OpenWRT - Accessing the Modem through the Router (Access Modem Behind NAT) @VanTechCorner
OpenWRT - Accessing the Modem through the Router (Access Modem Behind NAT)  @VanTechCorner
Uploaded August 2022 | Updated November 2026, 1 day ago
Using the GPON router in Bridge mode and letting the OpenWRT router handle the WAN connection (PPPoE or DHCP client) is a typical setup nowadays. In this setup, the LAN of the OpenWRT router is in a different subnet with the IP address of the Modem/GPON router, therefore, devices in the OpenWRT's LAN won't be able to communicate with the Mode/GPON router. In order to enable the communication, you will need to configure something on OpenWRT, and this is called "accessing the Modem through the Router", or "access Modem behind NAT". In this video, I will show you how to configure this.
Basically, it is very simple. You just need to create an Interface and give it an IP address which is in the same subnet with the IP address of the Modem/GPON router. For example, the Modem is having IP address 192.168.1.1 and the new Interface on OpenWRT will have an IP address of 192.168.1.5.

Video timeframe:

00:00 - Network Diagram Overview
01:52 - Configuration with LuCI web interface
04:20 - Result - Access the Modem

For further information & CLI configuration - openwrt.org/docs/guide-user/network/wan/access.modem.through.nat

Thanks for watching and see you all!
OpenWRT - Accessing the Modem through the Router (Access Modem Behind NAT)OpenWRT 21.02 - Guest Network & Extended with Dumb AP/RouterZimaboard 2 - Unboxing & Getting StartedOpenWrt 22.03 - File Sharing with Samba4 - NVMe NAS test with NanoPi R6C(Outdated) OpenWRT - Setup Cloudflare WARP+ VPN on OpenWRT (Wireguard)Unboxing ZimaBoard SBC - A Tiny x86 ServerOpenWRT - Enable SQM QoS Chart on Netdata - Netdata Cloud Auto Start FixOpenWRT - HAP AC2 Throughput Test - WAN to LAN, WiFi, OpenVPN & WireguardOpenWRT - NanoPi R5S Overview & Initial SetupUnbox & Testing the 2.5G Intel I225-V Ethernet Adapter (Ubuntu & OpenWRT)OpenWRT - SQM QoS Setup on LuCIOpenWRT - DDNS Client - Dynamic DNS with NoIP & Namecheap
Van Tech Corner |

OpenWRT - Accessing the Modem through the Router (Access Modem Behind NAT)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER