Uploaded August 2020 | Updated November 2026, 3 hours ago
This is a first wash video for the new Ethos Graphene Matrix Coating. I applied two coats to the entire rear section of the blue test Honda, officially beginning the durability test on this daily driver. I will continue to keep an eye on this coating and provide durability updates as time goes on.
The rear section was prepped with a thorough decontamination, testing Adam's Strip Wash followed up with a variety of different water spot removers, then CarPro's IronX, and afterwards a fine grade Nanoskin Autoscrub Sponge with McKee's 37 N-914 as a lubricant to clay and pull the embedded contamination out of the surface. The paint was then polished with abrasives using 3D One Hybrid Compound & Polish, then Sonax Perfect Finish. I followed this polishing up with Klean Strip Odorless Mineral Spirits, then Ethos Detox as a panel wipe.
Ethos Graphene Matrix Coating: ethoscarcare.com/collections/best-sellers/products/graphene
Ethos Detox: ethoscarcare.com/products/detox
3D One Hybrid Compound & Polish: amzn.to/32I5uFT
Sonax Perfect Finish: amzn.to/32G44Md
CarPro IronX: amzn.to/2QDGjyD
CarPro Reset: amzn.to/32EgdRO
Nanoskin AutoScrub Sponge: amzn.to/2QFlcft
Two coats of the Graphene Matrix Coating was applied to the rear sections, the second coat was applied 1 hour after the first coat. Surface temperatures averaged around 90°F inside of the garage during this application, I had no issues leveling the coating after applying it, it remained very easy to work with and provided a slicker surface than most coatings I've used.
The car was then pulled out of the garage and remained dry for about 1 full day before the first central Florida rains hit the coated sections. The car was then daily driven and remained ungaraged during this entire first week, enduring daily rainstorms and high heat and humidity. Prior to this first rinse, we had a light rain shower hit the area which is why there is standing water at the start of the video. The soap used to wash the paint was CarPro Reset.
Overall, the coating held up absolutely fantastic, boasting some of the best hydrophobics I've seen. It also remained relatively clean during this first week even after a good amount of driving through rain showers. I can see some spotting towards the bottom right section of the bumper during the pre-rinse popped up, however this was entirely cleaned up after the wash with Reset. I did not notice any weak or inconsistent areas of the coating after the wash & rinse, despite the application environment not being ideal, and despite the first week curing phase being a bit chaotic with regular rainstorms.
The slickness felt through the wash mitt was absolutely fantastic, the mitt really glided well across the coating. After I had dried the paint it remained slick after pulling out a clean microfiber towel over it to check.
Disclaimer: Tim at Ethos Car Care sent me this bottle of the Graphene Matrix Coating for individual testing and review, however this is not a paid sponsorship. My subscribers will always receive my honest thoughts and feedback of the products that I'm working with. The Amazon links above are affiliate links, I receive a small percentage of sales when users click and purchase these products on Amazon. The Ethos links are not affiliated.
The short term results of this coating are quite fantastic, but the true test will be to see how this coating holds up against the test of time through the elements on the daily driver. Stay tuned for additional durability update videos!
#EthosCarCare #GrapheneMatrix #HydrophobicCoating #AutoDetailing
0:00 - Intro
0:41 - First Rinse
1:41 - CarPro Reset Wash & Rinse
3:48 - Air Blower Dry
5:16 - Final Thoughts
This is a first wash video for the new Ethos Graphene Matrix Coating. I applied two coats to the entire rear section of the blue test Honda, officially beginning the durability test on this daily driver. I will continue to keep an eye on this coating and provide durability updates as time goes on.
The rear section was prepped with a thorough decontamination, testing Adam's Strip Wash followed up with a variety of different water spot removers, then CarPro's IronX, and afterwards a fine grade Nanoskin Autoscrub Sponge with McKee's 37 N-914 as a lubricant to clay and pull the embedded contamination out of the surface. The paint was then polished with abrasives using 3D One Hybrid Compound & Polish, then Sonax Perfect Finish. I followed this polishing up with Klean Strip Odorless Mineral Spirits, then Ethos Detox as a panel wipe.
Ethos Graphene Matrix Coating: ethoscarcare.com/collections/best-sellers/products/graphene
Ethos Detox: ethoscarcare.com/products/detox
3D One Hybrid Compound & Polish: amzn.to/32I5uFT
Sonax Perfect Finish: amzn.to/32G44Md
CarPro IronX: amzn.to/2QDGjyD
CarPro Reset: amzn.to/32EgdRO
Nanoskin AutoScrub Sponge: amzn.to/2QFlcft
Two coats of the Graphene Matrix Coating was applied to the rear sections, the second coat was applied 1 hour after the first coat. Surface temperatures averaged around 90°F inside of the garage during this application, I had no issues leveling the coating after applying it, it remained very easy to work with and provided a slicker surface than most coatings I've used.
The car was then pulled out of the garage and remained dry for about 1 full day before the first central Florida rains hit the coated sections. The car was then daily driven and remained ungaraged during this entire first week, enduring daily rainstorms and high heat and humidity. Prior to this first rinse, we had a light rain shower hit the area which is why there is standing water at the start of the video. The soap used to wash the paint was CarPro Reset.
Overall, the coating held up absolutely fantastic, boasting some of the best hydrophobics I've seen. It also remained relatively clean during this first week even after a good amount of driving through rain showers. I can see some spotting towards the bottom right section of the bumper during the pre-rinse popped up, however this was entirely cleaned up after the wash with Reset. I did not notice any weak or inconsistent areas of the coating after the wash & rinse, despite the application environment not being ideal, and despite the first week curing phase being a bit chaotic with regular rainstorms.
The slickness felt through the wash mitt was absolutely fantastic, the mitt really glided well across the coating. After I had dried the paint it remained slick after pulling out a clean microfiber towel over it to check.
Disclaimer: Tim at Ethos Car Care sent me this bottle of the Graphene Matrix Coating for individual testing and review, however this is not a paid sponsorship. My subscribers will always receive my honest thoughts and feedback of the products that I'm working with. The Amazon links above are affiliate links, I receive a small percentage of sales when users click and purchase these products on Amazon. The Ethos links are not affiliated.
The short term results of this coating are quite fantastic, but the true test will be to see how this coating holds up against the test of time through the elements on the daily driver. Stay tuned for additional durability update videos!
#EthosCarCare #GrapheneMatrix #HydrophobicCoating #AutoDetailing
0:00 - Intro
0:41 - First Rinse
1:41 - CarPro Reset Wash & Rinse
3:48 - Air Blower Dry
5:16 - Final Thoughts










