Uploaded January 2020 | Updated November 2026, 3 hours ago
Check out this video to see how well the new Meguiar's Hybrid Ceramic Detailer performs on some of my older, more weathered coatings that I have applied across the test Honda! Overall, Hybrid Ceramic Detailer is a fantastic coating topper, showing an incredible ability to repair and revive the tired hydrophobic behaviors of my coatings. Easy to use, incredible smell, good slickness, great gloss. This is proving to be one of my favorite products that has been released for the 2020 consumer detailing season!
Amazon Affiliate Links - Thank you for your support!
Meguiars:
Hybrid Ceramic Detailer (26oz): amzn.to/30GpjvY
Hybrid Ceramic Quik Clay Kit (18oz): amzn.to/2RFSCdY
Hybrid Ceramic Wax: amzn.to/2vbIHp4
Hybrid Ceramic Liquid Wax: amzn.to/2NMAm1y
There's a lot being covered in this test. Up until this topping test, none of the coated sections have been washed for 6 months. As a result, the first wash after this time period left me which a bunch of weathered coatings, a lot of their hydrophobic behaviors were no longer up to par and my goal was to find a topper that could repair or revive the hydrophobic elements of the coating. CQUK 3.0 was applied to the driver's side door, CQuartz applied to the rear driver's door, 20 months durability. Blackfire Pro was applied to the rear bumper at 15 months durability. Adam's Ceramic Spray Coating applied to the left side of the rear passenger door, IGL Premier on the right half of this door, 11 months durability. Meguiar's HCW was applied to the left side of the passenger's front door, Mothers CMX to the right half of this door, 11 months durability. On the hood, EXOv4 was applied to the left (passenger) side, Gliss V2 on the right half, 8 months durability.
With the CQuartz coatings and Blackfire Pro, I first applied Bead Maker to try and revive the coatings, with Reload on the left half of CQUK 3.0. Two weeks went by and I showed the rinsing after this wash. With not enough boost in performance, I decided to then apply Meguiar's Hybrid Ceramic Detailer to the entire car, waited two weeks and did a wash and rinse, with a fantastic improvement, revival, and repairing of the hydrophobic nature of the coatings.
The condition of your coating can have a large impact in the performance of your topper, this is why we see a difference in the water behaviors even though everything was topped with HCD at the same time. The condition of your paint without a coating can also have a large impact in the performance of your topper. This is why the water behavior is weak on the quarter panel areas of the cars that were never coated, compared to the coated areas that were extremely strong. Hybrid Ceramic Detailer responds incredibly well to a base layer coating.
Coatings:
CarPro CQuartz UK 3.0: amzn.to/30Imdrj
CarPro CQuartz (Original): amzn.to/30HzjVK
CarPro Gliss V2: amzn.to/36euepb
Gtechniq EXOv4: amzn.to/38xBEp7
Adam's Ceramic Spray Coating: amzn.to/2Gapvu1
Blackfire Pro Ceramic Coating: amzn.to/2NLG2so
Others:
Mothers CMX Ceramic Spray Coating: amzn.to/3ayJ7Gg
Turtle Wax Hybrid Solutions Ceramic Spray Coating: amzn.to/2GdYgyC
Turtle Wax Ice Seal N Shine: amzn.to/2TI5F1f
Gtechniq C2V3 Liquid Crystal: amzn.to/2v3mvgD
P&S Bead Maker: amzn.to/3azvE0E
Lithium Luster Lube: amzn.to/2TGn9Ls
Sonax Brilliant Shine Detailer: amzn.to/3694nio
Disclaimer: This not a sponsored video, the products used in this test were all purchased by me for individual testing. The links above are affiliate links from Amazon, a small percentage of any sales made through the links will be used to fund additional testing, thanks again for your support!
0:00 Intro
1:00 CQUK Reset Wash & Rinse - 19 Months
2:17 CQuartz Reset Wash & Rinse - 19 Months
3:07 CQUK + Reload - 19 Months
3:30 CQUK + Bead Maker - 19 Months
4:00 CQuartz + Bead Maker - 19 Months
4:40 Blackfire Pro Ceramic + Bead Maker - 15 Months
5:00 CQUK + Hybrid Ceramic Detailer - 20 Months
5:28 CQuartz + Hybrid Ceramic Detailer - 20 Months
5:53 Blackfire Pro Ceramic + HCD - 15 Months
6:11 Water Sheeting (Flooding) Test
8:11 Adam's Ceramic Spray Coating & IGL Premier + HCD - 11 Months
8:38 HCW & CMX + HCD - 11 Months
9:11 Blackfire Pro Ceramic + HCD - 15 Months
9:26 EXOv4 & Gliss V2 + HCD - 8 Months
9:51 Water Sheeting (Flooding) Test
11:57 Final Thoughts
#meguiars #hybridceramic #ceramicdetailer #autodetailing #cquartz
Check out this video to see how well the new Meguiar's Hybrid Ceramic Detailer performs on some of my older, more weathered coatings that I have applied across the test Honda! Overall, Hybrid Ceramic Detailer is a fantastic coating topper, showing an incredible ability to repair and revive the tired hydrophobic behaviors of my coatings. Easy to use, incredible smell, good slickness, great gloss. This is proving to be one of my favorite products that has been released for the 2020 consumer detailing season!
Amazon Affiliate Links - Thank you for your support!
Meguiars:
Hybrid Ceramic Detailer (26oz): amzn.to/30GpjvY
Hybrid Ceramic Quik Clay Kit (18oz): amzn.to/2RFSCdY
Hybrid Ceramic Wax: amzn.to/2vbIHp4
Hybrid Ceramic Liquid Wax: amzn.to/2NMAm1y
There's a lot being covered in this test. Up until this topping test, none of the coated sections have been washed for 6 months. As a result, the first wash after this time period left me which a bunch of weathered coatings, a lot of their hydrophobic behaviors were no longer up to par and my goal was to find a topper that could repair or revive the hydrophobic elements of the coating. CQUK 3.0 was applied to the driver's side door, CQuartz applied to the rear driver's door, 20 months durability. Blackfire Pro was applied to the rear bumper at 15 months durability. Adam's Ceramic Spray Coating applied to the left side of the rear passenger door, IGL Premier on the right half of this door, 11 months durability. Meguiar's HCW was applied to the left side of the passenger's front door, Mothers CMX to the right half of this door, 11 months durability. On the hood, EXOv4 was applied to the left (passenger) side, Gliss V2 on the right half, 8 months durability.
With the CQuartz coatings and Blackfire Pro, I first applied Bead Maker to try and revive the coatings, with Reload on the left half of CQUK 3.0. Two weeks went by and I showed the rinsing after this wash. With not enough boost in performance, I decided to then apply Meguiar's Hybrid Ceramic Detailer to the entire car, waited two weeks and did a wash and rinse, with a fantastic improvement, revival, and repairing of the hydrophobic nature of the coatings.
The condition of your coating can have a large impact in the performance of your topper, this is why we see a difference in the water behaviors even though everything was topped with HCD at the same time. The condition of your paint without a coating can also have a large impact in the performance of your topper. This is why the water behavior is weak on the quarter panel areas of the cars that were never coated, compared to the coated areas that were extremely strong. Hybrid Ceramic Detailer responds incredibly well to a base layer coating.
Coatings:
CarPro CQuartz UK 3.0: amzn.to/30Imdrj
CarPro CQuartz (Original): amzn.to/30HzjVK
CarPro Gliss V2: amzn.to/36euepb
Gtechniq EXOv4: amzn.to/38xBEp7
Adam's Ceramic Spray Coating: amzn.to/2Gapvu1
Blackfire Pro Ceramic Coating: amzn.to/2NLG2so
Others:
Mothers CMX Ceramic Spray Coating: amzn.to/3ayJ7Gg
Turtle Wax Hybrid Solutions Ceramic Spray Coating: amzn.to/2GdYgyC
Turtle Wax Ice Seal N Shine: amzn.to/2TI5F1f
Gtechniq C2V3 Liquid Crystal: amzn.to/2v3mvgD
P&S Bead Maker: amzn.to/3azvE0E
Lithium Luster Lube: amzn.to/2TGn9Ls
Sonax Brilliant Shine Detailer: amzn.to/3694nio
Disclaimer: This not a sponsored video, the products used in this test were all purchased by me for individual testing. The links above are affiliate links from Amazon, a small percentage of any sales made through the links will be used to fund additional testing, thanks again for your support!
0:00 Intro
1:00 CQUK Reset Wash & Rinse - 19 Months
2:17 CQuartz Reset Wash & Rinse - 19 Months
3:07 CQUK + Reload - 19 Months
3:30 CQUK + Bead Maker - 19 Months
4:00 CQuartz + Bead Maker - 19 Months
4:40 Blackfire Pro Ceramic + Bead Maker - 15 Months
5:00 CQUK + Hybrid Ceramic Detailer - 20 Months
5:28 CQuartz + Hybrid Ceramic Detailer - 20 Months
5:53 Blackfire Pro Ceramic + HCD - 15 Months
6:11 Water Sheeting (Flooding) Test
8:11 Adam's Ceramic Spray Coating & IGL Premier + HCD - 11 Months
8:38 HCW & CMX + HCD - 11 Months
9:11 Blackfire Pro Ceramic + HCD - 15 Months
9:26 EXOv4 & Gliss V2 + HCD - 8 Months
9:51 Water Sheeting (Flooding) Test
11:57 Final Thoughts
#meguiars #hybridceramic #ceramicdetailer #autodetailing #cquartz










