Product Design Online | Fusion 360: Print-in-place project for beginners @ProductDesignOnline | Uploaded 3 years ago | Updated 14 hours ago
Grab the free file: bit.ly/gyroscopicSTL
Shoutout to Thangs.com for sponsoring the September 3D modeling challenge. Up for a challenge? ➞ bit.ly/Sept3DChallenge
Print-in-place 3D prints are super fun! Learn how to design a gyroscopic keychain in Autodesk Fusion 360, using only two commands!
This design includes two user parameters that drive the thickness and clearance of the design.
TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/challenge
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo
TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist
KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp
_______________________
JOIN THE PDO COMMUNITY
PDO Forum ➞ http://bit.ly/PDO-Forum
SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now
TIMESTAMPS
00:00 - Gyroscopic fidget keychain in Fusion 360
00:26 - How to create user parameters in Fusion 360
01:32 - How this prints in place without supports
03:05 - Offset sketch geometry in Fusion 360
05:00 - Fully define sketch profile in Fusion 360
05:20 - Revolve sketch in Fusion 360
05:37 - Testing the user parameters
06:05 - Thangs.com explained
06:37 - Product Design Online 3D modeling challenges
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3Dprint
Grab the free file: bit.ly/gyroscopicSTL
Shoutout to Thangs.com for sponsoring the September 3D modeling challenge. Up for a challenge? ➞ bit.ly/Sept3DChallenge
Print-in-place 3D prints are super fun! Learn how to design a gyroscopic keychain in Autodesk Fusion 360, using only two commands!
This design includes two user parameters that drive the thickness and clearance of the design.
TUTORIAL RESOURCES
1. This tutorial's page ➞ productdesignonline.com/challenge
2. My checklists for Fusion 360 beginners ➞ http://bit.ly/f360checklist
SUPPORT KEVIN'S MISSION
↪Making CAD education accessible
1. Kevin's Patreon ➞ patreon.com/productdesignonline
2. Buy Kevin a Coffee ➞ buymeacoffee.com/pdo
3. Amazon storefront ➞ http://bit.ly/amazonpdo
TOP FUSION 360 PLAYLISTS
http://bit.ly/learn-fusion360
http://bit.ly/woodworker-playlist
http://bit.ly/3D-printing-playlist
http://bit.ly/sculpt-playlist
KEVIN’S FAV 3D PRINTERS
1. Ultimaker (Pro) ➞ bit.ly/kevins-printer
2. Prusa (Starter) ➞ http://bit.ly/prusa3dp
_______________________
JOIN THE PDO COMMUNITY
PDO Forum ➞ http://bit.ly/PDO-Forum
SUBSCRIBE (& Hit the Bell!)
http://bit.ly/sub-right-now
TIMESTAMPS
00:00 - Gyroscopic fidget keychain in Fusion 360
00:26 - How to create user parameters in Fusion 360
01:32 - How this prints in place without supports
03:05 - Offset sketch geometry in Fusion 360
05:00 - Fully define sketch profile in Fusion 360
05:20 - Revolve sketch in Fusion 360
05:37 - Testing the user parameters
06:05 - Thangs.com explained
06:37 - Product Design Online 3D modeling challenges
—
Disclaimer:
This video description may contain affiliate links, meaning I get a small commission if you decide to make a purchase through my links, at no cost to you.
—
#Fusion360 #ProductDesignOnline #3Dprint
