Uploaded November 2017 | Updated September 2026, 8 hours ago

---

Here is the guide to modifying flight parameters on your phantom 3. This is more involved, but its a straight forward process. Credit to the guys who made the tools and shared the knowledge.

WE CAN DO THIS ON ANY VERSION, NO NEED TO ROLLBACK ANYMORE!

IF you get crypto error, goto command prompt and type "After Python was installed, goto command prompt and type "python -m pip install pycryptodome" (without quotes), Press Enter, let it download/Install. It will fix it.


** Links
Github: github.com/mefistotelis/phantom-firmware-tools
Firmware Spreadsheet: github.com/mefistotelis/phantom-firmware-tools/blob/master/supported_firmwares.csv
p3a V01.07.0060 FW: dl.djicdn.com/downloads/phantom_3/P3S_FW_V01.07.0060.zip
p3p V01.07.0060 fw: dl.djicdn.com/downloads/phantom_3/P3X_FW_V01.07.0060.zip
p3 standard V01.07.0084: s3-ap-northeast-1.amazonaws.com/dji-firmware-test/P3C/P3C_FW_V01.07.0084.bin

** Python script file download links
dji_flyc_param_ed.py: github.com/mefistotelis/phantom-firmware-tools/raw/master/dji_flyc_param_ed.py
dji_fwcon.py: github.com/mefistotelis/phantom-firmware-tools/raw/master/dji_fwcon.py
Python Download: python.org/downloads

** Commands to run
Extract FW: dji_fwcon.py -vv -x -p P3X_FW_V01.07.0060.bin
Extract FC Module: dji_flyc_param_ed.py -vv -x -m P3X_FW_V01.07.0060_m0306.bin
Re-pack FW: dji_flyc_param_ed.py -vv -u -m P3X_FW_V01.07.0060_m0306.bin

** Filename to rename: PMCAPPFw3.bin

IF YOU NEED HELP DOWNGRADING FIRMWARE GO HERE: phantompilots.com/threads/downgrading-firmware-on-p3p-from-1-10-9-to-1-7-6.105384