Photron AX200 MiniCam high speed camera setup introduction - part 1 camera setup @firesciencetoolscom
Photron AX200 MiniCam high speed camera setup introduction - part 1 camera setup  @firesciencetoolscom
Uploaded May 2018 | Updated September 2026, 2 weeks ago
Demonstration of recording spark generator.

Disclaimer
The information presented is for educational purposes only and is believed to be accurate and reliable. No warranty, expressed or implied, is offered as to the accuracy of the information. Neither the author, nor the publishers assume any responsibility for the use of the information contained herein. This information must not be used solely for life or property safety/protection purposes. The user is obligated to obtain professional guidance for any decisions affecting the safety of people or property. {Referenced: Ignition Handbook by Babrauskas 2013}


Disclaimer: Combustion experiments are dangerous and could result in injury to yourself or others, and/or damage to property. These experiments were conducted in a laboratory environment by trained personnel. Do not attempt these experiments without proper training, equipment, and laboratory. Do not attempt at home. These videos are meant to show the combustion phenomenon and are not intended as a guide for reproducing the effects. Do not play with fire or combustion phenomena.
Photron AX200 MiniCam high speed camera setup introduction - part 1 camera setupCFAST Fire model example -  part 2 disappearing ventsmagnesium ribbon ignition - virtual laboratoryEffective ignition time - virtual laboratoryLaser camera trigger for high speed shadowgraph - ~10 microsecond light pulseInitiation of flashover on couch inside compartment fire - visual and thermal imaging cameraBenefit of thermal imaging camera to see inside compartment fire - Dual optical and TIC videoCandle smoke columb  reignition with flame and ruler v01Laser Doppler Anemometer LDA setup descriptionExtinguishing a 4ft kerosene fire with dry ice on meshExtinguishing a 4ft kerosene fire with dry ice on mesh - not enough dry iceRandom Number Generator 0-100 - 4hz
firesciencetools .com |

Photron AX200 MiniCam high speed camera setup introduction - part 1 camera setup

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER