element14 presents | PCB Prototype Design Tips and Tricks - Workbench Wednesdays @element14presents | Uploaded 2 years ago | Updated 1 day ago
James is most likely to answer questions and comments here: bit.ly/3vdRlj6
There's lots more info on PCB Prototyping and Design here: bit.ly/3OFGt4j
No matter how many printed circuit boards you design, the first version of a board will always need to be tested and debugged. In this episode, Bald Engineer shares four tips for PCB design that he's gathered from his experience of creating almost 100 PCBs. With these, you'll track your board revisions more easily, keep notes of individual boards, and make testing with a scope or digital multimeter much faster!
The entire element14 presents team can be found here: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware: bit.ly/3q6YMpu
#0:00 Welcome to Workbench Wednesdays
#0:48 Peel Back the Mask
#1:41 GND Marks the Spot
#2:27 Tidy Silkscreen
#4:00 Test Points
#5:32 Give your Feedback
#pcbdesign #printedcircuitboard #debugging #prototyping #pcb
James is most likely to answer questions and comments here: bit.ly/3vdRlj6
There's lots more info on PCB Prototyping and Design here: bit.ly/3OFGt4j
No matter how many printed circuit boards you design, the first version of a board will always need to be tested and debugged. In this episode, Bald Engineer shares four tips for PCB design that he's gathered from his experience of creating almost 100 PCBs. With these, you'll track your board revisions more easily, keep notes of individual boards, and make testing with a scope or digital multimeter much faster!
The entire element14 presents team can be found here: bit.ly/3tmdewv
Visit the element14 Community for more great activities and free hardware: bit.ly/3q6YMpu
#0:00 Welcome to Workbench Wednesdays
#0:48 Peel Back the Mask
#1:41 GND Marks the Spot
#2:27 Tidy Silkscreen
#4:00 Test Points
#5:32 Give your Feedback
#pcbdesign #printedcircuitboard #debugging #prototyping #pcb