Peter Millard
| Is Garnica #Globulus a real #BirchPly #Alternative? @10MinuteWorkshop | Uploaded 1 year ago | Updated 2 minutes ago
🔇 TAP TO UNMUTE
Is Garnica #Globulus a real #BirchPly #Alternative? @10MinuteWorkshop
![$135 ‘Deros’ 1 Year On vs £175, 2021 Sealey [video 483]](https://i.ytimg.com/vi/jelEm54OLQw/hqdefault.jpg "$135 ‘Deros’ 1 Year On vs £175, 2021 Sealey [video 483]
In this video I revisit the $135 ‘#Deros -alike’ Hyvst #sander and compare it to the visually very similar #Sealey sander I bought recently for £175. Enjoy!
This will be my last ‘proper’ video of the year, so I’d like to extend the season’s greeting to everyone, and my very best wishes. Peter
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Keith’s Hyvst vs Deros video - https://www.youtube.com/watch?v=IlJaS-iiL10
Leo’s Deros video - https://www.youtube.com/watch?v=wRudRP7GDAM
Dawn on instagram - https://www.instagram.com/tworiversworkshop/
Gary on Instagram - https://www.instagram.com/cook_joinery/
135 Dollar Deros - https://youtu.be/46Ws3Bgp_bA
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
Lightweight Folding trestles - https://youtu.be/bvZkRE6rCEs
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Loose Tenon Basics - https://youtu.be/t86QGUn7dAI
Dowel Jig Basics - https://youtu.be/zTj_hiEVfvw
10 years of Domino - https://youtu.be/7oxd2Qnvyw0
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Sealey sander (cheaper elsewhere) - https://amzn.to/32eML8Q (US: [similar, unavailable] https://amzn.to/30LzAeM)
Hyvst sander on AliExpress - https://bit.ly/HyvstSander
Menzer sander, visually similar - https://amzn.to/3t2enY6
SPTA sander (US, visually similar - https://amzn.to/3IaWFbe)
125mm (5”) 3rd party Deros/Ceros pad - http://ebay.us/9CmwGI
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi bluetooth extractor - https://amzn.to/3q29VXI (US: 🤷♂️)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirka Deros 240v (NB better prices available elsewhere) - https://amzn.to/37DbmCH
Festool ETS 125 - https://amzn.to/2RSAEDD (US: https://amzn.to/2JZy0t5)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Other useful gear:-
10 Minute Workshop Loose Tenon Jig (register for availability) - https://bit.ly/10MWLTJ_register
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Maxitek Storm D4 adhesive - http://bit.ly/StormD4PVA
+++++++++")
![DIY Peanut Jig [**Gifted/Ad][video 449]](https://i.ytimg.com/vi/jhhCnv9rW0M/hqdefault.jpg "DIY Peanut Jig [**Gifted/Ad][video 449]
In this slightly longer video I use my #Peanut2 #MiniJig from @IntelligentFixings (available direct, or through @AxminsterTools) to make a #DIY dedicated carcass jig for eg cabinets and wardrobes. Enjoy!
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video or say nice things about the product; as an affiliate I may earn from qualifying sales.
+++++++++
Peanut 2 Mini Jig bundle at Axminster Tools - https://www.tagserve.com/clickServlet?AID=2805&MID=485&PID=691&SID=3464&CID=1965&SUBID=&TARGETURL=https://www.axminstertools.com/peanut-2-mini-jig-complete-package-107760?utm_source=tag&utm_medium=affiliates&utm_content={TAG.AID}
Axminster tools on YouTube - https://www.youtube.com/user/axminstertoolcentre
Intelligent Fixings on YouTube - https://www.youtube.com/channel/UCk4S-y5jUNpWNBV4mcy8CHQ
Peanut 2 Mini Jig bundle at IF - https://shop.intelligentfixings.com/products/peanut-mini-jig-complete-set?ref=10minuteworkshop
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
Peanut 2 System - https://youtu.be/AjS2cAiQyzY
Peanut 2 Mini Jig - https://youtu.be/DsvpAjGizKs
Birch Ply Bedside Cabinet - https://youtu.be/aJNzOZCHrGU
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Trend T4 router - https://amzn.to/3ckBOF8 (US: 🤔)
8mm collet for above - https://amzn.to/3dEuzrW (US: 🤷♂️)
Strawbyte waste side jigs; use the offer code 10MINUTEWORKSHOP for 10% discount across the board at strawbyte.com - http://bit.ly/Strawbyte_jigs
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![I Transform 2 ‘MFT’ Benches With 1 Easy Upgrade! [video 587]](https://i.ytimg.com/vi/jsYrR3zWcEs/hqdefault.jpg "I Transform 2 ‘MFT’ Benches With 1 Easy Upgrade! [video 587]
In this one I revisit the #Metabo MWB100 and #Excel #MFT portable benches, get to the bottom of the ‘tight dog-hole’ issue and take you though a couple of ways to make it right.
Metabo UK have confirmed that whilst they make the dog-holes on the MWB100 a snug fit, a ‘small number’ with undersized holes are already in the system; Metabo’s head of sales and marketing has confirmed that using a reamer to open up the dog-holes in the bench top will not invalidate your warranty.
I am not associated or affiliated in any way with Metabo, I purchased this bench as any customer would, and I bought mine from ProTrade, here - https://www.protrade.co.uk/product/metabo-mwb100-multifuction-workbench/
Replacement top for the Metabo MWB 100 available here - https://karvdcnc.myshopify.com/products/replacement-top-for-the-metabo-mwb100-multifunction-workbench
Replacement top for the Excel workbench available here - https://karvdcnc.myshopify.com/products/excel-workbench-replacement-top
Excel workbench now down to £60 here - https://tools4trade.co.uk/collections/workbenches-sawhorses/products/excel-2-in-1-foldable-workbench-table-sawhorse-adjustable-height-with-2-clamps
I am not affiliated or associated with the above companies, I am simply a happy customer.
Table of Contents:
00:00 Introduction
01:26 Official response
02:59 Official remedy
04:13 New top - easy option
05:17 Metabo top replacement
08:43 Excel top replacement
11:32 Upgrade pros & cons
13:20 Surprise similarities
14:22 Outro
Related content:
Metabos £200/$250 MFT - https://youtu.be/aWozkUUDdc8
Excel £80 mini-me MFT - https://youtu.be/wtaUuaV54Xk
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Benchdogs Ultra MFT Workstation First Look - https://youtu.be/qZK7BWI-PH0
Bargain or Burden; first look at Wolfcraft ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 Quick Fixes (Wolfcraft ‘MFT’) - https://youtu.be/3qCU8dzIJ_c
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
Ikea Curtain track DIY MFT - https://youtu.be/223QALIbnRc
Backyard, Budget DIY MFT -https://youtu.be/xIi-I04ocVM
Portable Bench Build - https://youtu.be/7OqrljJHOaw
Ultralight Portable Bench - https://youtu.be/oEiiVAiBvt0
Extrusion Confusion - A Guide To MFT Hardware - https://youtu.be/za5B-XrSuH0
3 MFT jigs, 3 MFT tops - https://youtu.be/iAIZQsXPXR4
SauterShop VarioBench - https://youtu.be/0Cs092FZW3U
MFT top replacement - https://youtu.be/09an8aZrTqs
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
LR32 MFT - https://youtu.be/C_J-PKrUo1Y
The Tracksaw Workshop playlist - http://bit.ly/TracksawWorkshop
Newsletter and memberships:
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch.
‘A Week In The Workshop’ is a member exclusive weekly vlog-style video; I generally produce two of these a week for members with a paid subscription; Plus members joining on a free plan receive one of these videos per month, at my discretion.
A Week In The Workshop 244 covers using the Benchdog tools reamer on the Excel workbench, made available as a public video here - https://youtu.be/2uyUmNAARBY
Join the conversation as a 10minuteworkshop Plus member and get the factsheets, free plans* and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Store:
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
Affiliate Links:
As an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Portable workbenches - https://amzn.to/4csRhOW
Benchdogs Reaming too - https://benchdogs.co.uk/products/20mm-mft-top-reamer?_pos=1&_sid=d95976cf3&_ss=r&ref=1x_p0bagtnr
UJK Reaming tool - https://amzn.to/3zBffKz")
![Better than Baltic Birch? [video 572]](https://i.ytimg.com/vi/kA-LswBI_oY/hqdefault.jpg "Better than Baltic Birch? [video 572]
In this one I make some plywood inserts for the recent #SYS-TOTE, but instead of using 4mm ‘Baltic’ #BirchPlywood, I use something far more interesting - and expensive! Enjoy!
Register free for the Materials and finishes show -
https://materials-finishes-show-2024.reg.buzz/peter-millard
Thanks to Adam Savage @tested for highlighting this plywood in his ‘drawer dividers’ one day build - https://www.youtube.com/watch?v=RrhPaiEiAqQ&t=4s
In the U.S. buy similar plywood from aircraftspruce.com, @aircraftsprucevideos
I bought my 4mm ply from the Swindon Aircraft Timber Company - http://www.aircraftplywoodandtimber.co.uk/index.html
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
My 6 Top Tapes - https://youtu.be/zj_IKd8XYNI
Which glue when? - https://youtu.be/yEQYirGvWCs
DIY Rail Stop - https://youtu.be/nWpSFoKJXeg
DIY Rail Guiderail Adapter - https://youtu.be/zzbS0yObBhk
Bargain or Burden; first look at woodcrafts ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - https://bit.ly/BasicBuilds
My Last Build & Install - https://bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Plywood A3 sheet hobby pack - https://amzn.to/3QEbg5l
Plywood A4 sheet hobby packs - https://amzn.to/4d3bg8H
Tesa 4440 exterior blue tape (B096BKNFM2) - https://amzn.to/3Q3lBYo
Birch Laser ply from Tilgear - https://www.tilgear.info/materials/wooden-materials
Aero ply from Chiltern timber - https://www.chilterntimber.co.uk/product/plywood-aircraft-birch-plywood-grade-1525-x-1525-x-1-5mm/
Bessey DuoKlamp - https://amzn.to/3eDz1Ig
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Hinge drilling guide (used as a saddle square) - https://amzn.to/48jp0ty
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
BicMatic Fine point 0.5mm pencils - https://amzn.to/3uldrlX
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs Ultra COMBI Max square - https://benchdogs.co.uk/products/ultra-combi-max-square-320mm?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Lidl Parkside Plunge Saw 2021 [video 455]](https://i.ytimg.com/vi/kFyDGdH66HM/hqdefault.jpg "Lidl Parkside Plunge Saw 2021 [video 455]
In this quick follow-on video I take a look at the 2021 #Lidl #Parkside PTSS 1200 C2 #PlungeSaw. Enjoy.
Extra Lidl rails available here - https://www.kompernass.com/en/accessories/843/guide-rail
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
Festool vs Cheap P 1 - https://youtu.be/_8sagpnlF1Q
Trascksaw workshop P1 - https://youtu.be/8JQjGwZT3Ak
A Lidl blade upgrade - https://youtu.be/6TNaspl5DpY
Which rails work; a guide to guide rails - https://youtu.be/_HtpT_bK7zw
Tracksaw workshop & all tracksaw-related videos playlist - http://bit.ly/TracksawWorkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Lidl Parkside plunge saw - https://www.lidl.co.uk/p/diy-tools/parkside-plunge-saw/p42993
Screwfix MacAllister plunge saw - https://www.screwfix.com/p/mac-allister-msps1200-165mm-electric-plunge-saw-220-240v/274gf#product_additional_details_container
Triton 48t blade - https://amzn.to/2EQgUMJ
Evolution guide rails - https://amzn.to/2IhI149
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![5 Basic Clamps [video 452]](https://i.ytimg.com/vi/kfWIsh-X8HQ/hqdefault.jpg "5 Basic Clamps [video 452]
In this video I talk about the 5 basic #clamp types that have served my #woodwork #clamping needs well over the last 20 years. Enjoy!
Note that this isn’t a “the only clamps you need’ kind of video, and I miss out some that are firm favourites with other folks - pipe clamps for example - partly because I’ve had no need for them, personally, and partly because whilst they may available here in the UK they’re certainly not as popular as they are with our American YouTubing cousins because the pipe they attach to is much harder to come across. There’s nothing wrong with them - they’re just not what I’ve used.
Same with the ratchet-style rail clamps too - I probably use them more than anything, but to me theyre just a variation on the F-clamp. 🤷♂️
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - https://youtu.be/enmHfvgRTrw
5 Festool gamechangers - https://youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Heavy duty spring clamps - https://amzn.to/2Rw0b5u (US:similar) https://amzn.to/2qSwgZV)
Irwin quick grip clamps - https://amzn.to/3eF8ZV3 (US: https://amzn.to/3tMuJmh)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Aluminium sash clamp - https://amzn.to/3o7jwLG (US: [similar - link for reference, crazy price!] https://amzn.to/3hhqz2S)
F clamp [similar] - https://amzn.to/2RHbSvm (US: [similar] https://amzn.to/3bj3ARq)
Parallel jaw clamp [similar] - https://amzn.to/33xiKOA (US: [similar] https://amzn.to/3vPVwzo)
Other useful gear:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Everbuild Lumberjack 5-minute PU adhesive - https://amzn.to/2rSAAMn (US: nope)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Basic Plywood Boxes [video 445]](https://i.ytimg.com/vi/li5AIXw3XPE/hqdefault.jpg "Basic Plywood Boxes [video 445]
In this video I carry on with the workshop makeover, banging out some basic plywood boxes to sit in the cabinets. Enjoy!
BTW my clamp guides are back in my Etsy store, here - https://bit.ly/ClampGuides
++++++++
I’d like to thank MEDITE SMARTPLY for their support of the channel at this time: MEDITE makes it real, discover more here:https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaig
++++++++
Other videos mentioned:-
Workshop cabinets and shelves - https://youtu.be/iaB_CL5md8U
Cabinetry basics P1 - https://youtu.be/3N_T-YpkBCg
$135 Deros - https://youtu.be/46Ws3Bgp_bA
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Strawbyte plunge saw dust cover & hose clips - https://www.strawbyte.com/merchandise?category=Festool+Accessories
Mirka Abralon - https://amzn.to/3vQvEUF (US: https://amzn.to/3vQNffo)
Junckers Strong flooring lacquer - https://amzn.to/3rdq8Im (US: [similar] https://amzn.to/3seFL3D)
Liberon beeswax - http://amzn.to/2zTixUU (US:http://amzn.to/2zklbal)
RGB LED lights,5 metres - https://amzn.to/2OKpXGV (US: https://amzn.to/3vlEjhW)
RGB LED light extension and connectors - https://amzn.to/3eLzmJ9 (US: https://amzn.to/3eMYcZ8)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Benchdogs bench dogs - https://benchdogs.co.uk/collections/bench-dogs?ref=1x_p0bagtnr
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Benchdogs rail square - https://bit.ly/bench-dogs
Other handy gear:-
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![[**Gifted/Ad]Benchdogs Parallel Guides Mk2 and Rail Square Repeat Stop [video 509]](https://i.ytimg.com/vi/ltuhT90ijz4/hqdefault.jpg "[**Gifted/Ad]Benchdogs Parallel Guides Mk2 and Rail Square Repeat Stop [video 509]
In this one I’m taking a quick look at the Benchdogs Parallel guides Mk2 and the Repeat Stop for the Rail Square Mk 2. Enjoy!
**Products were supplied for review by Benchdogs, I haven’t been paid to make this video or to say nice things about the products, as a Benchdogs affiliate you bet I’ll earn from qualifying sales so be sure to use the offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Parallel guides or Rail square - https://youtu.be/i1AK9bG3K_w
Original Benchdogs Rail square - https://youtu.be/qik-UoZUAgg
Benchdogs Parallel Guides - https://youtu.be/iYuV0El8dgU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate
Benchdogs Parallel Guides -https://benchdogs.co.uk/collections/parallel-guide-festool-makita-triton/products/330mm-parallel-guide-system-festool-makita?ref=1x_p0bagtnr
Benchdogs Rail Squares - https://benchdogs.co.uk/collections/rail-square?ref=1x_p0bagtnr
Benchdogs repeat stop - https://benchdogs.co.uk/collections/mk2-rail-square-accessories-festool-makita/products/rail-square-repeat-stop-festool-makita-triton-evolution?ref=1x_p0bagtnr
Benchdogs store - https://benchdogs.co.uk/?ref=1x_p0bagtnr
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
