JohnSL - Random Products | Organization and Speed Handle Take 2 @JohnSL | Uploaded February 2020 | Updated October 2024, 21 hours ago.
I decided to make a new speed handle because the previous one was too loose, and would stick. I also used a larger tool for opening up the hex, so had to scrap the first version. That lead me to create a table on the mill, using magnetic tape, to keep track of what tools I have in each slot of the tool changer.
Here is the knob I used: mcmaster.com/6308k42
Magnetic tape: homedepot.com/p/Master-Magnet-1-2-in-x-10-ft-Magnetic-Tape-Roll-96274/203613125
I decided to make a new speed handle because the previous one was too loose, and would stick. I also used a larger tool for opening up the hex, so had to scrap the first version. That lead me to create a table on the mill, using magnetic tape, to keep track of what tools I have in each slot of the tool changer.
Here is the knob I used: mcmaster.com/6308k42
Magnetic tape: homedepot.com/p/Master-Magnet-1-2-in-x-10-ft-Magnetic-Tape-Roll-96274/203613125