Uploaded September 2019 | Updated September 2026, 2 weeks ago
Patterns and Knurling in Fusion 360 for 3D Printing // By the end of this video, you’ll know how to create knurling in Fusion 360. We’ll also take a look at two other ways to create patterns around a cylinder or curved surface.
TIMESTAMPS
00:48 | Setting up user parameters
01:21 | Creating a new component
02:12 | Creating an offset construction plane
02:30 | Using the coil command
04:46 | Mirroring the coil results
05:12 | Circular pattern the coil and mirror features
05:53 | Adding a chamfer to the end of the cylinder
06:43 | Adjusting the look of the knurling pattern
08:00 | Creating a new cylinder for pattern example
08:52 | Sketching fit point spline curvature
09:36 | Projecting the spline to the cylinder surface
10:50 | Cutting out the path with the loft command
11:59 | Circular pattern the loft and fillet features
14:00 | Creating a dot pattern on a cylinder
14:57 | Rectangular pattern the dot
15:37 | Circular pattern the dots
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com/17
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline #3dPrinting
Patterns and Knurling in Fusion 360 for 3D Printing // By the end of this video, you’ll know how to create knurling in Fusion 360. We’ll also take a look at two other ways to create patterns around a cylinder or curved surface.
TIMESTAMPS
00:48 | Setting up user parameters
01:21 | Creating a new component
02:12 | Creating an offset construction plane
02:30 | Using the coil command
04:46 | Mirroring the coil results
05:12 | Circular pattern the coil and mirror features
05:53 | Adding a chamfer to the end of the cylinder
06:43 | Adjusting the look of the knurling pattern
08:00 | Creating a new cylinder for pattern example
08:52 | Sketching fit point spline curvature
09:36 | Projecting the spline to the cylinder surface
10:50 | Cutting out the path with the loft command
11:59 | Circular pattern the loft and fillet features
14:00 | Creating a dot pattern on a cylinder
14:57 | Rectangular pattern the dot
15:37 | Circular pattern the dots
TUTORIAL RESOURCES
1. This tutorial's resource page ➞ ProductDesignOnline.com/17
2. View my checklists for Fusion 360 beginners ➞ bit.ly/f360checklist
3. Join us on Patreon ➞ patreon.com/productdesignonline
TOP FUSION 360 PLAYLISTS
bit.ly/learn-fusion360
bit.ly/woodworker-playlist
bit.ly/3D-printing-playlist
bit.ly/sculpt-playlist
SUBSCRIBE for more high-quality Fusion 360 tutorials! ➞ bit.ly/sub-right-now
________________________________
MY PREMIUM COURSES
2 Months FREE ➞ bit.ly/courses-free
DISCLAIMER
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps you support the channel at no extra cost to you and allows me to continue to make videos like this.
—
#Fusion360 #ProductDesignOnline #3dPrinting
