Paint Coatings - What happens if you wash them before they cure?  Lets test! @WaxMode
Paint Coatings - What happens if you wash them before they cure?  Lets test!  @WaxMode
Uploaded November 2019 | Updated November 2026, 3 hours ago
This is a test demonstration for what happens when you wet or wash your paint coating before it has properly cured on your paint. In this video I'm working with CarPro CQuartz UK on the left half of the hood, and McKee's 37 SiO2 Enhanced Paint Coating on the right half.

CarPro CQuartz UK: amzn.to/35CvnXR - Kit with Reload: amzn.to/2XEUwOA
McKee's 37 SiO2 Enhanced: amzn.to/35CzDGP

CarPro CQuartz UK Review: youtu.be/vDQ8q2w1sM8
McKee's 37 Paint Coating Review: youtu.be/4QVWYIegNxs

CQUK and M37 were applied 15 minutes prior to the first rinse test. Then washed 5 minutes afterwards with Meguiar's Hyper-Wash and rinsed. The panel was dried and later rinsed after waiting 24 hours. The panel was then dried and sat for an additional 24 hours (48 total) and rinsed.

Overall, you can see CQUK is more affected by the wash with Hyper-Wash compared to M37. CarPro recommends a 24 hour dry cure avoiding moisture and water. Followed up with a 5 day cure for avoiding detergents and chemicals. M37 recommends a standard 24 hour cure. An early wash and rinse does not fully prohibit the coatings' further ability to continue to cure. However, with CQUK there's more evidence that the early wash and rinse permanently reduced its maximum hydrophobic performance. M37's hydrophobics seemed less impacted by the test.

CarPro recommends an application of their Reload spray sealant can be applied 30-60 minutes after the initial application of CQuartz in order to assist in sealing the coating, and act as a barrier against damaging water spotting if moisture or water should be introduced earlier than the 24 hour recommended dry cure.

On top of this initial curing period, the actual coating can continue to cure and may not achieve maximum hardness until well after 5 days, depending on the type of coating you're working with. However it would be difficult to test for this, as the maximum hydrophobics are achieved relatively quickly within that 1-5 day period.

Disclaimer: Some of the links above may contain Amazon Affiliate links, I receive a small percentage of the sales made by clicking on these links. This helps support the channel for additional testing, I appreciate your support!
Paint Coatings - What happens if you wash them before they cure?  Lets test!How Effective are Wax & Grease Removers on Fresh Wax?  Lets Test!September 2020 Deluxe GloveBox Unboxing!Ultimate Quik Wax - Ultimate Quik Detailer - Ultimate Wash & Wax Anywhere - How they differ!Ethos Graphene Matrix Coating | Chemical Resistance TestCarPro CQUK 3.0 | CQuartz TiO₂ | 2+ Year Update & Rapidwaxx TopperMeguiars Ultimate Liquid Wax & M21 Synthetic Sealant 2.0 - WaxMode ReviewNew SONAX Brilliant Shine Detailer - Water TestOptimum Car Wax - Review & Water TestMeguiar’s Hybrid Ceramic Detailer - Perfect Topper for Coatings!Wolfgang Uber Ceramic Spray Coating - 10 Day UpdateHybrid Ceramic Liquid Wax | 4 Month Durability Update!
WaxMode |

Paint Coatings - What happens if you wash them before they cure? Let's test!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER