LightBurn Tips - Fixing GRBL Intensity Problems! @DIY3DTECHcom
LightBurn Tips - Fixing GRBL Intensity Problems!  @DIY3DTECHcom
Uploaded November 2020 | Updated November 2026, 46 minutes ago
In this episode, we will show you how to properly set the intensity values inside of LightBurn to match those of GRBL. As in the example my GRBL based laser was only outputting 1/4 of the power when set to 100% (i.e. S1000). At first we though it to be hardware issue however doing some digging we found the S-Max Value and it was set to 255 approximately 25% of the actual max value (i.e. $30=1000) which GRBL understood to be the maximum. So if your having issues with your GRBL based laser under performing this, is the first place I would suggest looking!

Also be sure to check our Ortur Laser Resource Page: diy3dtech.com/ortur-laser-resource-page

Our Preferred 450nm laser safety glasses: diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses

Diode Laser Lens:
Must have G8 replacement lens: diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: diy3dtech.com/G2-Laser-Lens

3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: thingiverse.com/thing:4487570
-Cable Management: thingiverse.com/thing:4488811
-Laser Focus Knob: thingiverse.com/thing:4487510
-Laser Air Assist: thingiverse.com/thing:4575561

Other useful parts:
-9mm x 0.5mm lens barrel tap: amzn.to/3ld5CpA
-Slicone tubing for air assist: amzn.to/2Qd8xAh
-Small Air Compressor: amzn.to/3iZ5nfU


SVG Grid: diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip

Ventilation Components:
-4 Inch Desktop Hood: amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: amzn.to/2OyhXp1
-4 Inch Blast Gate: amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: amzn.to/397sjWv

Preferred Control Software (LightBurn): lightburnsoftware.com

Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: diy3dtech.com/guide-to-laser-safety-glasses


Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog

Please visit DIY3DTech.com for more information on this and many other projects!

Check us out on Social Media to see what we are up too as we always have something cooking in the shop!

-Follow us on Instagram:
instagram.com/diy3dtech

-Follow us on Tumblr:
tumblr.com/blog/diy3dtech

-Follow us on Reddit:
reddit.com/user/DIY3Dtech

Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com

Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com

If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com

Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com

Tags: #DIY3Dtech
LightBurn Tips - Fixing GRBL Intensity Problems!Fusion 360 Minute - Accessing the 3D Printing Slicer Workspace!Ortur Laser  -  New Air Assist Module!Ortur Laser -  Is the G8 a Miracle Lens!Shop Talk - A Ton of Fun with my PalmGren Press!Design Talk - Creating a Dremel Adapter with 3d Printing!Shop Talk - Stop Tearing Up Your Build Surface!Ortur Laser  -  Detailed Build Instructions in Less Than 15 minutes!Design Talk - Printing Upside Down For Quality!JGAURORA Magic - Great 3D Printer Starter Kit Unboxing and Discussion!Ortur Laser  -  Free Ultra Handy USB Holder!Design Talk - 3D Printable Action Camera Cage!
DIY3DTECH.com |

LightBurn Tips - Fixing GRBL Intensity Problems!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER