Uploaded February 2023 | Updated September 2026, 3 weeks ago
This video covers the assembly of the A and B Motors. This is fairly straightforward, but may be challenging to new builders due to the small pieces in the bearing stack.
My build was sponsored by Boxxy Prints. Get your 3d printed parts here:
boxxyprints.com/product/v0-1-printed-parts-kit/?v=0a10a0b3e53b
Printed part colors are from Fusion Filaments, Cosmic Ray Blue and Alpha Particle Orange ABS 1.5.
fusionfilaments.com/collections/abs-1-5-filament
Powder Coated Extrusions are from DLLPDF. These extrusions, at the time of the video are Mitsumi. They are powder coated and exactly 15mm x 15mm (the coating adds a small amount of thickness). I purchased a full v0.2 extrusion kit.
dllpdf.com/v0.2
Tool Recommendations: (not all were mentioned in this intro video, but are used later in my build):
**Disclosure: these are AFFILIATE LINKS- costs you nothing extra, and helps my channel
Components:
SKR Pico: amzn.to/3E0lZk5
Stepper online motors: amzn.to/3YoN6h4
Mellow Fly SHT 36 V2: boxxyprints.com/product/mellow-fly-sht-36-v2-0/?v=0a10a0b3e53b * I planned to use this, but went BTT EBB36 due to a firmware issue.
BTT EBB36: amzn.to/3xdaphQ (I used V1, but this is V1.2)
Tools:
PA-09 Engineer Crimping tool: amzn.to/3aLgZB9
Hakko Soldering Station: amzn.to/3FZtsiM
Hakko Heat Insert Tool: amzn.to/3aLh6N5
Small Finishing Sander: amzn.to/3FTwt4p
Metal Ruler: amzn.to/3n5YsoQ
Small Screwdriver Set: amzn.to/3DNNc7h
Heavy Duty Scissors: amzn.to/3DObKNm
Bondhus Hex Drivers (Ball Driver): amzn.to/3vpjti8
Wiha Hex Drivers: amzn.to/3vp5Tv4
Titan Ratcheting Crimper: amzn.to/3aKaONE
Ferrule Crimping Tool: amzn.to/2Z3axDb
Consumables:
Blue Permatex: amzn.to/3ATPmjE
Isopropyl Alcohol (Spray Bottle): amzn.to/3lRp1Pe
JST XH Connector Kit (Fan connectors, Motor Connectors, etc.): amzn.to/3BTMYuM
Synthetic Lube: amzn.to/3FUyptf
Synthetic Oil: amzn.to/3BW2TZE
Blue Permatex: amzn.to/3ATPmjE
Voron 0.1 Discord Link:
discord.com/invite/voron
This video covers the assembly of the A and B Motors. This is fairly straightforward, but may be challenging to new builders due to the small pieces in the bearing stack.
My build was sponsored by Boxxy Prints. Get your 3d printed parts here:
boxxyprints.com/product/v0-1-printed-parts-kit/?v=0a10a0b3e53b
Printed part colors are from Fusion Filaments, Cosmic Ray Blue and Alpha Particle Orange ABS 1.5.
fusionfilaments.com/collections/abs-1-5-filament
Powder Coated Extrusions are from DLLPDF. These extrusions, at the time of the video are Mitsumi. They are powder coated and exactly 15mm x 15mm (the coating adds a small amount of thickness). I purchased a full v0.2 extrusion kit.
dllpdf.com/v0.2
Tool Recommendations: (not all were mentioned in this intro video, but are used later in my build):
**Disclosure: these are AFFILIATE LINKS- costs you nothing extra, and helps my channel
Components:
SKR Pico: amzn.to/3E0lZk5
Stepper online motors: amzn.to/3YoN6h4
Mellow Fly SHT 36 V2: boxxyprints.com/product/mellow-fly-sht-36-v2-0/?v=0a10a0b3e53b * I planned to use this, but went BTT EBB36 due to a firmware issue.
BTT EBB36: amzn.to/3xdaphQ (I used V1, but this is V1.2)
Tools:
PA-09 Engineer Crimping tool: amzn.to/3aLgZB9
Hakko Soldering Station: amzn.to/3FZtsiM
Hakko Heat Insert Tool: amzn.to/3aLh6N5
Small Finishing Sander: amzn.to/3FTwt4p
Metal Ruler: amzn.to/3n5YsoQ
Small Screwdriver Set: amzn.to/3DNNc7h
Heavy Duty Scissors: amzn.to/3DObKNm
Bondhus Hex Drivers (Ball Driver): amzn.to/3vpjti8
Wiha Hex Drivers: amzn.to/3vp5Tv4
Titan Ratcheting Crimper: amzn.to/3aKaONE
Ferrule Crimping Tool: amzn.to/2Z3axDb
Consumables:
Blue Permatex: amzn.to/3ATPmjE
Isopropyl Alcohol (Spray Bottle): amzn.to/3lRp1Pe
JST XH Connector Kit (Fan connectors, Motor Connectors, etc.): amzn.to/3BTMYuM
Synthetic Lube: amzn.to/3FUyptf
Synthetic Oil: amzn.to/3BW2TZE
Blue Permatex: amzn.to/3ATPmjE
Voron 0.1 Discord Link:
discord.com/invite/voron
