Uploaded October 2020 | Updated November 2026, 1 hour ago
In this episode, we will be looking at one of the largest risks of using a laser is fire and want to share with you how after many years I have come to deal with it!
Suggested Things to have on hand:
-Aerosol Fire Extinguisher..: amzn.to/3n3LZ3Y
-Spray Bottles (Water)........: amzn.to/30jqSRJ
Also be sure to check our Ortur Laser Resource Page: diy3dtech.com/ortur-laser-resource-page
Our Preferred 450nm laser safety glasses: diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: thingiverse.com/thing:4487570
-Cable Management: thingiverse.com/thing:4488811
-Laser Focus Knob: thingiverse.com/thing:4487510
-Laser Air Assist: thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: amzn.to/3ld5CpA
-Slicone tubing for air assist: amzn.to/2Qd8xAh
-Small Air Compressor: amzn.to/3iZ5nfU
SVG Grid: diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: amzn.to/2OyhXp1
-4 Inch Blast Gate: amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: amzn.to/397sjWv
Preferred Control Software (LightBurn): lightburnsoftware.com
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: diy3dtech.com/guide-to-laser-safety-glasses
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
In this episode, we will be looking at one of the largest risks of using a laser is fire and want to share with you how after many years I have come to deal with it!
Suggested Things to have on hand:
-Aerosol Fire Extinguisher..: amzn.to/3n3LZ3Y
-Spray Bottles (Water)........: amzn.to/30jqSRJ
Also be sure to check our Ortur Laser Resource Page: diy3dtech.com/ortur-laser-resource-page
Our Preferred 450nm laser safety glasses: diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: thingiverse.com/thing:4487570
-Cable Management: thingiverse.com/thing:4488811
-Laser Focus Knob: thingiverse.com/thing:4487510
-Laser Air Assist: thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: amzn.to/3ld5CpA
-Slicone tubing for air assist: amzn.to/2Qd8xAh
-Small Air Compressor: amzn.to/3iZ5nfU
SVG Grid: diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: amzn.to/2OyhXp1
-4 Inch Blast Gate: amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: amzn.to/397sjWv
Preferred Control Software (LightBurn): lightburnsoftware.com
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: diy3dtech.com/guide-to-laser-safety-glasses
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
instagram.com/diy3dtech
-Follow us on Tumblr:
tumblr.com/blog/diy3dtech
-Follow us on Reddit:
reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
![Design Talk - When Time Runs Out 3D Print a Solution!
In this episode, we will be looking at the design principles I used in creating this clock / knick-knack / picture hanging fixture. You see, I had this clock I needed to mount on the wall and it had your typical two peg mounting system on the back. Now I have several tools to ensure proper alignment, however the process is a bit mess with drywall anchors and such and I wanted and easier way which also did less damage to the drywall so I settled on framing pins (small nails that are used with a clip to hang pictures). Yet I need a mount to do this so to 3D printing I turned! This model is parametric and designed in Fusion 360 so you can easily modify it for other applications!
If you want the Fusion 360 file, I have uploaded it to Thinigiverse here: https://www.thingiverse.com/thing:4034073
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - When Time Runs Out 3D Print a Solution!](https://i.ytimg.com/vi/nlIMGMuuy8c/mqdefault.jpg)

![LightBurn Tips - Fixing GRBL Intensity Problems!
In this episode, we will show you how to properly set the intensity values inside of LightBurn to match those of GRBL. As in the example my GRBL based laser was only outputting 1/4 of the power when set to 100% (i.e. S1000). At first we though it to be hardware issue however doing some digging we found the S-Max Value and it was set to 255 approximately 25% of the actual max value (i.e. $30=1000) which GRBL understood to be the maximum. So if your having issues with your GRBL based laser under performing this, is the first place I would suggest looking!
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Diode Laser Lens:
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: https://diy3dtech.com/G2-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech LightBurn Tips - Fixing GRBL Intensity Problems!](https://i.ytimg.com/vi/nsSXOyhlgvg/mqdefault.jpg)
![Fusion 360 Minute - Accessing the 3D Printing Slicer Workspace!
In this episode, we show you how to access the 3D printing (i.e. Additive Manufacturing) Slicer within Autodesk Fusion 360! No longer will you have to export an STL to an external slicer! Yet how do you access this new workspace? Well that is what we will show you in around a minute! If you want more Fusion 360 Minute, check out our Fusion 360 playlist here: http://diy3dtech.com/fusion_360_minute
Looking for a more cost effective alternative to the space mouse (see more here: http://diy3dtech.com/space_mouse_pro ) for Fusion 360? Well the Contour Shuttle Express (see more here: http://diy3dtech.com/ShuttleXpress ) or the Contour Shuttle Pro (see more here: http://diy3dtech.com/ShuttlePro ) is the answer! As being able to work two handed with Fusion 360 will greatly enhance your productivity! You can also find more about the setup here: https://youtu.be/EFmFUDkuDJ4
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Fusion 360 Minute - Accessing the 3D Printing Slicer Workspace!](https://i.ytimg.com/vi/ok7as-ftKdo/mqdefault.jpg)
![Ortur Laser - New Air Assist Module!
In this episode, we will be looking at new version of air assist which we created for the Ortur Laser Master (see more here: https://diy3dtech.com/ORTUR_Laser_Master ) and other like diode laser units. This unit is also designed for the longer focus G8 Lens (see more here: https://diy3dtech.com/G8-Laser-Lens ) which has a deeper focus then the stock lens.
Pieces required for this project:
Model Download: https://designstore.diy3dtech.com/ortur-air-assist-for-g8-lens-v1/
-6mm Hose: https://amzn.to/31vTgkb
-M3 Bolts: https://amzn.to/3dOEI3P
-MK8 Nozzles: https://amzn.to/31OkP8z
-Small Air Compressor: https://amzn.to/3iZ5nfU
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ortur Laser - New Air Assist Module!](https://i.ytimg.com/vi/ow82xiO16m8/mqdefault.jpg)
![Ortur Laser - Is the G8 a Miracle Lens!
In this episode, we will be looking at at replacing the stock lens of the Ortur Laser Master with a longer focus G8 lens! Many say this is the Miracle lens for the Ortur Laser Master but is it real or just an urban legend? Well we have one (see more here: http://diy3dtech.com/G8-Laser-Lens ) and will put it to the test just for you!
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ortur Laser - Is the G8 a Miracle Lens!](https://i.ytimg.com/vi/pY_7MC39qCY/mqdefault.jpg)



![Ortur Laser - Detailed Build Instructions in Less Than 15 minutes!
In this episode, we will be providing detailed build instructions for the Ortur Laser Master II (see more here: https://diy3dtech.com/ORTUR_Laser_Master ) and while this is the 20 Watt (input) version, the major of the build will apply to all versions (i.e. 7w/15w/20w) of the time. This is a step by build along video which will take you from start to finish!
Easy Link to Ortur Laser Master Manuals: https://diy3dtech.com/ORTUR_Laser_Master_manual
Add-On ORTUR Laser Master 2, Laser Engraver Y-axis Rotary Roller Engraving Module :https://diy3dtech.com/ortur_rotary_roller_engraving_module
Build Notes:
1. Read instructions (easy link to online manuals: https://diy3dtech.com/ORTUR_Laser_Master_manual ) and follow all safety guidelines.
2. The acrylic on the newer verses seems to be thinker so the old 3D printed cable managers might not fit so look for an updated version on the Design Store ( https://designstore.diy3dtech.com/ )
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Material for Laser Cutting:
Acrylic Sheets 6 Count 3mm: http://designstore.diy3dtech.com/Acrylic_Sheets_3mm
Diode Laser Lens:
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: https://diy3dtech.com/G2-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ortur Laser - Detailed Build Instructions in Less Than 15 minutes!](https://i.ytimg.com/vi/q0geT09evDc/mqdefault.jpg)
![Design Talk - Printing Upside Down For Quality!
In this episode, we will be looking printing upside down to reduce supports and increase quality! In a prior episode we printed the Apollo Astronaut (see more here: http://diy3dtech.com/design-talk-unique-support-ideas/ ) and discussed the possibilities of utilizing unique orientations for general purpose printing. Well after seeing @WinstonMakes on Instagram use the pocket CNC to machine an STL version of the SpaceX Dragon capsule out of Aluminum, I decided that would be a good model to try this process out on using the MonoPrice Mini Delta (see more here: http://diy3dtech.com/monopricemini_delta ). In addition, we used CURA and tree supports as I am playing around more and more with the tree support function CURA as a bit of an organic support engine just to see what is possible.
Thingiverse Model by Zastro: https://www.thingiverse.com/thing:1802512
Note: As I reviewed the video there where a couple additional points which we felt were worth making.
(1) This (printing upside down) works best if the bed is stationary like with a delta or core x/y. Other it would be possible for the object sway during movement as it would be top heavy.
(2) In reviewing the long time lapse video, the model did move a small amount with the print head near the end. So it was clear a certain amount of drag remained and it increased with height. The good thing is the movement was in step with the hot-end so this should be considered when printing models of this nature.
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - Printing Upside Down For Quality!](https://i.ytimg.com/vi/q3KetNGP8ew/mqdefault.jpg)