205 Sunroof frame removal @peugeotCitroen2CV
205 Sunroof frame removal  @peugeotCitroen2CV
Uploaded April 2020 | Updated November 2026, 1 day ago
The process of removing a sliding sunroof mechanism fitted to a Peugeot 205, the same mechanism was also fitted to the 309.
This job was done to inspect some rust bubbles on the roof skin of this 205, there seems to have been a bit of a bodge where someone in the past just cut out the rust on the roof and then put the sunroof frame back over it and sealed it with household silicone.
Household silicone being a terrible product to use for this purpose as it eventually looses its grip and makes the rust worse. Polyurethane windscreen sealant may have gave it a better chance.

Conveneiently i managed to get hold of a full 205 roof with sunroof frame through a member of the 205 owners club facebook page. Delivery was an interesting route (In January 2020) with the roof going to a scrap collector a friend knows, then getting picked up by a cousin who had bought a lorry back from England to Northern Ireland.

Tools used in this Video:
Trim Pry Tool Set: amzn.to/2xlcGwi
Torx Screwdriver Set: amzn.to/2u1zE9B
Pliers Set: amzn.to/2QtGYT2
1/4" Socket Set: amzn.to/37hvQzh
Trim removal pliers: amzn.to/2VaKOUJ

Equipment used to make video:
GoPro: amzn.to/2SBe9H4
Main Camera: amzn.to/2skwuxl
SD Card: amzn.to/39m2xNM
Computer: amzn.to/39lIXl2

Follow the peugeotcitroen2cv Facebook page: facebook.com/Peugeotcitroen2cv
205 Sunroof frame removalJaguar XF 2.2 (DW12) Timing Belt and Water Pump ReplacementRenault Avantime Disassembly Part 2PSA 1.2 EB2DT HNZ Puretech Engine Full DisassemblySub £500 Peugeot 607sCitroen Xsara front brake servicePeugeot 307 1.6 HDi Driveshaft oil seal and CV boot replacementToyota Avensis Full Brakes ServiceCitroen Berlingo Rear Sliding Door RemovalCitroen Berlingo front seatbelt removalPeugeot 407 Quick ServicePeugeot 607 Convertible
peugeotCitroen2CV |

205 Sunroof frame removal

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER