Peter Millard | [**Gifted/Ad]Benchdogs Parallel Guides Mk2 and Rail Square Repeat Stop [video 509] @10MinuteWorkshop | Uploaded 1 year ago | Updated 19 seconds ago
In this one I’m taking a quick look at the Benchdogs Parallel guides Mk2 and the Repeat Stop for the Rail Square Mk 2. Enjoy!
**Products were supplied for review by Benchdogs, I haven’t been paid to make this video or to say nice things about the products, as a Benchdogs affiliate you bet I’ll earn from qualifying sales so be sure to use the offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Parallel guides or Rail square - youtu.be/i1AK9bG3K_w
Original Benchdogs Rail square - youtu.be/qik-UoZUAgg
Benchdogs Parallel Guides - youtu.be/iYuV0El8dgU
Square Cuts: MFT or Rail Square? - youtu.be/3C8XSWliOys
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate
Benchdogs Parallel Guides -benchdogs.co.uk/collections/parallel-guide-festool-makita-triton/products/330mm-parallel-guide-system-festool-makita?ref=1x_p0bagtnr
Benchdogs Rail Squares - benchdogs.co.uk/collections/rail-square?ref=1x_p0bagtnr
Benchdogs repeat stop - benchdogs.co.uk/collections/mk2-rail-square-accessories-festool-makita/products/rail-square-repeat-stop-festool-makita-triton-evolution?ref=1x_p0bagtnr
Benchdogs store - benchdogs.co.uk/?ref=1x_p0bagtnr
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
In this one I’m taking a quick look at the Benchdogs Parallel guides Mk2 and the Repeat Stop for the Rail Square Mk 2. Enjoy!
**Products were supplied for review by Benchdogs, I haven’t been paid to make this video or to say nice things about the products, as a Benchdogs affiliate you bet I’ll earn from qualifying sales so be sure to use the offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Parallel guides or Rail square - youtu.be/i1AK9bG3K_w
Original Benchdogs Rail square - youtu.be/qik-UoZUAgg
Benchdogs Parallel Guides - youtu.be/iYuV0El8dgU
Square Cuts: MFT or Rail Square? - youtu.be/3C8XSWliOys
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate
Benchdogs Parallel Guides -benchdogs.co.uk/collections/parallel-guide-festool-makita-triton/products/330mm-parallel-guide-system-festool-makita?ref=1x_p0bagtnr
Benchdogs Rail Squares - benchdogs.co.uk/collections/rail-square?ref=1x_p0bagtnr
Benchdogs repeat stop - benchdogs.co.uk/collections/mk2-rail-square-accessories-festool-makita/products/rail-square-repeat-stop-festool-makita-triton-evolution?ref=1x_p0bagtnr
Benchdogs store - benchdogs.co.uk/?ref=1x_p0bagtnr
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - amzn.to/2P2c5nP (US:amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++
![[**Gifted/Ad]Benchdogs Parallel Guides Mk2 and Rail Square Repeat Stop [video 509]](https://i.ytimg.com/vi/ltuhT90ijz4/hqdefault.jpg "[**Gifted/Ad]Benchdogs Parallel Guides Mk2 and Rail Square Repeat Stop [video 509]
In this one I’m taking a quick look at the Benchdogs Parallel guides Mk2 and the Repeat Stop for the Rail Square Mk 2. Enjoy!
**Products were supplied for review by Benchdogs, I haven’t been paid to make this video or to say nice things about the products, as a Benchdogs affiliate you bet I’ll earn from qualifying sales so be sure to use the offer code 10minuteworkshop at checkout for a 5% discount across the board at Benchdogs.co.uk
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
**Support 10 Minute Workshop as a YouTube Member** http://bit.ly/10minuteMember
**Support 10 Minute Workshop on Patreon** - http://www.patreon.com/10minuteworkshop
**Please note that I am moving away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM will be significantly reduced from October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Parallel guides or Rail square - https://youtu.be/i1AK9bG3K_w
Original Benchdogs Rail square - https://youtu.be/qik-UoZUAgg
Benchdogs Parallel Guides - https://youtu.be/iYuV0El8dgU
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Benchdogs and Rennie Tools affiliate, I may earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Note that prices fluctuate
Benchdogs Parallel Guides -https://benchdogs.co.uk/collections/parallel-guide-festool-makita-triton/products/330mm-parallel-guide-system-festool-makita?ref=1x_p0bagtnr
Benchdogs Rail Squares - https://benchdogs.co.uk/collections/rail-square?ref=1x_p0bagtnr
Benchdogs repeat stop - https://benchdogs.co.uk/collections/mk2-rail-square-accessories-festool-makita/products/rail-square-repeat-stop-festool-makita-triton-evolution?ref=1x_p0bagtnr
Benchdogs store - https://benchdogs.co.uk/?ref=1x_p0bagtnr
Other handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Festool Domino, Mafell Doweller or Lamello Zeta? [video #360]](https://i.ytimg.com/vi/m78BZHu-uuA/hqdefault.jpg "Festool Domino, Mafell Doweller or Lamello Zeta? [video #360]
Festool Domino, Mafell Doweller or Lamello Zeta? [video #360]")
![Festool vs Cheap Tool; MFT clamps [video 408]](https://i.ytimg.com/vi/mG5siTVitUw/hqdefault.jpg "Festool vs Cheap Tool; MFT clamps [video 408]
Festool vs Cheap Tool; MFT clamps [video 408]")
![Ikea Hack! Wall Cabinets on the Floor?? [video 528]](https://i.ytimg.com/vi/mRTVt9i8J4E/hqdefault.jpg "Ikea Hack! Wall Cabinets on the Floor?? [video 528]
Does This Look Like IKEA to You? In this one I’m remodelling my home office using Ikea Metod wall cabinets as base units, and as well as explaining why, I take you on a detailed tour of the whole process, including making and levelling plinths, #scribing a worktop, making #doors and shelves, and some top tips for painting too!
No, I’m not turning into an #IkeaHack channel, but sometime you need to take the path of least resistance to get things done. Enjoy!
Full list of individual products used in this video below, or browse my Amazon store at 10MinuteAmazon.com
Want to see how the 32-year-old Ikea Billy bookcases work out up-cycled on this project? Subscribe to make sure you don’t miss a thing - http://bit.ly/10MWsubscribe
+++++++++
Become a 10minuteworkshop Plus member and support the channel further - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Birch Ply Alternatives - https://youtu.be/-injtkjghA8
Scribing an infill - https://youtu.be/g0W23buOgoE
Scribing a Face-frame - https://youtu.be/c2IthMh47nM
Scribing to a ceiling - https://youtu.be/nba3yyJYqpM
Kreg hinge jig - https://youtu.be/0wQMkWb4DjU
Painting MDF doors - https://youtu.be/ZIwNJGlVtwc
New to track saws? Tracksaw workshop & all tracksaw-related videos in a playlist here - http://bit.ly/TracksawWorkshop
+++++++++
Handy consumables & gear:-
Browse the Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
Finger pull - small pull T7112 -1/2 https://www.wealdentool.com/cgi-bin/sh000001.pl?WD=1%20t7112%202&PN=Online_Catalogue_Small_Pull_126%2ehtml#aT7112_2d1_2f2
Adjustable cabinet feet - https://amzn.to/3XzQfJH (US: [similar] https://amzn.to/3Xranh6)
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at benchdogs.co.uk
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs carpenter’s square (gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?ref=1x_p0bagtnr)
Benchdogs precision triangle/square (Gifted) - https://bit.ly/precisiontriangle
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
Polyvine Polyten PVA - https://amzn.to/2EY9Dgf (US(crazy price, just for reference) https://amzn.to/2Tm7RsC)
Tongue depressors (waxing spatulas) - https://amzn.to/2zpHlp8 (US: similar) https://amzn.to/2S1QLP7)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Nailer and Stapler Basics [video 485]](https://i.ytimg.com/vi/nVta5PEetzE/hqdefault.jpg "Nailer and Stapler Basics [video 485]
In this video I cut through the confusion of a jargon-filled #nailer and #stapler landscape to help make sure you spend your hard-earned on the right #tool for the job you have in mind. Enjoy!
NB: I own all the tools shown in this video; I am not recommending or endorsing any particular brand, and have not been paid to include these brands in this video.
Special thanks to @RobinClevett for the on-site video of a nailer in action! 🙌 Check out Robin’s channel here - https://www.youtube.com/c/ukconstruction
See below for the specific videos referenced.
How to trim a roof window - https://www.youtube.com/watch?v=UZbN0aS6EqU&t=835s
Valley roof construction - https://www.youtube.com/watch?v=tDY53bGGGWI
Super-flush joist hangers - https://www.youtube.com/watch?v=llazbOswIhU
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos of interest:-
Basics playlist; all my ‘basics’ videos in one place - https://bit.ly/woodworkbasics
Jointing systems playlist - http://bit.ly/JointingSystems
My Cheap Nailer and Compressor - https://youtu.be/eJo3JMkv3JE
My last install - https://youtu.be/B9qHsXC9MAQ
My biggest mistake - https://youtu.be/LZTurbJ3uAU
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Featured/mentioned in this video:-
Hyundai 8-litre quiet compressor - https://amzn.to/398TyB7 (US: nope, sorry)
Silverline 18g nailer - https://amzn.to/3sfcZ2S (US: [similar] https://amzn.to/3rjJR9u)
18g nail mixed pack - https://amzn.to/3lGRIfW (US: [similar] https://amzn.to/3ccvrmW)
Silverline nailer/stapler - https://amzn.to/3rGorF4 (US:[similar] https://amzn.to/3f97sGE)
Maestri ME606 electric nailer/stapler - http://amzn.to/2pNm7ye (US: http://amzn.to/2pGMfuf)
Ryobi Airstrike 18g nailer (bare tool) - https://amzn.to/37oe5AF (US [full set]; https://amzn.to/3fdptTZ)
Fisch brad point bit set - https://amzn.to/3ewSUQK (US:[similar] https://amzn.to/2OcuWKX)
Long Brad point bit set [similar] - https://amzn.to/3im84t6 (US:[similar] https://amzn.to/3ez2670)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Pocket-money DIY Railstop [video 570]](https://i.ytimg.com/vi/nWpSFoKJXeg/hqdefault.jpg "Pocket-money DIY Railstop [video 570]
In this one I’m making a super-simple and cheap DIY rail stop. Enjoy!
Register an interest in 10MW products at 10minutejigs.com * or directly with this link:-
https://tenminuteworkshop.myflodesk.com/is2eafpl87
*If you were an early adopter of the 10MW Loose Tenon Jig you might find that the .com link redirects to the old site; please use the direct link above to register an interest, and please clear your browser cache - it’s been a couple of years!
+++++++++
Sign up for the free newsletter at 10minuteworkshop.email or 10MW.email to stay in touch and get the all the 10MW factsheets, included in the next issue.
Can’t wait? Become a 10minuteworkshop Plus member* and get the factsheets, free plans and other exclusive member content right away - more details at 10minuteworkshop.com, or sign up directly at 10minuteworkshop.plus
*Behind the Scenes, Marking Out and At the Bench members have instant access as part of their subscription
Please note that I have moved away from legacy member platforms to concentrate on my own memberships at 10MinuteWorkshop Plus; member benefits at Patreon and YTM have been significantly reduced since October 2022.
+++++++++
Visit the 10MinuteWorkshop store for 10MW Products and project plans, at www.10minute.shop or in the product shelf directly beneath this video.
+++++++++
Heads up; as an Amazon Associate, an eBay Partner Network member, a Trend UK, Benchdogs UK, O3Adhesives and Rennie Tools affiliate, I will earn from qualifying purchases made through these links, and many thanks if you do.
Browse my Amazon store at 10MinuteAmazon.com
Benchdogs. Use offer code 10minuteworkshop at checkout for 5% discount across the board at https://benchdogs.co.uk/?ref=1x_p0bagtnr
+++++++++
Other videos and playlists of interest:-
Any Router, Any Rail - https://youtu.be/zzbS0yObBhk
DIY SYS-TOTE - https://youtu.be/vhW04TJCgMU
Bargain or Burden; first look at woodcrafts ‘MFT’ - https://youtu.be/pqy8IUnLDY4
3 MFT Rail Hinges - https://youtu.be/ywQoSh7G8KE
DIY Rail Hinge - https://youtu.be/sHj5G6t1qvY
MFT & MFT-related Playlist - http://bit.ly/MFT-related
Basic Builds Playlist - https://bit.ly/BasicBuilds
My Last Build & Install - https://bit.ly/MyLastBuild
Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
+++++++++
Useful links:
Browse the 10MW Everyday Workshop Essentials list here - https://amzn.to/3KLNIaM
Visit my Amazon store here - 10MinuteAmazon.com
T-bolts, M8 x 25mm - https://amzn.to/4dcm3gA
Star knob, M8 x 31mm - https://amzn.to/4dcUS5l
Wingnut, M8 - https://amzn.to/44dXo7h
Roofing bolt M8 - https://amzn.to/3JtFZhk
Plywood A4 sheet hobby packs - https://amzn.to/4d3bg8H
3M strong double-sided tape - https://amzn.to/3u2Ekqw
Bessey DuoKlamp - https://amzn.to/3eDz1Ig
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH
Hinge drilling guide (used as a saddle square) - https://amzn.to/48jp0ty
Stainless steel graphics knife, Olfa SAC-1 - https://amzn.to/3DnWzvJ
BicMatic Fine point 0.5mm pencils - https://amzn.to/3uldrlX
Bosch professional 30mm forsnter bit - https://amzn.to/3SRIUmS
Benchdogs products gifted without obligation:-
Benchdogs precision rulers (Gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs Precision triangle (Gifted) - https://benchdogs.co.uk/collections/precision-triangles/products/precision-triangle-bd450pt?ref=1x_p0bagtnr
Benchdogs carpenters square (Gifted) - https://benchdogs.co.uk/products/175mm-carpenter-square?_pos=1&_sid=4a2a8233f&_ss=r&ref=1x_p0bagtnr
Benchdogs Ultra COMBI Max square - https://benchdogs.co.uk/products/ultra-combi-max-square-320mm?ref=1x_p0bagtnr
Benchdogs precision rulers (gifted) - https://benchdogs.co.uk/collections/rulers?ref=1x_p0bagtnr
Benchdogs precision squares (gifted)- https://benchdogs.co.uk/products/stainless-steel-square-300?ref=1x_p0bagtnr
Benchdogs CSC SYS Fence (gifted) - https://benchdogs.co.uk/collections/csc-fence-and-adaptor-plate/products/csc-fence-and-adaptor-plate?ref=1x_p0bagtnr")
![Aldi Ferrex 10” Bandsaw 12 months on [video 475]](https://i.ytimg.com/vi/o65JpBZoa0s/hqdefault.jpg "Aldi Ferrex 10” Bandsaw 12 months on [video 475]
In this video I walk you around the #Aldi #Ferrex 10” #bandsaw I bought a year ago, and give you my thought and recommendations after 12 months of regular workshop use. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned:-
All About Bandsaws Playlist - http://bit.ly/AllAboutBandsaws
James’s Mancave unboxing & setup video - https://www.youtube.com/watch?v=XNdMN37G3tA
Alex Snodgrass Bandsaw setup video - https://www.youtube.com/watch?v=wGbZqWac0jU
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Aldi Ferrex 10” Bandsaw - https://www.aldi.co.uk/ferrex-bandsaw/p/810249541009800
**NB; link will be broken when item goes out of stock. You do not need to tell me about this!**
Bandsaw blade I used was the Tuffsaws SuperTuff Premium 1790 x 1/2” 6tpi - https://www.tuffsaws.co.uk/index.php?route=product/product&path=4_14_32&product_id=124
Other fine gear:-
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Festool Domino assortment - http://amzn.to/2piZjHa (US: http://amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - http://amzn.to/2oTq5CZ (US: http://amzn.to/2oOqyrL)
Domino connectors - https://amzn.to/2mV8OJu (US:https://amzn.to/2LKRDZ1)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Ultralight Portable Bench [video 434 ][Gifted/Ad**]](https://i.ytimg.com/vi/oEiiVAiBvt0/hqdefault.jpg "Ultralight Portable Bench [video 434 ][Gifted/Ad**]
In this weeks video I build an ultralight portable bench from a sheet of Poplar plywood, including the MFT-style top. Enjoy!
.
Ultralight portable bench plans on Etsy, includes full step-by-step video - http://bit.ly/LightweightBench
18mm to 12mm cut-list ‘translation’ - http://bit.ly/18-12mmBench
.
This video is supported by MEDITE SMARTPLY: MEDITE makes it real, discover more here: https://www.meditemakesitreal.com/?utm_source=YouTube&utm_medium=Influencer%20Video&utm_campaign=Peter%20Millard%20Q1%20Campaign
**This video may contain items that were supplied/gifted for review. I have not been paid to make this video; as an affiliate I may earn from qualifying sales.
.
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
.
https://bit.ly/bench-dogs
http://bit.ly/raildogs
.
++++++++
Other videos mentioned:-
402 Rail square - https://youtu.be/qik-UoZUAgg
420 Benchdogs fence - https://youtu.be/KXBdxdeM_3Y
422 Square Cuts: MFT or Rail Square? - https://youtu.be/3C8XSWliOys
424 LR32 MFT - https://youtu.be/C_J-PKrUo1Y
426 Portable Bench - https://youtu.be/7OqrljJHOaw
Kingpost Timberworks - https://www.youtube.com/c/kingposttimberworks
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
If you’re looking for a few gift ideas and would like to support the channel then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
See the channel blog for more direct links - http://bit.ly/10minuteBlog
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
++++++++
Used/featured in this video:-
Folding leg brackets - https://amzn.to/3q24tTH (US: [similar] https://amzn.to/3mZJ6k7)
Strap handle - https://amzn.to/36blVwn (US: [similar] https://amzn.to/3p1l5ec)
Buttonfix - https://amzn.to/2JIXa35 (US: http://bit.ly/buttonfix_US)
Peanut 2 connector system - http://bit.ly/Peanut2connector
Benchdogs Rail Dogs - http://bit.ly/raildogs
Trend MFT router jig - https://amzn.to/34wSp3b
Benchdogs rail square - https://bit.ly/bench-dogs
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Bessey Duo Klamp - http://amzn.to/2tsSWQs (US:http://amzn.to/2sVaRBH)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
++++++++
Other useful gear…
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Granat abrasive - http://amzn.to/2A3c1vW (US: http://amzn.to/2gPAAUz)
Festool RTS 400 - http://amzn.to/2x6zGZW (US: http://amzn.to/2i84yXn)
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Festool ETS 150/5 - http://amzn.to/2sapsq9 (US: http://amzn.to/2ssbZgq)
Festool CTL Sys - http://amzn.to/2sKa2t3 (US: http://amzn.to/2tCvVdZ)
Festool CTL SYS Bags - https://amzn.to/2G9eFVd (US: https://amzn.to/2GduBpo)
Trend Air Stealth Facemask - https://amzn.to/2zah0P6 (US: https://amzn.to/2T5ww6X)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
Silicone brush set - http://amzn.to/2guo6Sm (US: http://amzn.to/2yEWbZI)
Silicone brush (single) - http://amzn.to/2l5rNTD (US: http://amzn.to/2zqFaQl)
Polyvine PolyTen PVA - http://amzn.to/2svT03N (US: http://amzn.to/2rmHYL3)")
![Old House, New Window [video 456]](https://i.ytimg.com/vi/oMVpiBlu110/hqdefault.jpg "Old House, New Window [video 456]
In this mostly vlog-style video I stray into uncharted #DIY waters when I replace my first ever double-glazed #window in my #Victorian house. Enjoy!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Other videos mentioned in passing:-
10 tools I wish I had at the start - https://youtu.be/enmHfvgRTrw
5 Festool gamechangers - https://youtu.be/R9a1qzLsjFA
Cabinetry Basics P3 - https://youtu.be/iKle2JqhEV8
Basic Plywood boxes - https://youtu.be/li5AIXw3XPE
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Used/featured in this video:-
Soudal expanding foam - https://amzn.to/3ePaKiv (US: [similar] https://amzn.to/3wevshH)
Clear silicone sealant - https://amzn.to/3ok0KRf (US: [similar] https://amzn.to/33Nzn8I)
Everbuild Lumberjack 5-minute PU adhesive - https://amzn.to/2rSAAMn (US: nope)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool CXS - http://amzn.to/2syMO8Z (US: http://amzn.to/2r0TZ7U)
Recipe saw blade handle - [similar] https://amzn.to/2SSGFpH (US: nope, sorry.)
Other useful gear:-
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Spax screws - http://amzn.to/2oYWydc (US: http://amzn.to/2oOjkDT)
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
![Trend T12 - First impressions [video 489][Gifted**]](https://i.ytimg.com/vi/p_MJny9rZqE/hqdefault.jpg "Trend T12 - First impressions [video 489][Gifted**]
This is a first look at the #Trend #T12 #router - the T12 and T14 are the first routers Ive seen that have been refigured to comply with the legislation that came in last year, and that I discussed during my router bench build. Long story short, all new routers need to have the equivalencies of an NVR switch built into them, and this makes it challenging to use them in a router table.
Trend’s solution is two models, one for hand-held use, and one made for table-mounting, and in this video I take a quick look at the hand-held Trend T12.
**This product was supplied by Trend for Review. I have not been paid by Trend to make this video or to say nice things about the product. I have no financial interest in this product, or in Trend Tools and Technology. Find the full spec of the T12 router here - https://bit.ly/TrendT12.
+++++++
IEC 62841-2-17:2017 Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-17: Particular requirements for hand-held routers can be found here - https://webstore.iec.ch/publication/3...
About that legislation…
OK, so I had many, many questions about this and I only know what I’ve been told; its really hard to get solid information on the legislation without buying a copy pf the IEC standard (link above, ~£120 - feel free to go ahead and tell me what you find...) but from what Im told, the legislation is really for manufacturers, it doesnt effect legacy routers, only new sales, and retailers have 12 months to sell their existing stock.
The legislation came into force on December 21st last year, and the principle change is the addition of a built-in equivalent of an NVR switch, which would make routers difficult to use in a table. There was talk apparently of expanding the reach to include routers used in professional workshops, but that seems to have been dropped as Id imagine it would be impossible to police or enforce.
Thats all I know!
+++++++++
Become a 10 Minute Workshop YouTube Member for exclusive content - http://bit.ly/10minuteMember
Visit my Patreon channel for exclusive content - http://www.patreon.com/10minuteworkshop
Support the channel directly - http://bit.ly/donate_to_10minuteworkshop
+++++++++
Videos mentioned / of interest
Torsion Box Router Bench Build - https://youtu.be/Q-Vyq4ShHT0
Router bench Teardown - https://youtu.be/hRCSoNlQFew
Badger Workshop - https://www.youtube.com/c/Badgerworkshop
Hand-i-craft - https://www.youtube.com/channel/UCsjajInRuovnCnw9tHfSXVA
Extrusion Confusion - a guide to MFT hardware - https://youtu.be/za5B-XrSuH0
3 Easy Wins; New Benchtops - https://youtu.be/XVSp9yDmGYM
LR32MFT - https://youtu.be/C_J-PKrUo1Y
+++++++++
If you’re looking for a few gift ideas then take a look at my Etsy store, my Amazon Affiliate store, or any of the links below.
My Etsy - http://bit.ly/10minuteShop
Amazon store - http://bit.ly/10minuteworkshop
My ‘social’ links & contacts in one place - https://www.10minuteworkshop.com/links
Full list of ‘Stuff I use’ at Full list of ‘Stuff I use’ at https://www.10minuteworkshop.com
Connect with me on twitter @10minuteshop
Connect with me on Instagram @10minuteworkshop
+++++++
Heads up; as an Amazon Associate, and an eBay Partner Network member, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something [similar] has been linked to instead.
Amazon UK - https://www.amazon.co.uk/shop/petermillard1
eBay UK - http://bit.ly/Buy_eBay_UK
++++++++
Handy gear:-
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Benchdogs rail square - https://bit.ly/bench-dogs
Benchdogs precision triangle/square - https://bit.ly/precisiontriangle
Festool PDC 18/4 - http://amzn.to/2s3J0eq (US: http://amzn.to/2tWUHEL)
Festool Domino - http://amzn.to/2pVSnMk (US: http://amzn.to/2o7E22Q)
Bessey DuoKlamp - https://amzn.to/3eDz1Ig (US: https://amzn.to/3w1s1dM)
Festool lever clamp - http://amzn.to/2pOohLD (US: http://amzn.to/2pnFZIM)
Festool MFT - https://amzn.to/2x49HHE (US: https://amzn.to/2J25aKy)
Festool Midi extractor - http://amzn.to/2tCIN3Q (US: http://amzn.to/2rKNIOx)
Festool TS55 Tracksaw - http://amzn.to/2pGvzDS (US: http://amzn.to/2oOgGhw)
Festool T18 drill/driver - https://amzn.to/2QAHpK1 (US: https://amzn.to/2RPuOCR)
Hultafors Talmeter tape measure - http://amzn.to/2pHwnbH (US: http://amzn.to/2oqLQc9)
Moldex 6810 in-ear defenders - https://amzn.to/2P2c5nP (US:https://amzn.to/2LgIsye)
Mirock square - https://etsy.me/2MC0RT
Mirock 500mm T-ruler - https://etsy.me/365P0KE
Bahco 6” combi square - http://amzn.to/2oumhX4 (US: http://amzn.to/2ouSg9k)
+++++++++")
