Peter Millard
| Paint & Flammables Cabinet, Part 1 #075 @10MinuteWorkshop | Updated October 2024, 3 hours ago.
🔇 TAP TO UNMUTE
Paint & Flammables Cabinet, Part 1 #075 @10MinuteWorkshop
![Plywood Shelves - A Basic Build video [Video 491]](https://i.ytimg.com/vi/gNobuRCBr_Q/hqdefault.jpg "Plywood Shelves - A Basic Build video [Video 491]
In this video I make a set of BirchPly shelves using only a simple toolset - an entry-level plunge saw, a drill/driver and a set of cheap chisels. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest:-
Michael Alm instagram dowels - https://www.instagram.com/reel/CaBCKvzFrnx/
Izzy Swan dowels - https://www.youtube.com/watch?v=A5QVkyOTZZY
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
DIY MFT follow-on - https://youtu.be/wyGNs1GYdCk
Dave Stanton’s Dog Stop video here - https://www.youtube.com/watch?v=GWcdI5aBB_M
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
Benchdogs FenceDogs - https://youtu.be/DezSQjhcbbk
Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
Parkside or Macallister Plunge Saw? - https://youtu.be/Ebm-EEXNZHE
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
All my tracksaw-related videos are in a playlist here - http://bit.ly/TracksawWorkshop
New to the MFT or MultiFunction Table? Here’s a couple of explainers:-
Festool MFT - https://youtu.be/0V-p5F7SjO4
MFT follow-on - https://youtu.be/RxcVY8ZR2fQ
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, and a Benchdogs affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Note that prices fluctuate - some have risen since I made my purchases.
Cheap chisels [similar] - https://amzn.to/3NFmCTm (US: [similar] https://amzn.to/386DYZ4)
Twist drill set from Rennie Tools; use the offer code 10MINUTEWORKSHOP for a 5% discount at Rennie Tools - https://www.rennietool.co.uk?aff=2
Corner plates - https://amzn.to/2RopWZy (US: sorry, these seem to be a non-US item, closest I can find is a regular corner bracket - https://amzn.to/2FpLX37)
Lost-tite screws - http://amzn.to/2pGnUFD (US: http://amzn.to/2pVKqa6)
Macallister plunge saw - available in the UK from B&Q stores at diy.com
10.8v drill/driver [similar] - https://amzn.to/3tQAEJ0
20mm conduit - https://www.toolstation.com/20mm-heavy-duty-pvc-round-conduit/p71029
Guiderail connector [similar] - https://tools4trade.co.uk/products/excel-universal-guide-rail-connector
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Mistakes: Ive made a few... [video 545]](https://i.ytimg.com/vi/gYz8nUARKGk/hqdefault.jpg "Mistakes: Ive made a few... [video 545]
You know how they say that you never really get better at something, you just get better at hiding your mistakes? Well in this video I’m going to ‘fess up to some real howlers that I made during the drawer cabinet build earlier in the year, and also show you how I resolved them. Enjoy!
Sign up for the newsletter at 10minuteworkshop.email or 10MW.email and get the free 5 Glues I use fact sheet; actually, it might be 6... 🤔
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Fancy giving this Trend Loose Tenons a try? Visit https://bit.ly/Loosetenons and use offer code “10MINUTEWORKSHOP” at checkout for 10% discount, valid until the end of October 2023.
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
10MW Loose Tenon Jig 30 - https://youtu.be/enGVfEwD-Tc
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Cabinetry Basics P1 - https://youtu.be/3N_T-YpkBCg
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
All About Drawers playlist - https://bit.ly/AllAboutDrawers
Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Jointing systems playlist - http://bit.ly/JointingSystems
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com")
![AUK Motor and Jessem Lift [*Gifted/Ad][video 511]](https://i.ytimg.com/vi/h47fFhhohgs/hqdefault.jpg "AUK Motor and Jessem Lift [*Gifted/Ad][video 511]
In this one I’m changing the Sautershop milling motor and lift for the AUK router and Jessem lift. Enjoy!
*Products supplied for review by Woodworkers Workshop. I have not been paid to make this video or say nice things about the product, as a WWW affiliate I may earn from qualifying sales; be sure to use the offer code ’10MINUTEWORKSHOP’ with the links below for a 5% discount (valid until December 31st 2022) on these products, and thanks so much to Woodworkers Workshop for extending that offer.
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-1500w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-router-insert-plate-template/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-stainless-steel-router-plate-insert-pad/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-8mm-er20-collet-for-auktools-routers/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/jessem-mast-r-lift-ii-metric/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/jessem-mast-r-lift-ii-metric-with-auktools-2400w-fixed-base-router-remote-speed-control-and-nvr/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/jessem-mast-r-lift-ii-metric-with-auktools-2400w-fixed-base-router/?ref=YUDlxZ4f
https://woodworkersworkshop.co.uk/auktools-1500w-fixed-base-router/?ref=YUDlxZ4f
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Torsion Box Router Bench Build - https://youtu.be/Q-Vyq4ShHT0
Random orbital disc sander - https://youtu.be/jH2afycjcbM
Money, Mouth, Mirka - https://youtu.be/5XDUWQ_Jodo
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Matchfit Microjig Dovetail Clamp System - https://youtu.be/uiT6F-K26Tg
11 Routers; or is that 13?? - https://youtu.be/Y_gLxlCcY5Y
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Basic plywood boxes - https://youtu.be/li5AIXw3XPE
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured in this video (other brands are available)
Keith Brown clear wax - https://www.etsy.com/uk/listing/1314396026/kb-oil-wax-wood-finish-clear-250ml-non
Tailors Awl (or ‘scratch’ or ‘tickers’ Awl) - https://amzn.to/3i06QaE
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ (US - https://amzn.to/3hVicMV)
Allen key set - https://amzn.to/3XwUTZY
Mirka Deros - https://amzn.to/3MLMg96
Mirka Abranet 150mm disc P120 - https://amzn.to/3TkWu2I
Festool CXS - https://amzn.to/3OACck1 (US: http://amzn.to/2r0TZ7U)
Festool Midi - https://amzn.to/3EYrDnO (US: http://amzn.to/2rKNIOx)
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Router bench Teardown - but what’s inside? [video 476]](https://i.ytimg.com/vi/hRCSoNlQFew/hqdefault.jpg "Router bench Teardown - but what’s inside? [video 476]
So it’s time to rebuild my router bench as part of the workshop makeover, and while it was being stripped out I thought I’d take the time to talk through it, and show just how simple an effective router bench can be - and maybe explain a little about why the one that replaces it won’t be quite so simple. Enjoy!
.
IEC 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers can be found here - https://webstore.iec.ch/publication/33941
About that legislation…
OK, so many, many questions about this and I only know what I’ve been told; I’m expecting to have a bit more information about it in the next video. Its really hard to get solid information on the legislation without buying a copy pf the IEC standard (link above, ~£120 - feel free to go ahead and tell me what you find...) but from what Im told, the legislation is really for manufacturers, it doesnt effect legacy routers, only new sales, and retailers have 12 months to sell their existing stock.
The legislation comes into force on December 21st this year, and the principle change is the addition of a built-in equivalent of an NVR switch, which would make routers difficult to use in a table. There was talk apparently of expanding the reach to include routers used in professional workshops, but that seems to have been dropped as Id imagine it would be impossible to police or enforce.
Thats all I know for now - hope to have more for next week. 👍
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Workshop tour https://youtu.be/Ce_gMwIQQsk
Cabinetry Basics P4 https://youtu.be/urMoCGpzZTc
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Triton TRA 001 router - https://amzn.to/2ZMI4S3 (US: https://amzn.to/3q1SGrd)
Other fine gear:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connectors - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Parallel Guides or Rail Square? [Video 473][**Gifted/Ad]](https://i.ytimg.com/vi/i1AK9bG3K_w/hqdefault.jpg "Parallel Guides or Rail Square? [Video 473][**Gifted/Ad]
In this video I look at the pros and cons of a #Benchdogs #RailSquare and a set of #ParallelGuides as the tracksaw accessory of choice. Parallel guides for rips, and Rail Square for crosscuts? Well, yes, but theres a bit more to it than that... Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales, so be sure to use the offer code “10minuteworkshop” at checkout and receive a 5% discount across the board at Benchdogs (links below)
+++++++++
Benchdogs Parallel Guides -https://benchdogs.co.uk/collections/parallel-guide-system?ref=1x_p0bagtnr
Benchdogs Rail Squares - https://benchdogs.co.uk/collections/rail-square?ref=1x_p0bagtnr
Benchdogs store - https://benchdogs.co.uk/?ref=1x_p0bagtnr
Benchdogs fence systems - https://benchdogs.co.uk/collections/fence-systems?ref=1x_p0bagtnr
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Benchdogs fence dogs - https://benchdogs.co.uk/products/fence-dogs?ref=1x_p0bagtnr
+++++++++
Other videos mentioned / related:-
Original Benchdogs Rail square - https://youtu.be/qik-UoZUAgg
Benchdogs Parallel Guides - https://youtu.be/iYuV0El8dgU
Timberyard Tour - https://youtu.be/W66tCi3KT3s
Cabinetry Basics - https://youtu.be/3N_T-YpkBCg
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
DIY Reference square - https://youtu.be/aNjO4SBe5kw
DIY Rail Square - https://youtu.be/VaxG6vNF1kY
DIY Parallel Guides (Tracksaw Workshop P5) - https://youtu.be/PyyFyuEbkrI
All tracksaw related videos - http://bit.ly/TracksawWorkshop
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate and eBay Partner, I earn from qualifying purchases made through these links. As a Benchdogs affiliate I may earn from qualifying purchases; use offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in recent videos:-
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square (gifted) - https://bit.ly/bench-dogs
Other useful gear:-
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
Tracksaw, plungesaw, plunge saw, track saw, guiderail, track, guide rail, parallel guides, rail square,")
![Cast Iron Garden Bench Repair [video 501]](https://i.ytimg.com/vi/i5p-B9a_79g/hqdefault.jpg "Cast Iron Garden Bench Repair [video 501]
Continuing the 10Minute Repair Workshop theme, in this video I’m replacing the slats on a cast iron garden bench for a neighbour. Enjoy!
+++++++++
Become a 10minuteworkshop Plus member at 10minuteworkshop.plus
Check out the blog and forums at 10minuteworkahop.com
Support 10 Minute Workshop as a YouTube Member http://bit.ly/10minuteMember
Support 10 Minute Workshop on Patreon - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
MFT Playlist - all my MFT & MFT-related videos in one place - http://bit.ly/MFT-related
Ikea Curtain-track MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Pocket-money Rail Square - https://youtu.be/VaxG6vNF1kY
Tracksaw workshop playlist - http://bit.ly/TracksawWorkshop
Festool or Mafell https://youtu.be/5kqui1b0SbU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
+++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Cabinetry Basics P3 [Video 437]](https://i.ytimg.com/vi/iKle2JqhEV8/hqdefault.jpg "Cabinetry Basics P3 [Video 437]
I get a lot of questions about #cabinet and #carcass #construction and in this series I aim to answer them all; in Part 1 I discussed the fundamentals of construction, in Part 2 I went going through the most basic methods of joining the sides to the top & base, and here in Part 3 we’re upping our game and using seven different types of hidden fixings.
Part 1 is here - https://youtu.be/3N_T-YpkBCg
Part 2 is here - https://youtu.be/LPGH_BhIzZg
+++++++++
Become a 10minuteworkshop Plus member - more details at 10minuteworkshop.com, sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from the legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Join my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Mentioned in this video:-
Dowel jig - https://amzn.to/2MgiBdl (US:[similar] https://amzn.to/3a0HKjX)
8 x 30mm dowels - https://amzn.to/38yb16J (US:[3/8th] https://amzn.to/2KJAKQ5)
Lamello Biscuits - https://amzn.to/39fuNnv (US: https://amzn.to/367dEKL)
Aldi Ferrex biscuit jointer no longer available
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connector set - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Lamello Zeta P2 - https://amzn.to/2Xpu5vB (US: https://amzn.to/2Kufuv1)
Lamello Clamex P-14 https://amzn.to/2Wkm922 (US: ??)
Peanut 2 connector system - http://shop.intelligentfixings.com?ref=10minuteworkshop
Lamello Tenso P-14 - https://amzn.to/2Z5i4eX (US: woah - are these not available in the US??)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![Parallel guides [**Gifted/Ad] Video 440](https://i.ytimg.com/vi/iYuV0El8dgU/hqdefault.jpg "Parallel guides [**Gifted/Ad] Video 440
*My apologies; in the video I mistakenly referred to the ex VAT prices as including VAT; theyre all priced plus VAT on the benchdogs website; apologies again for any confusion*
In this video I take a closer look at the new #Parallel #Guides from #Benchdogs. NB: The Benchdogs parallel guides attach using the upward-facing t-slot on the left-hand side of the standard Festool-pattern guiderail eg Festool, Makita, Triton, Erbauer, Titan, Excel etc... If your rails dont have this upwards-facing t-slot, they wont fit.
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales, so be sure to use the offer code “10minuteworkshop” at checkout and receive a 5% discount across the board at Benchdogs (links below)
.
Benchdogs Parallel Guides - https://benchdogs.co.uk/collections/new-products/products/parallel-guide-system?ref=1x_p0bagtnr
Benchdogs store - https://benchdogs.co.uk/?ref=1x_p0bagtnr
Benchdogs fence systems - https://benchdogs.co.uk/collections/fence-systems?ref=1x_p0bagtnr
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Benchdogs fence dogs - https://benchdogs.co.uk/products/fence-dogs?ref=1x_p0bagtnr
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos with Benchdog products:-
402 Rail square - https://youtu.be/qik-UoZUAgg
420 Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
422 Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
424 LR32 MFT - https://youtu.be/C_J-PKrUo1Y
426 Portable Bench - https://youtu.be/7OqrljJHOaw
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Workshop shelves & cabinets [Video 444]](https://i.ytimg.com/vi/iaB_CL5md8U/hqdefault.jpg "Workshop shelves & cabinets [Video 444]
In this longer video I make a start on the workshop makeover, reusing some of my cabinets from the Cabinetry basics series - mostly to get them out of the way - and using up some old boards I used to use as scaffolding, to make some open shelves. Enjoy!
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos mentioned:-
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
As an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
RGB LED lights,5 metres - https://amzn.to/2OKpXGV (US: https://amzn.to/3vlEjhW)
RGB LED light extension and connectors - https://amzn.to/3eLzmJ9 (US: https://amzn.to/3eMYcZ8)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square - https://bit.ly/bench-dogs
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![5 Quick Tips to keep your Tracksaw - and you - Happy [video 553]](https://i.ytimg.com/vi/ifFmIHMAoeI/hqdefault.jpg "5 Quick Tips to keep your Tracksaw - and you - Happy [video 553]
Back on the tracksaw trail this week and in this one I’m sharing five quick tips to help keep you and your tracksaw making great cuts. Enjoy!
Stuck for gift ideas? Check out my 2023 Gift List video here - https://youtu.be/cCOUz_tmVeY
+++++++++
Visit the 10MinuteWorkshop store for the Loose Tenon Jig 30 and ‘Square Enough’ assembly guides at www.10minute.shop
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I may earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Browse the Amazon Black Friday deals - https://www.amazon.co.uk/blackfriday?tag=tracking-21
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Become a 10minuteworkshop Plus member for exclusive content - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos and playlists of interest:-
Easy accurate repeat cuts - https://youtu.be/vHX5j2820nk
Tracksaw workshop Playlist - http://bit.ly/TracksawWorkshop
Base cabinet basics - https://bit.ly/BaseCabBasics
Gift ideas and projects playlist - https://bit.ly/10MWGiftLists
Cabinetry basics playlist - http://bit.ly/CabinetryBasics
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
See the full Gift List 2023 on Amazon here - https://amzn.to/3R6GjHG
Rennie Tools saw blades - https://www.rennietool.co.uk/collections/160mm-diameter-tct-saw-blades?aff=2
Makita 3-metre splinter guard - https://amzn.to/3GjVyXu
Festool clear 1.4m splinter guard - https://amzn.to/3N5hUja
Festool TS55 stock 48t blade - https://amzn.to/49VluGz
Festool TS55 28t universal blade - https://amzn.to/4a9LePE
Hultafors Talmeter tape measure - https://amzn.to/3rdewuP
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs stainless steel bevel square (Gifted) - https://benchdogs.co.uk/collections/measuring-tools/products/stainless-steel-triangle-150?ref=1x_p0bagtnr")
