Uploaded July 2022 | Updated November 2026, 5 days ago
I was visiting family in the UK and the owner wanted to show me something from a different time! I thought it would be something cool to see and a little different. So here we are!
-------
The Rolls-Royce 20/25 was the second of Rolls-Royce Ltd's pre-war entry level models. Built between 1929 and 1936, it was tremendously popular, becoming the most successful selling inter-war Rolls-Royce. Its success enabled Rolls-Royce to survive the economic difficulties of the Great Depression years and remain one of world's great brands. A total of 3,827 20/25s were produced, of which over 70% are still on the road today.
The 20/25 was the successor of the highly successful 20 hp Rolls-Royce Twenty introduced in 1922. The target market for the 20/25 was the same as the Twenty – the luxury, owner driver market. The project to develop the next generation 20 hp was code named Goshawk. The goal for the new model was to increase power & performance. This was achieved by increasing the bore size from 3 to 3.25 inches. The stroke was unchanged at 4.5 inches. This resulted in a 17% increase in capacity from 3128 to 3675cc – bring the RAC rating up to 25.4 hp.
The new 20/25 model was debuted at the 1929 Olympia Motor Show and proved to be tremendously popular becoming the greatest of the inter-war successes. There were 3827 20/25 hp produced – over twice the number of its contemporary sibling the Phantom II. The popularity of the 20/25 saved Rolls-Royce Limited during the pre-war economically difficult years. Ultimately 20/25 model was replaced by the 25/30 model in 1936 in which the bore was further increased to 3.5 inches. In 1938 the 25/30 was given a new chassis with independent front suspension and was renamed the Wraith.
Technical Specification:
Engine: In-line 6-cylinder, overhead pushrod operated valve engine with 3699cc capacity. Separate cast iron block and aluminum crankcase with detachable cast iron 6-plug head. It has an 82 mm bore with a 114 mm stroke. 7-bearing crankshaft with vibration damper. Pressure fed lubrication with relief valve feeding rocker shaft and timing gears.
Ignition System: Independent coil and standby magneto systems. 12V system 50 Amp/Hrs battery. Centrifugal advance with hand override. Distributor gap 0.017-0.021inches
Cooling System: The famous Rolls-Royce radiator with triangular top with vertical louvres, the angle of which can be adjusted to control engine cooling. To begin with, the radiator shutters were operated manually via a lever on the dash; after 1931 cars were fitted with automatic control via a thermostat. Engine driven centrifugal pump and belt-driven fan.
Carburation: A single Rolls-Royce 2-jet type with starting carburetor, automatic air valve and steering column control.
Fuel: 14 gallon rear tank increased to 18 gallon tank starting in 1932. Autovac (vacuum fed) fuel pump and an electric fuel gauge (starting in 1933).
Transmission: 4-speed gearbox, synchromesh in 3rd and top from 1932. Right hand gearchange. Single dry plate clutch. Open drive propeller shaft.
Suspension: Semi-elliptic leaf springs front and rear. Hydraulic dampers.
Brakes: Internal expanding 4 wheel operation with independent handbrake on the rear wheels. Mechanical servo motor driven from the gearbox.
Chassis lubrication: "One-Shot" Bijur centralized chassis lubrication system.
Steering: Worm and nut. (1936, Marles cam and roller - GTK 42)
1934
Single-jet expanding carburetor
Air silencer
Needle-bearing propeller shaft
Ride Control
DWS permanent jacks
Based on an Autocar Test, June 1935 on a Hooper closed-coupled Sports Saloon:
Acceleration
From rest to 50 mph through gears in 21.0 sec
From rest to 60 mph through gears in 31.4 sec
Best timed speed: 76.27 mph
Maximum Speeds in gears:
1st – 18 mph
2nd – 32 mph
3rd – 53 mph
4th – 76 mph
Petrol Consumption: Driven Hard – 14 mpg
#RollsRoyce #SportsSaloon #1934
Video Title: 1934 Rolls-Royce Sports Saloon 3499cc (My Friends Dream Car in the UK)
Video File Created Date: Monday, 14 March, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your YouTube videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader
-- GinkoSolutions.com
Video Tags:
rolls-royce, 1934, sports, saloon, 3499cc, my, friends, dream, car, in, the, uk, rolls-royce 1934 sports saloon 3499cc, rolls-royce 1934, freestone and webb, rolls-royce phantom, rolls-royce phantom ii, rolls-royce 20/25, bentley motors, rolls-royce sports saloon, uk cars, classic cars, classic uk cars, rolls royce, rolls-royce car, rolls-royce cullinan, rolls-royce ghost, rolls-royce boat tail, rolls-royce cullinan 2022, rolls-royce wraith, rolls-royce song
I was visiting family in the UK and the owner wanted to show me something from a different time! I thought it would be something cool to see and a little different. So here we are!
-------
The Rolls-Royce 20/25 was the second of Rolls-Royce Ltd's pre-war entry level models. Built between 1929 and 1936, it was tremendously popular, becoming the most successful selling inter-war Rolls-Royce. Its success enabled Rolls-Royce to survive the economic difficulties of the Great Depression years and remain one of world's great brands. A total of 3,827 20/25s were produced, of which over 70% are still on the road today.
The 20/25 was the successor of the highly successful 20 hp Rolls-Royce Twenty introduced in 1922. The target market for the 20/25 was the same as the Twenty – the luxury, owner driver market. The project to develop the next generation 20 hp was code named Goshawk. The goal for the new model was to increase power & performance. This was achieved by increasing the bore size from 3 to 3.25 inches. The stroke was unchanged at 4.5 inches. This resulted in a 17% increase in capacity from 3128 to 3675cc – bring the RAC rating up to 25.4 hp.
The new 20/25 model was debuted at the 1929 Olympia Motor Show and proved to be tremendously popular becoming the greatest of the inter-war successes. There were 3827 20/25 hp produced – over twice the number of its contemporary sibling the Phantom II. The popularity of the 20/25 saved Rolls-Royce Limited during the pre-war economically difficult years. Ultimately 20/25 model was replaced by the 25/30 model in 1936 in which the bore was further increased to 3.5 inches. In 1938 the 25/30 was given a new chassis with independent front suspension and was renamed the Wraith.
Technical Specification:
Engine: In-line 6-cylinder, overhead pushrod operated valve engine with 3699cc capacity. Separate cast iron block and aluminum crankcase with detachable cast iron 6-plug head. It has an 82 mm bore with a 114 mm stroke. 7-bearing crankshaft with vibration damper. Pressure fed lubrication with relief valve feeding rocker shaft and timing gears.
Ignition System: Independent coil and standby magneto systems. 12V system 50 Amp/Hrs battery. Centrifugal advance with hand override. Distributor gap 0.017-0.021inches
Cooling System: The famous Rolls-Royce radiator with triangular top with vertical louvres, the angle of which can be adjusted to control engine cooling. To begin with, the radiator shutters were operated manually via a lever on the dash; after 1931 cars were fitted with automatic control via a thermostat. Engine driven centrifugal pump and belt-driven fan.
Carburation: A single Rolls-Royce 2-jet type with starting carburetor, automatic air valve and steering column control.
Fuel: 14 gallon rear tank increased to 18 gallon tank starting in 1932. Autovac (vacuum fed) fuel pump and an electric fuel gauge (starting in 1933).
Transmission: 4-speed gearbox, synchromesh in 3rd and top from 1932. Right hand gearchange. Single dry plate clutch. Open drive propeller shaft.
Suspension: Semi-elliptic leaf springs front and rear. Hydraulic dampers.
Brakes: Internal expanding 4 wheel operation with independent handbrake on the rear wheels. Mechanical servo motor driven from the gearbox.
Chassis lubrication: "One-Shot" Bijur centralized chassis lubrication system.
Steering: Worm and nut. (1936, Marles cam and roller - GTK 42)
1934
Single-jet expanding carburetor
Air silencer
Needle-bearing propeller shaft
Ride Control
DWS permanent jacks
Based on an Autocar Test, June 1935 on a Hooper closed-coupled Sports Saloon:
Acceleration
From rest to 50 mph through gears in 21.0 sec
From rest to 60 mph through gears in 31.4 sec
Best timed speed: 76.27 mph
Maximum Speeds in gears:
1st – 18 mph
2nd – 32 mph
3rd – 53 mph
4th – 76 mph
Petrol Consumption: Driven Hard – 14 mpg
#RollsRoyce #SportsSaloon #1934
Video Title: 1934 Rolls-Royce Sports Saloon 3499cc (My Friends Dream Car in the UK)
Video File Created Date: Monday, 14 March, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
-- Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
-- Manage and Auto-Tag your YouTube videos offline... Then upload!
-- ginkosolutions.com/youtube-bulk-uploader
-- GinkoSolutions.com
Video Tags:
rolls-royce, 1934, sports, saloon, 3499cc, my, friends, dream, car, in, the, uk, rolls-royce 1934 sports saloon 3499cc, rolls-royce 1934, freestone and webb, rolls-royce phantom, rolls-royce phantom ii, rolls-royce 20/25, bentley motors, rolls-royce sports saloon, uk cars, classic cars, classic uk cars, rolls royce, rolls-royce car, rolls-royce cullinan, rolls-royce ghost, rolls-royce boat tail, rolls-royce cullinan 2022, rolls-royce wraith, rolls-royce song

![Retrobrite: The SECRET to Restoring Yellowed Electronics and Consoles
Full video:
How To Remove Yellowing From Plastic | 3% H2O2 | Retrobrite ULTIMATE GUIDE
https://www.youtube.com/watch?v=bJZSrRU1xt4
-
Do you want to restore your yellow plastics back to their original glory? If so, keep watching!
In this video well be restoring yellowed plastics back to their original color.
Restoring yellowed plastics is sometimes known as Retro brighting, as its usually retro items which have become discolored, and we want to brighten them up again.
Retrobriting is a hot topic of debate, but the truth is, very few people have done proper testing on this subject matter, especially observing the results over long periods of time.
I did a lot of experimenting in this video and learned a lot along the way. I have shared some of this experimenting as well as my mistakes so that we can learn from this together.
In this video well be discussing:
- Why this happens
- What types of plastics will this work on?
- How to actually restore the plastics (The process)
- Something I learned and tried along the way.
- How long will this process last?
All with a primary aim of: making the process easy and also keeping things cheap and accessible.
- Hydrogen peroxide counteracts the oxidization, because it itself is an oxidizer (an oxidizing agent!). Hydrogen peroxide is one of the best oxidizing agents known to man!
- The UV light converts the hydrogen peroxide into highly reactive hydroxyl radicals, which then decompose the problematic substances.
[UV Light Wavelengths]
UVC - 200-280nm (Shortest wavelength. Classed as dangerous rays. These dont penetrate the earths ozone layer.)
UVB - 280-315nm (Mid wavelength. Causes sunburn and skin cancer etc. Classed as burning rays.)
UVA (Longest wavelength - Reaches deep inside tissue and skin, causing aging. Classed as tanning rays)
315-350nm - Uses to cure polymers. Used in printers and some tanning equipment
350-270nm - Blacklight. For bug attraction, sun tanning. etc.
370-400nm - Blacklight blue (BLB). Glow in the dark lighting. Bank note forgery checkers.
#Retrobrite #Retrobright #Retrobrighting Retrobrite: The SECRET to Restoring Yellowed Electronics and Consoles](https://i.ytimg.com/vi/X-2bwtn1uqM/mqdefault.jpg)
![Brake Hose Replacement with Brake Bleeding
***** USA (United States) Purchase Links *****
[Tools for this video]
Rust Eater Deep Penetrating Oil: https://amzn.to/46UgKiN
[Jack + Jack Stands]
3-ton Jack Stands: https://amzn.to/37v2GCM
6-ton Jack Stands (Heavy Duty): https://amzn.to/3rJRcSE
1.5 Ton Jack (Cheap): https://amzn.to/3jZGXWb
2.5 Ton Jack (Mid-Range): https://amzn.to/3jXyvXr
2.5 Ton Jack (Low Profile - For Low Cars): https://amzn.to/3xIgwwb
3.5 Ton Jack (Heavy Duty): https://amzn.to/3PumSL2
[Misc Tools]
U-Joint Set: 1/4, 3/8 and 1/2 Drive: https://amzn.to/3ambTvs
9pc Socket Extension Set: 1/4, 3/8 and 1/2 Drive: https://amzn.to/3pnvQGz
Metric Wrench Set 8mm - 22mm: https://amzn.to/4uINOWH
Socket Set 123pc Metric and Imperial - Good Quality: https://amzn.to/2NhqhL9
Socket Set Metric/SAE 23pc - Good Quality: https://amzn.to/3OuUHVS
BECOME A MEMBER OF OUR CHANNEL!
If you become a member of our channel, you get various cool and unique benefits!
Benefits:
- Early access to new videos
- A personalized shoutout in each new video during your membership
- Priority responses to your videos comments
- Access to a cool and unique emoji set
Join here: https://www.youtube.com/channel/UC0HkS2-1Tk1ULQJj3uGbjdw/join
Instagram: https://www.instagram.com/tutorialgenius
Brake Hose Replacement with Brake Bleeding
The car in the video is a Smart FORFOUR PULSE RHD 2006 1499cc (1.5L) 80Kw (454032). However, the procedures shown in the video will apply to most vehicles and applications.
SUBSCRIBE FOR MORE!
#BrakeHose #BrakeBleeding #ASMR #shorts
Video Title: Brake Hose Replacement with Brake Bleeding
Video File Created Date: 01 January 1601 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
Manage and Auto-Tag your YouTube videos offline... Then upload!
http://ginkosolutions.com/youtube-bulk-uploader/
GinkoSolutions.com
Video Tags:
brake, hose, replacement, bleeding, brake bleeding, brake fluid bleeding, brake fluid, asmr, auto repair, auto repair asmr, car repair asmr, car repair, tutorialgenius, tutorial genius, brake flushing, brake flush, collapsed brake cable, collapsed brakes, brake pedal goes to the floor, brake pedal on the floor, brake pedal doesnt work, brakes dont work, car brakes dont work, brake service, car brakes, fix car brakes, brakes not working, smart forfour, smart car Brake Hose Replacement with Brake Bleeding](https://i.ytimg.com/vi/X725oazm6B4/mqdefault.jpg)



![EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
[Parts/Tools]
Part from the Video: https://amzn.to/3hFC6bb
Flathead Screwdriver: https://amzn.to/3KgIp1r
Instagram: https://www.instagram.com/tutorialgenius
EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
The car in the video is a SATURN VUE 2007 AWD (04-07 for SATURN VUE 3.5L V6 SOHC 24V VIN CODE 4 J35 / L66). However, the procedures shown in the video will apply to most vehicles and applications.
SUBSCRIBE FOR MORE!
#GasSprings #GasStruts #LiftSupports
Tags:
How to replace Trunk Struts lift supports for any vehicle
2006 LS430 Hood And Trunk Lift Support Replacement How To
Fix Hatch/Hood/Trunk lift support DIY - Simple Easy Cheap Fast Gas Strut Lift Support replacement
How to change trunk lift supports
How to change the Hood and Trunk support struts / lift supports | Ls 430
How to Clean and Lubricate Trunk, Hood, or Hatch Struts
How to Replace Tailgate Lift Support Struts
Video Title: EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement
Video File Created Date: Wednesday, 2 March, 2022 (Video may or may not have been captured on this date, it shows the date the video was last converted.)
Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
Manage and Auto-Tag your YouTube videos offline... Then upload!
http://ginkosolutions.com/youtube-bulk-uploader/
GinkoSolutions.com
Video Tags:
easy, fix, trunk, hood, or, lift, support, gas, spring, replacement, trunk supports, gas springs, gas struts, how to replace, trunk struts, trunk lift support, hood lift support, support struts, tailgate lift, how to, diy, gas spring replacement, trunk lift support replacement, gas strut replacement, lift supports, saturn vue, tailgate supports, lift support replacement, how to replace gas springs, gas shocks EASY FIX - Trunk, Hood or Trunk Lift Supports - Gas Spring Replacement](https://i.ytimg.com/vi/XjgPXhOMm-w/mqdefault.jpg)
![How To Change a Car Tire by Hand with LIMITED Tools! (Bead Breaking & Re-Seating)
Tools used or mentioned in the video:
Scissor Lift Jack: https://amzn.to/42WR3yC
Tire Changing Kit (Tire Spoons, Rim Protectors, Valve Core Removal Tool): https://amzn.to/3ECHv1G
Portable Air Compressor: https://amzn.to/410O9Go
Helping Hands (Drop Center Tool): https://amzn.to/3CFsvQ5
Did you rip the bead? Get some Bead Sealer: https://amzn.to/4b17nk3
Want to Balance the Wheel Next? Portable Bubble Wheel Balancer: https://amzn.to/4b1RfOU
You give up? Get a Manual Tire Changer, Portable Hand Bead Breaker: https://amzn.to/3WZDriu
Learn how to change a car tire by hand with limited tools! This DIY tutorial is perfect for anyone in a rural area, facing an emergency tire situation, or simply wanting to save money. Well show you two different methods for breaking the tire bead and two methods for re-seating a tire bead, all without a tire machine. This is a must-watch for off-roaders, DIY mechanics, and anyone who wants to be prepared for a flat tire.
This video covers:
* How to change a car tire by hand
* Bead breaking techniques
* Bead seating techniques
* How to break a tire bead without a machine
* How to re-seat a tire bead without a machine
* Emergency tire repair
* DIY tire change
* Car tire removal and installation
Whether youre stuck on the side of the road, live in a remote area, or just want to learn a valuable skill, this video will show you how to change a car tire with minimal tools. No special equipment needed! Just follow our step-by-step instructions.
#tirechange #beadbreaking #carrepair #flattirerepair #diycarrepair #emergencytirechange #ruraltirefix #offroadtire #beadseating #limitedtools #notools #byhand #manualtirechange #carmaintenance #roadsideassistance #savmoney #diymechanic #tirehacks #cartire #vehicletire
[Here are referenced videos]
Wheel Balancing - Using a Manual Static Bubble Balancer
https://www.youtube.com/watch?v=1qXJgEhk6kk
Instagram: https://www.instagram.com/tutorialgenius
Video uploaded and managed using YouTube Bulk Uploader for the Lazy!
Manage and Auto-Tag your YouTube videos offline... Then upload!
Learn more: https://ginkosolutions.com/youtube-bulk-uploader/
Want to ask a question, perhaps not related to the video? Ask here: https://asqme.com/@TutorialGenius
I will answer any car mechanic question in lots of detail!
How To Change a Car Tire by Hand with LIMITED Tools! (Bead Breaking & Re-Seating)
The procedures shown in the video will apply to most vehicles and applications.
SUBSCRIBE FOR MORE!
Chapters:
0:00 Intro
0:33 Valve Stem
1:35 Bead Breaking (Drive Over Method)
4:58 Drive Over Method (When Things Go Wrong)
5:37 Bead Breaking (Scissor Jack Method)
7:31 Tire Removal (First Bead)
8:47 Tire Removal (Second Bead)
9:42 Bi-Directional?
10:10 The Drop Center / Well
10:45 Tire Mounting (First Bead)
11:42 Rim Protectors
12:26 Tire Mounting (Second Bead) Part 1
13:44 My Tire is too Small!?
14:50 Tire Mounting (Second Bead) Part 2
17:28 Re-Seating The Bead (Bounce Method)
18:10 Re-Seating The Bead (Rachet Strap Method)
19:29 Re-Seating The Bead (The BOOM Method!)
22:03 Wheel Balancing
22:19 Outtro
22:34 Easter Egg
change a car tire,
car tire change, change car tire, car tire repair, flat tire repair, tire change by hand, tire change without tools, tire change, emergency tire change, bead breaking, how to break a tire bead, how to mount a tire, bead seating, tire bead breaking, tire bead seating, break tire bead, seat tire bead, tire bead breaker, tire bead seater, diy tire change, diy car repair, car repair, car maintenance, no tools, by hand, manual tire change, how to, diy How To Change a Car Tire by Hand with LIMITED Tools! (Bead Breaking & Re-Seating)](https://i.ytimg.com/vi/YixAQy4HjGw/mqdefault.jpg)


