Peugeot 206 1.1 idle speed too high @peugeotCitroen2CV
Peugeot 206 1.1 idle speed too high  @peugeotCitroen2CV
Uploaded August 2018 | Updated November 2026, 2 days ago
*** Problem has been fixed watch this video:
youtube.com/watch?v=vKAnFQ-S6hk&t=3s&frags=pl%2Cwn
***

A 2005 Peugeot 206 1.1 with an idle speed that is too high.

I replaced the engine recently but made sure to swap over all of the sensors and running parts from the original engine.

I have checked the inlet manifold gaskets they are all sealing well

The brake servo hose is connected and has no leaks

I have removed the idle control valve, extended the pin fully and reinstalled it but the car pulls the pin back as soon as it is connected up. I've also tried another 3 throttle bodies, all are doing the same thing.

The revs are just as high with the air filter ducting in place or removed.

Plugging the car onto a laptop running peugeot planet no error codes are coming up and all of the parameter measurements seem to be fine.

Any suggestions as to what could be the problem would be appreciated.
Peugeot 206 1.1 idle speed too highRenault Kadjar Door handle keyless entry button replacementCitroen Berlingo Battery ReplacementMazda 6 with Electric Parking Brake - Rear Brake Disks & Pads ReplacementRenault/Nissan/Dacia 1.5 DCI K9K Cambelt Replacement - Fast VersionPeugeot 407 Rear Brakes & Central Console RemovalCitroen Xsara front wishbone bush replacement205 Sunroof frame removalJaguar XF 2.2 (DW12) Timing Belt and Water Pump ReplacementRenault Avantime Disassembly Part 2PSA 1.2 EB2DT HNZ Puretech Engine Full DisassemblySub £500 Peugeot 607s
peugeotCitroen2CV |

Peugeot 206 1.1 idle speed too high

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER