Uploaded August 2025 | Updated September 2026, 30 minutes ago
Unboxing the OneLaser Hydra 13 | Step-by-Step Setup Series (Part 1)
What’s going on everybody! Welcome to the first video in my Hydra 13 setup series. Today, we’re unboxing the OneLaser Hydra 13 laser machine straight from the crate and walking through exactly how to get it safely unloaded and ready to roll.
In this video, you’ll see:
How the Hydra 13 arrives and what’s included in the crate (toolbox, water chiller, air ducting, accessories).
Step-by-step tips for prying open the shipping crate safely.
How to use the built-in casters and a DIY ramp method to get a 1,000-lb machine off the pallet without heavy equipment.
Real-world tricks to make unloading possible with just two people.
If you’re new to the Hydra series or considering buying your first OneLaser machine, this video will give you a clear look at what to expect when unboxing and setting up.
👉 Stay tuned for Part 2 and beyond, where we’ll continue the setup process so you can get your Hydra laser running smoothly!
💡 Thinking about buying a OneLaser X Series or Hydra machine? Use code LASERGUYS at checkout for a discount and to support the channel and our partners at Edmond’s Wood Shop and Wright’s Woodworks.
📌 Don’t forget to Like, Subscribe, and hit the Bell so you don’t miss the rest of the series!
Timestamps:
00:00 Intro
01:00 What’s inside the Hydra 13 crate
02:35 How to safely remove the crate panels
04:20 Building a ramp from the shipping panels
06:10 Rolling the Hydra 13 off the pallet
08:15 Tips for moving large laser machines without a forklift
📌 Learn more about OneLaser:
1laser.com/laserguys
Discount code: LASERGUYS
Join the OneLaser Community on Facebook!
facebook.com/groups/onelaser
Unboxing the OneLaser Hydra 13 | Step-by-Step Setup Series (Part 1)
What’s going on everybody! Welcome to the first video in my Hydra 13 setup series. Today, we’re unboxing the OneLaser Hydra 13 laser machine straight from the crate and walking through exactly how to get it safely unloaded and ready to roll.
In this video, you’ll see:
How the Hydra 13 arrives and what’s included in the crate (toolbox, water chiller, air ducting, accessories).
Step-by-step tips for prying open the shipping crate safely.
How to use the built-in casters and a DIY ramp method to get a 1,000-lb machine off the pallet without heavy equipment.
Real-world tricks to make unloading possible with just two people.
If you’re new to the Hydra series or considering buying your first OneLaser machine, this video will give you a clear look at what to expect when unboxing and setting up.
👉 Stay tuned for Part 2 and beyond, where we’ll continue the setup process so you can get your Hydra laser running smoothly!
💡 Thinking about buying a OneLaser X Series or Hydra machine? Use code LASERGUYS at checkout for a discount and to support the channel and our partners at Edmond’s Wood Shop and Wright’s Woodworks.
📌 Don’t forget to Like, Subscribe, and hit the Bell so you don’t miss the rest of the series!
Timestamps:
00:00 Intro
01:00 What’s inside the Hydra 13 crate
02:35 How to safely remove the crate panels
04:20 Building a ramp from the shipping panels
06:10 Rolling the Hydra 13 off the pallet
08:15 Tips for moving large laser machines without a forklift
📌 Learn more about OneLaser:
1laser.com/laserguys
Discount code: LASERGUYS
Join the OneLaser Community on Facebook!
facebook.com/groups/onelaser
