Uploaded November 2026 | Updated November 2026, 1 day ago
Mellanox ConnectX-4 Lx is a 1/10/25 Gigabit Ethernet adapter that is fully supported by OpenWrt and is budget-friendly (for the OCP version). It has 2 x SFP28 ports that is backward compatible with SFP+ and SFP. This makes the setup even more budget-friendly as we can mixed between 10 and 25 Gigabit Ethernet.
In this video, I will walk you through the the hardware overview of the Mellanox ConnectX-4 (MCX4121A), x86 PC installation, building the OpenWrt firmware with customs driver package (kmod-mlx5-core) and the openspeedtest & iperf3 throughput when pair with a 10 Gigabit Ethernet adapter (Mellanox ConnectX-3). For this setup, the x86 PC runs OpenWrt 25.
In the next video, when parts arrive (25 GbE DAC cable & 2 more Mellanox Connect X-4), I will do a 25 Gigabit Ethernet setup with OpenWrt and we will check out the throughput, CPU usage and power consumption.
Mellanox ConnectX-3 on OpenWrt: youtube.com/watch?v=y85aUHam3eI
Build 10Gbps OpenWrt x86 PC: youtube.com/watch?v=6sfs6tvDkg4
Video timeframe:
00:00 - Mellanox ConnectX-4 Lx Overview
01:04 - Install the NIC on x86 PC (PCIe x16 slot)
01:24 - Build OpenWrt firmware with driver package (kmod-mlx5-core)
02:39 - Flash the OpenWrt image on the USB drive
02:55 - x86 OpenWrt bootup and bootlog check
03:21 - LuCI tour & network interfaces configuration
05:21 - Pre-Test Overview (Packet Steering, firewall, etc)
06:03 - OpenSpeedTest (Windows 11)
06:34 - iperf3 (Windows 11)
08:00 - Switch to ubuntu 24 to test
08:53 - OpenSpeedTest (ubuntu24)
09:20 - iperf3 throughput test (ubuntu24)
10:29 - Summary of the Test
Thanks for watching and see you in the next video!
Mellanox ConnectX-4 Lx is a 1/10/25 Gigabit Ethernet adapter that is fully supported by OpenWrt and is budget-friendly (for the OCP version). It has 2 x SFP28 ports that is backward compatible with SFP+ and SFP. This makes the setup even more budget-friendly as we can mixed between 10 and 25 Gigabit Ethernet.
In this video, I will walk you through the the hardware overview of the Mellanox ConnectX-4 (MCX4121A), x86 PC installation, building the OpenWrt firmware with customs driver package (kmod-mlx5-core) and the openspeedtest & iperf3 throughput when pair with a 10 Gigabit Ethernet adapter (Mellanox ConnectX-3). For this setup, the x86 PC runs OpenWrt 25.
In the next video, when parts arrive (25 GbE DAC cable & 2 more Mellanox Connect X-4), I will do a 25 Gigabit Ethernet setup with OpenWrt and we will check out the throughput, CPU usage and power consumption.
Mellanox ConnectX-3 on OpenWrt: youtube.com/watch?v=y85aUHam3eI
Build 10Gbps OpenWrt x86 PC: youtube.com/watch?v=6sfs6tvDkg4
Video timeframe:
00:00 - Mellanox ConnectX-4 Lx Overview
01:04 - Install the NIC on x86 PC (PCIe x16 slot)
01:24 - Build OpenWrt firmware with driver package (kmod-mlx5-core)
02:39 - Flash the OpenWrt image on the USB drive
02:55 - x86 OpenWrt bootup and bootlog check
03:21 - LuCI tour & network interfaces configuration
05:21 - Pre-Test Overview (Packet Steering, firewall, etc)
06:03 - OpenSpeedTest (Windows 11)
06:34 - iperf3 (Windows 11)
08:00 - Switch to ubuntu 24 to test
08:53 - OpenSpeedTest (ubuntu24)
09:20 - iperf3 throughput test (ubuntu24)
10:29 - Summary of the Test
Thanks for watching and see you in the next video!










