▼ Ortur Laser Master 15Watt problem with the Y axis @3dPrintCreator
▼ Ortur Laser Master 15Watt problem with the Y axis  @3dPrintCreator
Uploaded June 2020 | Updated November 2026, 3 days ago
This video was going to be all about the Ortur Y axis rotary roller, but when filming, I ended up having a strange problem with my Ortur Laser MAster 15Watt.

To connect the Y axis roller, I had to unplug the Y axis cable from it's stepper motor. I connected it to the Y axis roller stepper motor, and then I could not connect to the machine anymore with my computer. I disconnected the cable again from the roller, and connected it back to the Y axis stepper motor, and then a strange thing happened.

All of a sudden, the Y axis motor changed it's direction, while I am 100% sure I did not change the rotation of the plug (that is impossible). Now the Ortur Master laser engraver homes in the wrong direction, never reaching the home switch, and I can't get it back to it's original state.

I just don't know how this could have happened. I know a way to solve this, by changing the rotation of the cable, but then I have to get the four wires out of the plug and re-wire the connector.

Can anyone tell me how this could have happened? I really don't get it. The machine worked fine for months, and now it doesn't work anymore.

I am so curious to know what could have changed this setting???

Please let me know if you have the answer to this.
▼ Ortur Laser Master 15Watt problem with the Y axis▼ Project: Electronics Development Station ▼▼ how to 3d Print screw threads | Fusion 360 tutorialFrom Plain Pot to Pro Vinyl Design  | Vinyl Cutting in 40 Seconds▼ My 2 cents about the Creality GPL violation▼ The iCube Pro | The Desktop laser for makers & crafters▼ c:/JGAurora/A5/3D_Printer/Review▼ Using the Huawei Mate 20 Pro for 3D scanning | Can the Mate 20 Pro be used as a scanner? | PART 2▼ Atezr L2 24Watt Laser Review▼ Pathio Slicer, a commercial slicer from E3D. My thoughts▼ 3D Print your own camera stand | DIY Camera Stand in detail explained▼ Super fast laser engraving
3D-PrintCreator |

▼ Ortur Laser Master 15Watt problem with the Y axis

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER