Uploaded February 2020 | Updated September 2026, 8 hours ago

---

This is a run through of how I make my farmhouse shiplap family name signs. All of the pieces I am cutting out of a 5mm plywood with my Co2 Laser. I have done this same process using a CNC router with 1/4" MDF. All the pieces are spray painted with 2X flat black from Home Depot. The backers are made from 1"x4"X8' MDF trim board that I am cutting down to 24". Then framing with 1"x2"s that I have cut from 2x4s that have been stained with a Minwax espresso stain.

Socials:
facebook.com/beardedbuildsco
instagram.com/beardedbuildsco

Affiliate Links:

My Laser:

OMTech Lasers:
omtechlaser.com/LGS

Affiliate code “LASERGUYS”
Coupon code “LASERGUYS5OFF”

Magnets for laser hold downs:
amzn.to/2HuhZL7

Miter Saw:
amzn.to/2OPqAfn

Table Saw:
lowes.com/pd/DELTA-10-in-Carbide-Tipped-Blade-13-Amp-Table-Saw/50081568

Saw Blades:
Miter - amzn.to/31PT0v0
Table - amzn.to/39uSG7B

Pin Nailer:
amzn.to/37oZKBn

Brad Nailer:
amzn.to/38o394L