Uploaded March 2021 | Updated November 2026, 19 hours ago
[Scan Tools]
CHEAP bluetooth scan tool: amzn.to/3RmUZoX
Scan tool (No phone required): amzn.to/30C0IJC
[Recommend Tools]
Cheap Multimeter: amzn.to/2Oh68Hy
Crocodile Clips: amzn.to/30AxCu5
Propane Nozzle: amzn.to/3eJ8REv
Chapters:
0:00 Intro
0:15 The Purpose of This Test
1:02 What is an O2 Sensor?
4:20 Types of O2 Sensor
5:10 Test Heater Element for Resistance
6:54 Test for Voltage
--------------
Oxygen Sensors 101 - Testing O2 Sensors for Resistance and DC Voltage
SUBSCRIBE FOR MORE!
#OxygenSensors #O2Sensors #LambdaSensor
--------------
[Graphing O2 sensors]
We want to graph the UPSTREAM oxygen sensors for performance issues. They produce voltage between 0 and 0.9 volts.
We want to graph the DOWNSTREAM oxygen sensors to check the efficient of the cat. They produce voltage between 0 and 0.9 volts.
High graph/voltage - RICH (Too much fuel, too little air)
Low graph/voltage - LEAN (Too much air, too little fuel)
Erratic graph / No graph / no voltage - Failing O2 sensor
[How Many? - TYPICAL Example]
A V6 has 6 cylinders, with 2 cylinder heads. A cylinder head groups a row of cylinders, so 3 cylinders per head in this example. The exhaust manifold captures the exhaust as a result of the engine combustion at each head. So on a V6, you have 2 exhaust manifolds. The vehicle manufacturer decides how this exhaust is processed and exited from the vehicle. It could be combined into one tailpipe, two or four for example.
Usually each exhaust manifold will have it's own set of O2 sensors and a catalytic converter.
So on a V6 or V8, there is typically 4 total O2 sensors.
[How to]
RULE:
- When the car is COLD, the O2 sensors will flat line (not oscillate / no amplitude).
- As the car heats up, and the O2 sensors heat up, the voltage output begins to oscillate until they reach their temperature of around 600F.
1. Get the car to operating temperature. This ensures the readings are accurate. The engine will go into CLOSED LOOP when warm, this is where the engine listens to the O2 sensors to adjust the air/fuel ratio.
2. For performance issues, we want to test all UPSTREAM sensors, so BANK X Sensor 1 (upstream/precat/etc) as these provide feedback to the ECU to adjust the air/fuel ratio based off their voltage readings.
NOTE: The good thing about having two UPSTREAM sensors is that you have a point of comparison.
3. Check the graphs are making sharp continuous sine waves, like spikes oscillating. When giving gas, the spikes will happen MORE frequently and it'll be more condensed. The graph will typically go from 0.01v to 0.9v
[Interpreting the Results]
- The actual engine code gives you the first clue. Is it a low voltage issue? General malfunction? Heater circuit malfunction?
- Solid line can mean a dead sensor or sensor failure (Assuming the car is warm)
- If the spikes are LESS frequent, you have a slow response condition.
- No voltage, dead sensor or wiring (May throw a specific code for this issue.)
These terms are all one and the same:
Front O2 sensors
upstream
Bank X Sensor 1
pre-cat
before cat
manifold
These are all one and the same:
Rear O2 sensors
downstream
Bank X Sensor 2
after cat
post-cat
Example O2 Codes:
P0130,P0131,P0132,P0133,P0134,P0135,P0136,P0137,P0138,P0139,P0140,P0141,P0142,P01403,P01404,P01405,P01406,P0147
Video Title: Oxygen Sensors 101 - Testing O2 Sensors for Resistance and DC Voltage
Video File Created Date: 01 January 1601 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your YouTube videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader
-- GinkoSolutions.com
Video Tags:
oxygen, sensors, 101, testing, o2, resistance, dc, voltage, upstream, downstream, o2 sensors, oxygen sensors, bank 1 sensor 1, bank, sensor, precat, pre-cat, slow response, o2 sensor, o2 sensor replacement, o2 sensor symptoms, oxygen sensor, oxygen sensor symptoms, oxygen sensor replacement, oxygen sensor bank 1 sensor 2, oxygen sensor cleaning, oxygen sensor test, how to test oxygen sensors, p0130, p0131, p0132, p0133, p0134, p0135, how to, lambda sensors
[Scan Tools]
CHEAP bluetooth scan tool: amzn.to/3RmUZoX
Scan tool (No phone required): amzn.to/30C0IJC
[Recommend Tools]
Cheap Multimeter: amzn.to/2Oh68Hy
Crocodile Clips: amzn.to/30AxCu5
Propane Nozzle: amzn.to/3eJ8REv
Chapters:
0:00 Intro
0:15 The Purpose of This Test
1:02 What is an O2 Sensor?
4:20 Types of O2 Sensor
5:10 Test Heater Element for Resistance
6:54 Test for Voltage
--------------
Oxygen Sensors 101 - Testing O2 Sensors for Resistance and DC Voltage
SUBSCRIBE FOR MORE!
#OxygenSensors #O2Sensors #LambdaSensor
--------------
[Graphing O2 sensors]
We want to graph the UPSTREAM oxygen sensors for performance issues. They produce voltage between 0 and 0.9 volts.
We want to graph the DOWNSTREAM oxygen sensors to check the efficient of the cat. They produce voltage between 0 and 0.9 volts.
High graph/voltage - RICH (Too much fuel, too little air)
Low graph/voltage - LEAN (Too much air, too little fuel)
Erratic graph / No graph / no voltage - Failing O2 sensor
[How Many? - TYPICAL Example]
A V6 has 6 cylinders, with 2 cylinder heads. A cylinder head groups a row of cylinders, so 3 cylinders per head in this example. The exhaust manifold captures the exhaust as a result of the engine combustion at each head. So on a V6, you have 2 exhaust manifolds. The vehicle manufacturer decides how this exhaust is processed and exited from the vehicle. It could be combined into one tailpipe, two or four for example.
Usually each exhaust manifold will have it's own set of O2 sensors and a catalytic converter.
So on a V6 or V8, there is typically 4 total O2 sensors.
[How to]
RULE:
- When the car is COLD, the O2 sensors will flat line (not oscillate / no amplitude).
- As the car heats up, and the O2 sensors heat up, the voltage output begins to oscillate until they reach their temperature of around 600F.
1. Get the car to operating temperature. This ensures the readings are accurate. The engine will go into CLOSED LOOP when warm, this is where the engine listens to the O2 sensors to adjust the air/fuel ratio.
2. For performance issues, we want to test all UPSTREAM sensors, so BANK X Sensor 1 (upstream/precat/etc) as these provide feedback to the ECU to adjust the air/fuel ratio based off their voltage readings.
NOTE: The good thing about having two UPSTREAM sensors is that you have a point of comparison.
3. Check the graphs are making sharp continuous sine waves, like spikes oscillating. When giving gas, the spikes will happen MORE frequently and it'll be more condensed. The graph will typically go from 0.01v to 0.9v
[Interpreting the Results]
- The actual engine code gives you the first clue. Is it a low voltage issue? General malfunction? Heater circuit malfunction?
- Solid line can mean a dead sensor or sensor failure (Assuming the car is warm)
- If the spikes are LESS frequent, you have a slow response condition.
- No voltage, dead sensor or wiring (May throw a specific code for this issue.)
These terms are all one and the same:
Front O2 sensors
upstream
Bank X Sensor 1
pre-cat
before cat
manifold
These are all one and the same:
Rear O2 sensors
downstream
Bank X Sensor 2
after cat
post-cat
Example O2 Codes:
P0130,P0131,P0132,P0133,P0134,P0135,P0136,P0137,P0138,P0139,P0140,P0141,P0142,P01403,P01404,P01405,P01406,P0147
Video Title: Oxygen Sensors 101 - Testing O2 Sensors for Resistance and DC Voltage
Video File Created Date: 01 January 1601 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your YouTube videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader
-- GinkoSolutions.com
Video Tags:
oxygen, sensors, 101, testing, o2, resistance, dc, voltage, upstream, downstream, o2 sensors, oxygen sensors, bank 1 sensor 1, bank, sensor, precat, pre-cat, slow response, o2 sensor, o2 sensor replacement, o2 sensor symptoms, oxygen sensor, oxygen sensor symptoms, oxygen sensor replacement, oxygen sensor bank 1 sensor 2, oxygen sensor cleaning, oxygen sensor test, how to test oxygen sensors, p0130, p0131, p0132, p0133, p0134, p0135, how to, lambda sensors





![Retrobrite: The SECRET to Restoring Yellowed Electronics and Consoles
Full video:
How To Remove Yellowing From Plastic | 3% H2O2 | Retrobrite ULTIMATE GUIDE
https://www.youtube.com/watch?v=bJZSrRU1xt4
-
Do you want to restore your yellow plastics back to their original glory? If so, keep watching!
In this video well be restoring yellowed plastics back to their original color.
Restoring yellowed plastics is sometimes known as Retro brighting, as its usually retro items which have become discolored, and we want to brighten them up again.
Retrobriting is a hot topic of debate, but the truth is, very few people have done proper testing on this subject matter, especially observing the results over long periods of time.
I did a lot of experimenting in this video and learned a lot along the way. I have shared some of this experimenting as well as my mistakes so that we can learn from this together.
In this video well be discussing:
- Why this happens
- What types of plastics will this work on?
- How to actually restore the plastics (The process)
- Something I learned and tried along the way.
- How long will this process last?
All with a primary aim of: making the process easy and also keeping things cheap and accessible.
- Hydrogen peroxide counteracts the oxidization, because it itself is an oxidizer (an oxidizing agent!). Hydrogen peroxide is one of the best oxidizing agents known to man!
- The UV light converts the hydrogen peroxide into highly reactive hydroxyl radicals, which then decompose the problematic substances.
[UV Light Wavelengths]
UVC - 200-280nm (Shortest wavelength. Classed as dangerous rays. These dont penetrate the earths ozone layer.)
UVB - 280-315nm (Mid wavelength. Causes sunburn and skin cancer etc. Classed as burning rays.)
UVA (Longest wavelength - Reaches deep inside tissue and skin, causing aging. Classed as tanning rays)
315-350nm - Uses to cure polymers. Used in printers and some tanning equipment
350-270nm - Blacklight. For bug attraction, sun tanning. etc.
370-400nm - Blacklight blue (BLB). Glow in the dark lighting. Bank note forgery checkers.
#Retrobrite #Retrobright #Retrobrighting Retrobrite: The SECRET to Restoring Yellowed Electronics and Consoles](https://i.ytimg.com/vi/X-2bwtn1uqM/mqdefault.jpg)
![Brake Hose Replacement with Brake Bleeding
***** USA (United States) Purchase Links *****
[Tools for this video]
Rust Eater Deep Penetrating Oil: https://amzn.to/46UgKiN
[Jack + Jack Stands]
3-ton Jack Stands: https://amzn.to/37v2GCM
6-ton Jack Stands (Heavy Duty): https://amzn.to/3rJRcSE
1.5 Ton Jack (Cheap): https://amzn.to/3jZGXWb
2.5 Ton Jack (Mid-Range): https://amzn.to/3jXyvXr
2.5 Ton Jack (Low Profile - For Low Cars): https://amzn.to/3xIgwwb
3.5 Ton Jack (Heavy Duty): https://amzn.to/3PumSL2
[Misc Tools]
U-Joint Set: 1/4, 3/8 and 1/2 Drive: https://amzn.to/3ambTvs
9pc Socket Extension Set: 1/4, 3/8 and 1/2 Drive: https://amzn.to/3pnvQGz
Metric Wrench Set 8mm - 22mm: https://amzn.to/4uINOWH
Socket Set 123pc Metric and Imperial - Good Quality: https://amzn.to/2NhqhL9
Socket Set Metric/SAE 23pc - Good Quality: https://amzn.to/3OuUHVS
BECOME A MEMBER OF OUR CHANNEL!
If you become a member of our channel, you get various cool and unique benefits!
Benefits:
- Early access to new videos
- A personalized shoutout in each new video during your membership
- Priority responses to your videos comments
- Access to a cool and unique emoji set
Join here: https://www.youtube.com/channel/UC0HkS2-1Tk1ULQJj3uGbjdw/join
Instagram: https://www.instagram.com/tutorialgenius
Brake Hose Replacement with Brake Bleeding
The car in the video is a Smart FORFOUR PULSE RHD 2006 1499cc (1.5L) 80Kw (454032). However, the procedures shown in the video will apply to most vehicles and applications.
SUBSCRIBE FOR MORE!
#BrakeHose #BrakeBleeding #ASMR #shorts
Video Title: Brake Hose Replacement with Brake Bleeding
Video File Created Date: 01 January 1601 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
Manage and Auto-Tag your YouTube videos offline... Then upload!
http://ginkosolutions.com/youtube-bulk-uploader/
GinkoSolutions.com
Video Tags:
brake, hose, replacement, bleeding, brake bleeding, brake fluid bleeding, brake fluid, asmr, auto repair, auto repair asmr, car repair asmr, car repair, tutorialgenius, tutorial genius, brake flushing, brake flush, collapsed brake cable, collapsed brakes, brake pedal goes to the floor, brake pedal on the floor, brake pedal doesnt work, brakes dont work, car brakes dont work, brake service, car brakes, fix car brakes, brakes not working, smart forfour, smart car Brake Hose Replacement with Brake Bleeding](https://i.ytimg.com/vi/X725oazm6B4/mqdefault.jpg)



![EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
[Parts/Tools]
Part from the Video: https://amzn.to/3hFC6bb
Flathead Screwdriver: https://amzn.to/3KgIp1r
Instagram: https://www.instagram.com/tutorialgenius
EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
The car in the video is a SATURN VUE 2007 AWD (04-07 for SATURN VUE 3.5L V6 SOHC 24V VIN CODE 4 J35 / L66). However, the procedures shown in the video will apply to most vehicles and applications.
SUBSCRIBE FOR MORE!
#GasSprings #GasStruts #LiftSupports
Tags:
How to replace Trunk Struts lift supports for any vehicle
2006 LS430 Hood And Trunk Lift Support Replacement How To
Fix Hatch/Hood/Trunk lift support DIY - Simple Easy Cheap Fast Gas Strut Lift Support replacement
How to change trunk lift supports
How to change the Hood and Trunk support struts / lift supports | Ls 430
How to Clean and Lubricate Trunk, Hood, or Hatch Struts
How to Replace Tailgate Lift Support Struts
Video Title: EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
Video File Created Date: Wednesday, 2 March, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
Manage and Auto-Tag your YouTube videos offline... Then upload!
http://ginkosolutions.com/youtube-bulk-uploader/
GinkoSolutions.com
Video Tags:
easy, fix, trunk, hood, or, lift, support, gas, spring, replacement, trunk supports, gas springs, gas struts, how to replace, trunk struts, trunk lift support, hood lift support, support struts, tailgate lift, how to, diy, gas spring replacement, trunk lift support replacement, gas strut replacement, lift supports, saturn vue, tailgate supports, lift support replacement, how to replace gas springs, gas shocks EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement](https://i.ytimg.com/vi/XjgPXhOMm-w/mqdefault.jpg)