneuver taught to pilots to help them improve their "stick-and-rudder" technique. The aircraft is alternately rolled as much as 60 degrees left and right while rudder is applied to keep the nose of the aircraft locked on a fixed point. More correctly, this is an aileron-rudder un-coordination practice exercise, to teach a pilot how to correct for the effect known as adverse aileron yaw during roll inputs.
This technique is also referred to as "rolling on a heading", wherein the aircraft is rolled in such a way as to maintain an accurate heading without the nose moving from side-to-side (or yawing). The yaw motion is induced through the use of ailerons alone due to induced drag, wherein the lifting wing (aileron down) is doing more work than the descending wing (aileron up) and therefore creates more drag, forcing the lifting wing back, yawing the aircraft toward it. This yawing effect produced by rolling motion is known as adverse yaw. This has to be countered precisely by application of rudder in the same direction as the aileron control (left stick, left rudder - right stick, right rudder). This is known as synchronized control input when done properly, and is difficult to learn and apply well. The correct amount of rudder to apply with aileron is different for each aircraft.
The Dutch roll is an eye-hand coordination maneuver taught to pilots to help them improve their "stick-and-rudder" technique. The aircraft is alternately rolled as much as 60 degrees left and right while rudder is applied to keep the nose of the aircraft locked on a fixed point. More correctly, this is an aileron-rudder un-coordination practice exercise, to teach a pilot how to correct for the effect known as adverse aileron yaw during roll inputs.
This technique is also referred to as "rolling on a heading", wherein the aircraft is rolled in such a way as to maintain an accurate heading without the nose moving from side-to-side (or yawing). The yaw motion is induced through the use of ailerons alone due to induced drag, wherein the lifting wing (aileron down) is doing more work than the descending wing (aileron up) and therefore creates more drag, forcing the lifting wing back, yawing the aircraft toward it. This yawing effect produced by rolling motion is known as adverse yaw. This has to be countered precisely by application of rudder in the same direction as the aileron control (left stick, left rudder - right stick, right rudder). This is known as synchronized control input when done properly, and is difficult to learn and apply well. The correct amount of rudder to apply with aileron is different for each aircraft.










