Uploaded December 2024 | Updated November 2026, 2 days ago
The red part is placed on the orange rotating disk.
The green gripper orientates, clamps and brings the part to the new position.
The orientation is performed by the interaction of two green spring pins and two holes of the rotating part.
The two spring pins are connected by a bar to ensure they can only enter the holes at the same time.
The part is clamped with a vacuum device (not shown).
The red part is placed on the orange rotating disk.
The green gripper orientates, clamps and brings the part to the new position.
The orientation is performed by the interaction of two green spring pins and two holes of the rotating part.
The two spring pins are connected by a bar to ensure they can only enter the holes at the same time.
The part is clamped with a vacuum device (not shown).










