OpenWRT - 10Gbps Routing with OpenWRT - Test Lab - Trailer @VanTechCorner
OpenWRT - 10Gbps Routing with OpenWRT - Test Lab - Trailer  @VanTechCorner
Uploaded October 2021 | Updated November 2026, 1 day ago
In this short video, I will walk you through my 10 Gbps routing test lab with OpenWRT. I am using 3 SFP+ ethernet adapters from Mellanox, the Mellanox Connect X3. 2 adapters has a single SFP+ port and 1 adapter with 2 x SFP+ ports.
With OpenWRT 21.02, the driver for Mellanox Connect is available and I just need to install kmod-mlx4-core to get the card up and running.
For Windows and Ubuntu, the drivers was built in and basically it is plug-n-play.
Due to the high workload, I don't have enough time to complete the video in this week. In the next video, I will share more detail about the SFP+ ethernet adapter, DAC/AOC cable and hardware. We will run some iperf and speedtest as well.

Thanks for watching and see you all in the next video!
OpenWRT - 10Gbps Routing with OpenWRT - Test Lab - TrailerI use the TP-Link XZ000-G3 with a different ISPOpenWRT - Raspberry Pi as Router - CPU, Wireguard, OpenVPN, WiFi Throughput & SpeedtestOpenWRT - UniFi AP Revert to Stock FirmwareOpenWrt One  - Adding the 2nd 2.5GbE Port and Throughput TestAruba - IAP-105 Factory Reset & Initial SetupIMOU Bullet Lite Camera  - Unbox, Review and Initial SetupBanana Pi BPI-R2 PRO Unboxing & Overview (OpenWRT/Android/Linux)Install OpenWrt on the Cisco Meraki MR16 & Speed TestThe NanoPi R5S - 2.35Gbps WAN to LAN Throughputyouyeetoo K1 Review: Intel N100 Modular x86 SBC with Embedded I/OOpenWRT - Install OpenWRT on Xiaomi CR6608 Router
Van Tech Corner |

OpenWRT - 10Gbps Routing with OpenWRT - Test Lab - Trailer

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER