Uploaded December 2020 | Updated November 2026, 7 hours ago
On development snapshots firmware, LuCI (Web Interface) has to be installed manually (if needed). For example, Raspberry Pi 4 B and Dlink DIR-842 C2 are running snapshot firmware for now. In this video, I am going to show you how to install LuCI in the most easiest way: Setup your router as wireless client to have a working internet connection (we can either connect to a hotspot or an AP), and then install LuCI . The most important part of the video is how to configure wireless client via SSH, which will be clearly explained in the video.
Video timeframe:
00:00 - Introduction about install LuCI on Snapshot version
01:30 - Establish the SSH connection to OpenWRT router
01:53 - Start the WiFi hotspot on phone
02:16 - Configure wireless client via SSH (2.4 and 5 Ghz Wifi)
04:00 - Add WWAN (Wireless WAN) interface to WAN Firewall zone
04:44 - Create WWAN interface
06:22 - Update packages database and install LuCI with OPKG
08:00 - Check and final words
USB to Ethernet adapter installation on OpenWRT / Raspberry Pi 4 tutorial: youtube.com/watch?v=TsOpO6O4xDE
Raspberry Pi OpenWRT TOH: openwrt.org/toh/raspberry_pi_foundation/raspberry_pi
If you need Raspberry Pi 4: my.cytron.io/p-raspberry-pi-4-model-b-4gb?tracking=vantech
Feel free to check out other unbox videos & tutorials on my channel.
If there is anything not clear or there is any question, please leave it in the comment section and we will discuss.
A small group on FB, join if you want to say hi: facebook.com/groups/786305722225040
As always, please like, share and subscribe to the channel! Thank you!
On development snapshots firmware, LuCI (Web Interface) has to be installed manually (if needed). For example, Raspberry Pi 4 B and Dlink DIR-842 C2 are running snapshot firmware for now. In this video, I am going to show you how to install LuCI in the most easiest way: Setup your router as wireless client to have a working internet connection (we can either connect to a hotspot or an AP), and then install LuCI . The most important part of the video is how to configure wireless client via SSH, which will be clearly explained in the video.
Video timeframe:
00:00 - Introduction about install LuCI on Snapshot version
01:30 - Establish the SSH connection to OpenWRT router
01:53 - Start the WiFi hotspot on phone
02:16 - Configure wireless client via SSH (2.4 and 5 Ghz Wifi)
04:00 - Add WWAN (Wireless WAN) interface to WAN Firewall zone
04:44 - Create WWAN interface
06:22 - Update packages database and install LuCI with OPKG
08:00 - Check and final words
USB to Ethernet adapter installation on OpenWRT / Raspberry Pi 4 tutorial: youtube.com/watch?v=TsOpO6O4xDE
Raspberry Pi OpenWRT TOH: openwrt.org/toh/raspberry_pi_foundation/raspberry_pi
If you need Raspberry Pi 4: my.cytron.io/p-raspberry-pi-4-model-b-4gb?tracking=vantech
Feel free to check out other unbox videos & tutorials on my channel.
If there is anything not clear or there is any question, please leave it in the comment section and we will discuss.
A small group on FB, join if you want to say hi: facebook.com/groups/786305722225040
As always, please like, share and subscribe to the channel! Thank you!










