OpenWRT - Install OpenWRT on Xiaomi CR6608 Router @VanTechCorner
OpenWRT - Install OpenWRT on Xiaomi CR6608 Router  @VanTechCorner
Uploaded May 2022 | Updated November 2026, 1 day ago
Xiaomi CR6608 is a Wi-Fi6 AX1800 Router with 4 Gigabit Ethernet Ports. Besides the CR6608 which was made for China Mobile, there are also CR6606 (China Unicom) and CR6609 (China Telecom). The router is powered by the MediaTek MT7621AT with 256MB DDR3 RAM and 128MB NAND.
OpenWRT support for the Xiaomi CR660x was added by InfWang and migrated into OpenWRT master on Feb 2, 2022.
The way to install OpenWRT on the Xiaomi CR6608 is simple and doesn’t required hardware modification. However, you will need a router running OpenWRT to proceed. It is a long video, but there are only 2 main steps:
- Get SSH access to the router
- Write OpenWRT firmware with mtd
You can find the detail guide here vantc.net/install-openwrt-on-xiaomi-cr6608-router.html
After the installation, we will find out the CR6608 WAN to LAN and WiFi throughput with iperf3. The tests were done in normal firewall setting and with software/hardware offloading.

Video timeframe:

00:00 - Intro
00:46 - Download CR6608 OpenWRT firmware
01:29 - Upload xqsystem.lua on the OpenWRT router
03:37 - Configure Wireless (WiFi) on the OpenWRT router
04:42 - Set Static IP for br-lan to 169.254.31.1
07:28 - Get SSH Access to Xiaomi CR6608
10:25 - Connect SSH to Xiaomi CR6608 and unlock UART
12:02 - Upload OpenWRT firmware to CR6608 with WinSCP
13:01 - Flash OpenWRT on Xiaomi CR6608
15:08 - Connect to CR6608 OpenWRT with SSH & Install LuCI
18:17 - Login to LuCI on Xiaomi CR6608 & Initial Configuration
23:30 - WAN to LAN Throughput with iperf3 - No Offloading
24:50 - WAN to LAN Throughput with iperf3 - SW Offloading
25:35 - WAN to LAN Throughput with iperf3 - SW + HW Offloading
26:36 - Wireless (WiFi) Throughput with iperf3
29:15 - Bonus - PPPoE with VLAN Speedtest & CPU Overview

- Download Firmware: downloads.openwrt.org/snapshots/targets/ramips/mt7621
- PR ramips: add support for Xiaomi Mi Router CR660x series - github.com/openwrt/openwrt/pull/4118

Thanks for watching and see you in the next video!
OpenWRT - Install OpenWRT on Xiaomi CR6608 RouterOpenWRT - Accessing the Modem through the Router (Access Modem Behind NAT)OpenWRT 21.02 - Guest Network & Extended with Dumb AP/RouterZimaboard 2 - Unboxing & Getting StartedOpenWrt 22.03 - File Sharing with Samba4 - NVMe NAS test with NanoPi R6C(Outdated) OpenWRT - Setup Cloudflare WARP+ VPN on OpenWRT (Wireguard)Unboxing ZimaBoard SBC - A Tiny x86 ServerOpenWRT - Enable SQM QoS Chart on Netdata - Netdata Cloud Auto Start FixOpenWRT - HAP AC2 Throughput Test - WAN to LAN, WiFi, OpenVPN & WireguardOpenWRT - NanoPi R5S Overview & Initial SetupUnbox & Testing the 2.5G Intel I225-V Ethernet Adapter (Ubuntu & OpenWRT)OpenWRT - SQM QoS Setup on LuCI
Van Tech Corner |

OpenWRT - Install OpenWRT on Xiaomi CR6608 Router

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER