One Shot Logic Precision with NO Edge Contacts! @ACCautomation
One Shot Logic Precision with NO Edge Contacts!  @ACCautomation
Uploaded June 2026 | Updated November 2026, 1 day ago
One-shot logic with an edge contact: fire an action for exactly one PLC scan on the rising edge of a signal โ€” precise, single-pulse triggering in ladder logic. Here's how.

โšก QUICK ANSWER
A one-shot (edge contact) passes power for exactly one PLC scan on the rising edge of a signal โ€” the instant the input goes from off to on. Instead of an output staying true the whole time an input is held, the one-shot gives you a single, precise pulse. That's essential when you want an action to happen once per event, not repeatedly every scan the input is on โ€” for example incrementing a counter once per button press, latching a value, or triggering a sequence step exactly once. A rising-edge (normally-open edge) contact fires on the off-to-on transition; a falling-edge contact fires on the on-to-off transition. Using the edge contact keeps your logic precise and prevents actions from repeating unintentionally while a signal is held. Here it's shown on the P1-M622-16DR. The full contact-and-coil walkthrough is in the guide below.

๐Ÿ“– FULL WRITTEN TUTORIAL + DOWNLOADS (contact & coil instructions)
accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions

๐Ÿ“š WHAT YOU'LL LEARN
โœ… What a one-shot (edge contact) does โ€” one pulse for a single PLC scan
โœ… How a rising-edge contact fires on the off-to-on transition
โœ… Why you use a one-shot to trigger an action once per event, not every scan
โœ… Common uses โ€” counting once per press, latching, stepping a sequence

โ“ FREQUENTLY ASKED
Q: What is a one-shot in PLC ladder logic?
A: It's an edge contact that passes power for a single PLC scan on the rising edge of a signal, giving one precise pulse instead of staying true while the input is held. The full walkthrough is in the guide.

Q: Why use a one-shot instead of a normal contact?
A: A normal contact stays true the whole time the input is on, so an action repeats every scan. A one-shot fires exactly once per event โ€” ideal for counting a press, latching, or stepping a sequence.

๐Ÿ‘‰ Full contact & coil guide: accautomation.ca/p1-m622-16dr-mini-plc-contact-and-coil-instructions

๐Ÿ”— MORE RESOURCES
โ–ถ Series: accautomation.ca/series/productivity-plc
โ–ถ PLC Beginners Guide: accautomation.ca/programming/plc-beginners-guide
โ–ถ Free eBooks: accautomation.ca (subscribe for download)

๐Ÿ›’ RECOMMENDED HARDWARE
โ–ถ Shop: automationdirect.com
โ–ถ Parts Guide: accautomation.ca/purchase-find-parts

๐Ÿ’ฌ Questions? Drop a comment below.

๐Ÿ”” New tutorials every Monday โ€” Subscribe and hit the bell!

#PLC #LadderLogic #IndustrialAutomation #PLCProgramming #ACCAutomation #ProductivityPLC #AutomationDirect #OneShot #EdgeContact #Shorts

Regards,
Garry
ACC Automation
accautomation.ca
One Shot Logic Precision with NO Edge Contacts!Everything You Need to Know About One-Shot InstructionsThe Easiest Way to Practice PLC Programming #learning #plc #engineeringSee How 5-Step PLC Controls This Entire Conveyor! #automation #coding #shortsMarriage runs like a good PID loop ๐Ÿ˜‚The Input Failure! ๐Ÿ˜‚The Real Time Reality! ๐Ÿ˜‚Motor Runtime Alarm: TMR Timer in a Start Stop Circuit!Expanding your PLC system with ease! #automation #plc #engineeringStop using AI like a magic button #programming #coding #aiAdvanced PLC Features: Shift Registers  Control Zones!Why you should NEVER trust AI with PLC code #Automation #EngineerLife
ACC Automation: PLC & Industrial Control Learning |

One Shot Logic Precision with NO Edge Contacts!

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER